Assembly Instructions
Caution: You must read this before you proceed
Table
Caution: This Table is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Table and to prevent damage to the Table, two adults are needed to execute
this action.
1 ____
Label Picture Description QTY
A Table Top 1
B Leg 3
Label Picture Description QTY
① Bolt (M6x55mm) 4
② Washer 4
③ Allen Key 1
Assembly Preparation
Parts List
Before Beginning Assembly:
Hardware
2 ____
Unpack and place all parts on a clean, non-marring surface.
Overview
Step 1
This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of
the Table parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Assembly Steps
Leg (B)
Table Top (A)
FRONT FACING
3 ____
Step 3
Stand the Table up, with assistance from your adult partner.
Exert pressure floorwards, onto the Table with both your hands.
This pressure will help the Legs and Table Top reach full alignment status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts in a sequential manner, until evenly secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and excute the same above process.
If the Table is not Stable it could lead to damage to the product.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Place Table Top(A) facedown, onto a clean, non-marring surface.
Attach Leg(B) to Table Top(A) using Bolt(①), and Washer(②) with Allen Key(③).
Do not fully tighten the Bolt.
Repeat the same process with the remaining two Legs(B).
Step 2
4 ____
5 ____
Loading...