This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
1.) This device may not cause harmful
interference.
2.) This device must accept any
interference that may be received,
including interference that may
cause undesired operation.
READ THIS MANUAL
Every effort has been made to insure that
this WTI system is of the highest quality.
This product has been carefully inspected
to comply with rigid quality standards
before shipment to you. In consideration of
your investment and the desire to obtain
full performance capability engineered into
your new WTI product, we recommend that
you read this manual before attempting to
operate your system.
INFORMATION
FOR MORE ASSISTANCE OR MORE
INFORMATION
WTI (Wireless Technology, Inc.)
2064 Eastman Avenue, Suite 113
Ventura, CA 93003-7787
The software / firmware furnished with the
equipment is confidential to and is
copyrighted by Wireless Technology, Inc. (WTI)
It is not to be copied or disclosed in any
manner without the consent of Wireless Technology, Inc. (WTI). The software/firmware
is furnished to the purchaser under a
license for use on a single system.
Information furnished by Wireless Technology, Inc. (WTI) is believed to be accurate and
reliable. However, no responsibility is
assumed by Wireless Technology, Inc. (WTI) for
its use or for any infringements of other
rights of third parties, which may result
from its use. No license is granted by
implications or otherwise under any patent
or patent rights of Wireless Technology, Inc. (WTI)
We appreciate your purchase of Wireless Technology, Inc. (WTI) security products. We take pride in
the quality of our products and have manufactured each new WTI product to exacting quality
standards. In normal use, it will provide you with years of satisfactory performance. However,
should you experience difficulty; you are protected under the provisions of this warranty.
WTI warrants to the original user a product that is free of defects in materials and
workmanship in normal use. WTI warrants to the original user that WTI’s products will be free
of defects in materials and workmanship in normal use for a period of 12 months from the
date of sale. WTI’s obligation under this warranty shall be limited to the repair, including all
necessary parts and the cost of labor connected therewith, or at our option, the replacement of
any product that shows evidence of a manufacturing defect within the warranty period.
This warranty is extended to all WTI products purchased and used within the United States of
America and is valid only when service is rendered by the authorized WTI (Wireless Technology, Inc.) Warranty Station.
This warranty shall not apply to appearance or accessory items including, but not limited to,
knobs, connectors, cabinets and connecting cables. This warranty shall not, in addition, apply
to repairs or replacements necessitated by any cause beyond the control of WTI including, but
not limited to, acts of nature, improper installation, misuse, lack of proper maintenance,
accident, voltage fluctuations, unauthorized repairs or modifications.
This warranty becomes void in the event serial numbers are altered, defaced or removed, or an
attempt is made to field service or alter performance of any WTI products.
WTI reserves the right to make changes in design, or to make additions to, or improvements
upon, products without incurring any obligation to install the same on products previously
manufactured.
The foregoing is in lieu of all other warranties expressed or implied and WTI neither assumes
nor authorizes any person to assume for it any other obligation or liability in connection with
the sale of our products. In no event shall WTI or its Authorized Dealers be liable for special or
consequential damage arising from the use of this product, or any delay in the performance of
this warranty due to causes beyond its control.
Please contact Wireless Technology, Inc. (WTI), to obtain a repair authorization number (RA) and
provide the following information:
1.) Product Model & Serial Numbers.
2.) Date of shipment, purchase order number, sales order number or WTI invoice number.
3.) Details of the defect or malfunction. If there is a dispute regarding the warranty or
product, which does not fall under the warranty conditions stated within the
description of the written warranty, please include a written explanation with the
product when returned.
SHIP FREIGHT PRE-PAID TO:
WTI (Wireless Technology, Inc.)
2064 Eastman Avenue, Suite 113
Ventura, CA 93003-7787
TEL 805/339-9696
FAX 805/339-0932
RETURNS
No unauthorized returns will be accepted. All returns must have an authorized (RA) number
issued by the factory (CA number if returned for credit and RA number if returned for repair).
Products returned for repair or credit will be rejected if no authorization number has been
issued or freight has not been pre-paid. All merchandise returned for credit will be subject to a
20% restocking and refurbishing charge.
The Sidewinder SW720A is a pan-tilt-zoom camera system that provides day/night color or
black and white standard definition NTSC (PAL optional) video. The day/night feature can be
set for manual or automatic operation. The camera provides 360 degree rotation in both the
pan and tilt axes, and provides an optical zoom magnification of 35 times. A self-cleaning
hydrophilic coating is provided on the front lens window of the camera to ensure clear, crisp
video images and to reduce maintenance. An Indium-Tin-Oxide coating is provided on the
inside of the front lens window to heat it and prevent fogging.
The Sidewinder SW720A camera operates on AC line voltages within a voltage range of 85VAC
to 265VAC and an operating frequency of 47Hz to 63Hz. All camera signals, including power,
communication and video, are provided on a 16 pin circular plastic connector or an18 pin
circular MS style connector mounted at the end of a 36 inch umbilical cable exiting from the
bottom of the camera.
The Sidewinder SW720A camera uses a 4 wire full duplex RS-485 or RS-422 compatible
communication link to provide pan-tilt-zoom control and to allow setting of all of the presets,
tours and other camera features. While basic pan-tilt-zoom operation can be implemented
with only a two wire uni-directional interface, it is recommended that the camera be provided
with the full 4 wire interface to enable the more advanced features, such as remote firmware
uploading and camera status queries.
The SW720A camera supports industry standard COHU and Pelco setup and command codes
sets. NTCIP Code support can be provided as an option. Please contact the factory for code
support information.
Unpacking
Please examine the equipment carefully when unpacking the shipping container. If any
damage is noted please be sure to file a claim with the carrier. WTI is not responsible for any
damage that occurs during shipping. Please verify that all of the contents are present and
carefully check the packing material for any loose items before recycling it.