Instruction Book
DSI Broadcasting System Transmitter
Dear Customer,
Thanks for purchasing DSI Broadcasting System.
We deeply appreciate your choice of buying our DSI, we believe
this product is going to make a positive difference in every
aspect of your life & make your work & life much more
enjoyable.
DIS Broadcasting System is one of our RF solutions, which is
technologically different than any other existing broadcasting
system in the market, of which the biggest feature is “Wireless”,
meaning there is no need for any wires between “Control Room”
& “Terminals”, so at this point, it saves you a lot of trouble of
wiring in the building. besides, for the existing systems, which
has a lot of additional equipments to achieve all the functions,
but for DSI, it doesn’t have to , we put all those things together
in DSI, so here again, it saves us a huge amount of money.
Again we sincerely thank for your kindness! Your great support
& confidence are the source of our motivation, which will
continue to encourage us to strive for the Service Concept of
“initiative”、 “excellence”、 “innovation” & constantly offer you
better quality of Services in near future! In order for you to
adequately feel all the features of this product, we strongly
suggest you to review the Instruction Book carefully prior
operating.
Cautions for Operation
The transmitter you have bought is a very high-precision product，please operate with great
care, for it to be long time used, below advices require your kind attention!
■
3Pins Socket is applied to the unit, which has a GND protection.
■
It’s got high-voltage inside, to avoid any damages，laymen are not allowed to open the
unit.
■
Please make sure to get the unit placed on stable desk and adjust the height of the 2 back
feet to give a best angle of view to operate.
■
Please keep the unit off the sunlight，or any overheated places，high temperature may
shorten the components’ life.
■
Please keep the unit at clean places
■
Please keep the unit dry，any rain or moisture may damage the circuitry on the unit.
■
Please do not transmit when there is no antenna fixed in.
.
■
Please keep the unit stay far away from the magnetic objects
■
Do not place any heavy objects on the unit, especially on the screen.
■
To protect this unit from lightning stroke，antenna is supposed to be fixed at the top roof of
the buildings where the lightning-rod is required to be mounted.
■
Please make sure there aren’t any objects blocking the ventilation windows on the left&
right side of the transmitter.
.
Content
1.Unpacking
3
2.Features
4-5
3. Removing &Assembly
4.Tech Specifications
5.Operation Guide
6.Servicing &Maintenance
7.Cautions for warranty
8.Trouble Shooting
9,Memo
10.Warranty Card
1
．．．．
Unpacking
Please take out the transmitter from the packing box cautiously & make sure there are no any
items mentioned in below list inside the box prior throwing it away. If any loss or damage
caused during dispatch, feel free to submit your claim sheet to the sender without hesitation.
Accessories
No 1 2 3 4 5 6
Power
Instruction
Item Harddisk Disk Sticker Touch Pen
Line
Book
PIC
Qty
1
1 1 1 1 1
Optional Parts
No 1 2 3 4 5 6
Item
TX
Antenna
TX Antenna
FM
Plug
Antenna
Commutator
TX Antenna
JACK
Commutator
FM Antenna
Plug
Commutator
FM Antenna
Commutator
PIC
JACK
Qty
1
1 1 1 1 1
2. Features
DSI is one multifunctional broadcasting system，which provides its user with perfect PC GUI
& LCD Touch Screen. DSI has been worldwide considered one “Reform” in the history of
“Wireless Communication” & fully achieved the technology concept of “people-oriented”
and which is now being widely used in such places as Supermarket、School、Hotel、Big
Shopping Mall & other living areas.
Functions：
1 TX can be accessed by maximum 500 RX
Telephone Alarm
Programs Auto-play
Subarea Broadcasting
Emergency Alarm System
Online Surfing
MP3 /CD/ Tuner/
Aux/Tape Input
Moni/ Rec/ Master Output
4 Microphone Input
3 power sockets supplied for external equipments
4 USB Ports
Support USB Keyboard/Mouse/Flash Memory
Illustration
Illustration
3. Removing & Assembly
●
Mechanical Installation
1．Antenna Installation
Antenna is supposed to be mounted at the top roof of the building where a lightning-rod
is a must，from which the antenna should be kept over 10 meters away，and the distance
from the TX Antenna to FM Antenna has to be beyond 2 meters as well.
■
TX Antenna Installation
Step (1):
Step (2):
Find a place to install the Bracket which is to hold the TX Antenna.
Please confirm how long the distance should be between Antenna & Transmitter,
based on which we can decide on the length of the RF cable to buy. (5mm outer diameter)
Step (3):
Step (4):
Step (5):
Connect TX Antenna Plug Commutator & Jack Commutator to the RF Cable
Fix that Jack Commutator end onto the Bracket，then mount TX Antenna on
.
it.
Connect the Plug Commutator with the TX Antenna Connector on the transmitter
to finish installing.
No
Item TX
①
Antenna
Jack
Commutator(TX)
②
③
Antenna
Bracket
④
RF
Cable
Plug
Commutaor(TX)
⑤
⑥
Antenna
Connector(TX)
■
FM Antenna Installation
Step (1):
Step (2):
Find a place to install the bracket which is to hold the FM Antenna.
Please confirm how long the distance should be between Antenna & Transmitter,
based on which we are able to decide on the length of the RF Cable to buy. (5mm outer
diameter)
Step (3):
Step (4):
Step (5):
Connect FM Antenna Plug Commutator & Jack Commutaor to the RF Cable
Fix that Jack Commutator end onto Bracket, then mount FM Antenna onto it
.
.
Connect that Plug Commutator end with FM Antenna Connector on the transmitter
to finish installing.
No
Item FM
Antenna
①
Jack
Commutator(FM)
②
③
FM
Antenna
Bracket
④
RF
Cable
Plug
Commutator(FM)
⑤
⑥
FM
Antenna
Connector
2．Fuse Assembly
Please remove the fuse holder & insert 2 fuses in it as illustrated below, “A” is for
operating, and “B” is as a spare fuse，then put the fuse holder back.
3．Height Adjustment
Adjusting the height to a most suitable level for
operation by rotating the 2 back feet of the unit,
the maximum allowable height to adjust is 2
centimeters. To lower the height by rotating
clockwise & raise the height by rotating
withershins. The feet will stop rotating when it is
up to maximum level.
●
Programs Installation
1．WIN XP Operation System Installation: First of all, connecting USB keyboard & USB
Mouse to the unit, and switch the unit on to get BIOS ready to be used, then put Win XP
Operation System Disk into CD tray, and then follow the normal installation procedures
to install.
2． Touch Screen Driver Installation: Open the random installation Disk，double click
PENMOUNTSETUP.EXE, and then using the touch pen to position on the LCD screen
after installation is finished, then exit after finishing positioning, the LCD is now
available to be used.
3．Graphics Driver Installation: Open the random installation Disk，and then open X
\DRIVER\INTER\VGA\PV1436\32\WIN2K-XP\, double click SETUP.EXE. Then
follow the normal installation procedures to install.
4．Sound Card Driver Installation: Open the random installation Disk，and then open X
\DRIVER\REALTEK\REALTEK-WOM_R227\, double click SETUP.EXE, and then
follow the normal installation procedures to install.
5．Internet Card Driver Installation: Open the random installation Disk，and then open X
\DRIVER\REALTEK\NIC\PCIE_INSTALL\, double click SETUP.EXE, and then follow
the normal installation procedures to install.
6． CD Writer Driver Installation: Open the random installation Disk，and then open X
\, double click NERO.EXE, and then follow the normal installation procedures to install.
7． DSI System Driver Installation: Open the random installation Disk，copy file DSI to C
\，open C：\DSI\，then create a shortcut key of DSI.EXE onto WINDOWS Desktop.
8．Double Click DSI shortcut icon on the Desktop to log on to DSI Operation Interface.
Congratulations! You are already officially one of our DSI users.
：
：
：
：
：
5
．．．．
Operation Guide
Illustration
6666．．．．Servicing &
Servicing & Maintenance
Servicing &Servicing &
1．（Touch TFT-LCD）
■Please keep the LCD Screen dry & clean to ensure the cursor positioning is accurate
enough .
■
Touch Screen is one high-tech precise electronic component controlled by induction, on
the surface it’s got a plastic film to product itself. Please do not operate with such sharp
stuff as Pencil、Fingertip etc, use our specified touch pen only.
■
Touch Screen is waterproof，so wet towels can be used to clean the screen surface if there
is any dust on it, but remember not to use any cloth made of coarse materials.
2．CD-ROM（ODD）
■
Please keep the unit steady during the process of Disk reading, doing so just to avoid any
damages accidently caused to the CD-ROM by high-speed moving of the Disk.
■
Please take great care when inserting the Disk into the tray, hold the CD tray stably with
Maintenance
MaintenanceMaintenance
1 hand & place the Disk right into the tray with the other hand just in order not to cause
any deformation to the tray.
■
Please take out Disk prior shutting the unit down to make sure there won’t be any
damage caused accidently to the laser head when you move the unit.
■
please get the CD-ROM cleaned up by special cleaning Disk only & do regular cleaning
of the laser head .
3．Water Treatment
■
Once water goes in, switch off the unit immediately to avoid further damage .
■
Remove the power line right away & other external equipments (if any).
■
Get the water poured out of the unit & give it a careful wipe with napkins or towels.
■
Blow into the fan guard & filter on left & right side of the unit by the Fanner, please bear
in mind not using a hairdryer to blow & deliver it to the authorized Service Network without
further delay to have the well-trained professionals handle it.
4．Cleaning Maintenance
■
Please make sure to keep following steps in mind prior doing the cleaning maintenance：
Step1：Switch off the unit, and then remove the power line.
Step2：Using a small vacuum cleaner to get the dust in the gaps of the Connectors、Buttons
Knobs and the like absorbed.
Step3：Give the unit surface a soft wipe by using the slightly wetted dry towels, do not let
any cleaning agent go inside the housing, otherwise the circuit may get short &
burned.
Step4：Do not switch ON the unit until it is entirely dry.
、
7777．．．．Cautions for warranty
Cautions for warranty
Cautions for warrantyCautions for warranty
1．Only 1 year warranty period is guaranteed.
2. If during this period of guarantee the product you have bought proves defective due to
improper materials or workmanship, our authorized Service Station or authorized Service
Dealer in your country will without charge for labor or parts repair or replace the product
or its defective parts. Our guarantee of free of charge service doesn’t cover following
terms and conditions, any repairing or replacing towards below problems & malfunctions
will be charged accordingly.
A．Damages caused by natural disaster (water、fire、earthquake、lightning、typhoon etc),
or any improper use that is beyond the control of our company.
B．Problems & malfunctions caused by removing& assembly、repairing done by user
himself or test & maintenance conducted by any non-authorized Service Stations.
C．Any adaptation or changes to upgrade the product from its normal purpose as described
in the Instruction Book without the prior written consent of our company.
D．Problems & malfunctions caused by improper settings or Drivers installations done by
user himself.
E．Problems & malfunctions caused by Internet virus
F．Identification Tag or type or serial number or warranty card of the product has been
altered、deleted、removed or made illegible.
G．Problems & malfunctions caused by other improper operation.
3．A very fast servicing & repairing is offered by our dealer as soon as the receipt of your
defective product.
4．The software Disk dispatched together with the product is an All-in-one Disk, into which
.
the DSI System Driver、Computer Main board Driver、Touch Screen Driver and CD
Writer Driver are incorporated. Any actions of purchasing are declined by us if that Disk
developed any damage.
8
．．．．
Trouble Shooting
Malfunctions Solutions
Can’t be switched ON
No signals picked up
Receiving Intermittently
No radio programs
searched
System Halted
1. Please check whether the power line is being connected
well.
2. Please check whether the fuse has been blown.
1. Please check whether the TX Channel No is in accord
with RX’s.
2. Please check whether the “Group” of that RX has been
activated on the TX.
3. Please make sure to press “MASTER” prior
transmitting.
1. Please check whether the transmitting power has been
changed.
2. Please check whether the TX antenna cable is being
connected well.
Please check whether the antenna cable is being connected
well.
1. Pressing “Power ON” switch to re-start the unit.
2. Switch off the power supply, and then switch on again.
Note: The user’s manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment. In cases where the manual is provided only in a form other than paper,
such as on a computer disk or over the Internet, the information required by this
section may be included in the manual in that alternative form, provided the user can
reasonably be expected to have the capability to access information in that form.
RF Exposure Warning Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in fixed station exposure condition without restriction.
The safety separation distance of the fixed station device is at lease 100 cm, Please put
the product in the coorect and safety location.
Memo
DSI Broadcasting System Warranty Card (Customer’s Receipt)
Thanks for purchasing our DSI Broadcasting System， in the event that any
after-sales services are needed, you are required to contact the dealer from whom it
was purchased or a member of our authorized Service Network either via Website or
Telephone.
1. Please visit our website given below:
www. alltech.co. th.
2. Please reach our Technical Support Service at the number given below:
Tele: 02-508-2472 Fax: 02-948-4842
Purchasing Date： Y M D
Dealer Tele：
Dealer Address:
Sales person：
Dealer（Stamp）:
*Null & void without dealer’s stamp
*Above blanks are supposed to be completed by the Dealer.
*Please make sure the above said purchasing date is in accord with the date on the
invoice.
* “Warranty Card-Customer’s Receipt” kept by customer himself.
DSI Broadcasting System Warrant Card (Dealer’s Return Receipt)
User Information：
*Name：
□MS Company:
□MR
*Tele: *Cell:
*E-mail:
*Province:
Postal Code:
Address:
*For the customer’s rights & interests to be protected, above*marked
items are required to be completed after confirmation with customer.
Dealer Information:
Company：
Salesperson：
Tele： - Ext:
Purchasing Date:
Y M D
Dealer（Stamp）：
*Null &Void without dealer’s stamp
*Above blanks are supposed to be completed by the Dealer.
*This “Warranty Card(Dealer’s Return Receipt) is required to be filled out &
cut off by Dealer & has to be shipped to Alltronics within 15 days from the
time of purchasing.
Loading...