ASSEMBLY INSTRUCTIONS
TOP POLE
BOTTOM
POLE
BASE
BULB
CONGRATULATIONS!
You have just purchased one of the best lighting products available in
the market.
For your safety, please follow the instruction in below.
ASSEMBLY INSTRUCTIONS:
NOTE:
The electrical wire is connected continuously through
the poles. Do not pull the wires during the unpacking.
Bad connections may result. The assembly process is much
easier to complete when performed by two people.
1.Lay out lamp parts on the floor as shown in the illustration.
2.Thread the Bottom Pole onto the Base, then put the Top Pole
onto the Bottom Pole.( Gently pull the excessive wire from the Bottom
of the Base if necessary )
3.Place the LED Bulbs ( Included ) into the Light Bulb Sockets.
WARNING:
For your long lasting uses, please use our approved LED Light Bulbs only.
Other brands may not be compatible with our LED lamp, therefore void the
manufacturer warranty that comes with this lamp.
Loading...