Wulian WL-ZSPDBPW-MT-01 User Manual

Smart Contact Sensor

FOR WL-ZSPDBPW-MT-01

User Manual

©Nanjing IOT Sensor Technology Co., Ltd.

Publication Number: 2015-0407.V01

Federal Communications Commission

(FCC) Compliance Notice:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of thefollowing measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

Federal Communications Commission

(FCC) Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Federal Communications Commission (FCC)

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. In order to avoid the possibility of

exceeding the FCC radio frequency exposure limits, human proximity

to the antenna shall not be less than 20cm during normal operation.

Welcome to use Smart Contact Sensor

User Manual

●

is th

e registered trademark of Nanjing IOT Sensor Technology

Co., Ltd. All the other trademarks and registered trademarks mentioned in

this manual are trademarks or registered trademarks of their respective

owners.

●Please read this manual carefully for the proper use of this product.

●Smart Contact Sensor (hereinafter referred to as “this product”) are

smart home audio and video products produced by Nanjing IOT

Sensor Technology Co., Ltd. (hereinafter referred to as “Wulian”).

This product shall be used with smart home APP as well as the

supplied accessories. Wulian is not responsible for any loss due to

improper installation and usage of this product.

●Please check the Wulian website periodically for manual and APP

update availability and the relevance.

●Without the written permission of Wulian, any individuals and

enterprises shall not copy all or part of the contents of this manual, or

use our registered trademark. Any illegal use of our trademarks shall

be investigated according to law.

●For more information about smart home products, please visit:

www.wulian.cc/english.

1

Features

●Support IEEE 802.15.4 ZigBee/SmartRoom protocol.

●Under defense, remotely control door is open or closed, and send

real-time monitor status to smart APP.

●Make scene setting by smart APP for linkage with our other

devices.

●Alarm with wireless transmission brings about rapid response,

high anti-interference, and low rate of false alarm.

●Low consumption, energy saving, and environment friendly

for building green human living environment.

●Wireless device with small size is for hiding and merging

with home environment perfectly.

●Made of high shock-resistance and temperature-resistance

material, shell is sturdy and durable.

Product Parameter

Antenna Type

Power Parameter

Battery Type

Stand-by Current

Warning Distance

Installation Method

Material &Color

Net Weight

Flame Retardant Rating

Operating Temperature

Operating Humidity

PCB Antenna

DC 3V

CR2*1

4uA

20mm

Window Mounted

PC，

White

55

UL94 V-2

-10℃～

+45℃

≤95%RH(Noncondensing)

IEEE 802.15.4

（ZigBee/SmartRoom）

Communication Protocol

Main Body 23×19×60

Magnetic Part 10×19×60

Notes: This product supports gateway with LAN

2

Current For Opening

/Closing Door

2uA at opening door

4uA at Closing Door

Overall Dimension

(L x W x H, mm)

Package List

Manual *1

Manual

Battery *1

Guarantee

Card

PE Form Tape *2

3

( Main Body + Base Of
Main Body) *1

(Magnetic Part + Base of
Magnetic Part)*1

Flat Cross-Recessed
Self-Tapping Screw with

Pointed Tail (ST3*12)*4

Guarantee Card *1