WUNDER ASEP-6, ASEP-6P, ASEP-15, ASEP-15P, ASEP-30 User Manual

WUNDER SA.BI.SRL USER MANUAL

ASEP-ASEP-P INOX REV.01 15/12/2016 1

www.wunder.it

ELECTRONIC RETAIL SCALE

MODEL ASEP- ASEP-P (column)

User Manual

PLEASE READ THIS MANUAL VERY CAREFULLY

BEFORE ATTEMPT TO OPERATE THIS INDICATOR

1. INSTALLATION

2. SPECIFICATIONS

3. KEYBOARD, PANEL LAYOUT AND DESCRIPTION

4. INITIAL SETUP

5. INSTRUCTION FOR USE

6. PRINTER AND RS232C INTERFACE

7. TROUBLE SHOOTING

8. DAILY CARE AND MAINTENANCE

1. INSTALLATION

Because of metrological legislation, installation/some metrological parameter settings are limited to be done by

authorized personnel only. Do not attempt to change any of the built-in parameters. Contact your dealer for installation

and technical assistance.

WUNDER SA.BI.SRL USER MANUAL

ASEP-ASEP-P INOX REV.01 15/12/2016 2

CAUTION:

This unit is legal for trade only when it is sealed (and/or stamped) and bearing a serial number. Do not attempt to break

the seal (or stamp) affixed to this indicator or remove the serial number. Contact your dealer for more information and

after sales service.

For most accurate weighing result, do not use the scale in where or when the environment condition falls beyond as

those listed on SPECIFICATIONS.

Do not attempt to open this unit or conduct any trouble shootings other than those listed on TROUBLE SHOOTING.

2. SPECIFICATIONS

Model No.

Max

First Range

W1 x e1

Second Range

W2 x e2

ASEP-6/ ASEP-6P

6kg

3kg x 1g

6kg x 2g

ASEP-15/ ASEP-15P

15kg

6kg x 2g

15kg x 5g

ASEP-30/ ASEP-30P

30kg

15kg x 5g

30kg x 10g

ASEP-50/ ASEP-50P

50kg

30kg x 10g

50kg x 20g

ASEP-60/ ASEP-60P

60kg

30kg x 10g

60kg x 20g

Overall Resolution

6000/7500 Division

Accuracy Class

III

Tare Range

Full Tare Range

Power On Zero Range

±10% of W1

Manual Zero Range

±2% of W1

Display

Dual customer and vendor sideLCD displays

PLU Function

99 Locations: 5 External & 94 Internal (from 06~99)

Weight Digits

5 digits

Unit Price Digits

5 or 8 digits

Total Price Digits

6 or 9 digits

Operation Environment

0o~40oC Non-condensed. R.H.≤85%

Specifications subject to change without notice

WUNDER SA.BI.SRL USER MANUAL

ASEP-ASEP-P INOX REV.01 15/12/2016 3

3. KEYBOARD, PANELS LAYOUT AND DESCRIPTION

KEYBOARD DISCRIPTION

1. OFF KEY

Press this key to turn scale off.

2. ON/ZERO KEY

Press this key to a) turn scale on, and; b) set weight to zero. Refer to SPECIFICATIONS for maximum zero range.

3. TARE KEY

Press this key to tare off the weight of a container. Refer to SPECIFICATIONS for maximum tare range.

4. CLEAR KEY

Press this key to clear the numeric figure just entered or quit from function in process.

5. NUMERIC AND DECIMAL KEYS

Use these keys to attain the desired numeric value.

6. NON-WEIGHED ARTICLE KEY

Use with numeric and decimal keys to calculate total price of non-weighed articles.

7. PAID/CHANGE KEY

Press this key to recall accumulated total price or trigger the change function.

8. MEMORY PLUS KEY

Press this key to accumulate current transaction to memory.

9. MEMORY RECALL KEY

Press this key to recall individual and total stored transactions.

10. MEMORY CLEAR KEY

Press this key to clear individual or all stored transactions.

11. FIXED UNIT PRICE KEY

Press this key to enter a fixed unit price.

12. PLU SET KEY

Press this key to set a unit price to PLU, 5 external and 99 internal.

WUNDER SA.BI.SRL USER MANUAL

ASEP-ASEP-P INOX REV.01 15/12/2016 4

13. PLU RECALL KEY

Press this key with use of numeric keypads to call the 99 internal PLU locations.

PANEL DISCRIPTION

5-5-6 Digits Version

5-8-9 Digits Version

14. ZERO INDICATOR

This indicator appears when scale is at a zero weight status.

15. NET INDICATOR

This indicator appears when the tare function is in operation. The weight being displayed on the WEIGHT panel is the

net weight.

16. W1 INDICATOR

This indicator appears when the value shown on the WEIGHT panel is in the first weighing range.

17. W2 INDICATOR

This indicator appears when the value shown on the WEIGHT panel is in the second weighing range.

18. FIXED UNIT PRICE INDICATOR

This indicator appears when the fixed unit price function is in operation.

19. PAID INDICATOR

This indicator appears when scale is in the PAY mode, the value shown in the TOTAL PRICE panel is the amount to be paid

by the customer.

20. CHANGE INDICATOR

This indicator appears when scale is in the CHANGE mode, the value shown in the UNIT PRICE panel is the change to

give back.

21. MEMORY INDICATOR

This indicator appears when memory contains of stored data.

22. ACCUMULATED TOTAL PRICE INDICATOR

This indicator appears when the value being shown on TOTAL PRICE panel is the accumulated value stored.

23. LOW BATTERY INDICATOR

This indicator will appear when the power level of the rechargeable battery inside scale is low. Recharge the scale