WRANGLER Performance Catalog

PERFORMANCE PRODUCTS for the JEEP

GLADIATOR JT, and GEN6 FORD BRONCO

®

WRANGLER JK and JL,

®

1

TABLE of CONTENTS

Axle Identification ...................................................................................2-3

The Ultimate Dana 60 Axles for Jeep ......................................................4-5

The Ultimate Dana 44 AdvanTEK Axles for Jeep .....................................6-7

The Ultimate Dana 44 Front Axles for the Jeep JK. .................................8-9

The Ultimate Dana 60 Semi-Float Axles for Jeep .............................. 10-11

AXLE IDENTIFICATION

JEEP® WRANGLER JL AXLE IDENTIFIER

Trim

Sport/Sahara

Sport/Sahara

Sport/Sahara

Rubicon

Engine Front Diff Rear Diff

3.6L V6 and 2.0L Turbo Open Open

3.6L V6 and 2.0L Turbo Open Trac-Lok

3.0L Diesel Open Trac-Lok

3.6L V6/3.0L Diesel ELD ELD

™

LSD Dana 30

™

LSD Dana 44

The Ultimate Dana 60 Bracketless Crate Axles. ................................. 12-13

The Ultimate Dana 80 Rear Bracketless Crate Axle ........................... 14-15

Dana Builder Axle Program ................................................................ 16-17

Dana and Spicer Performance Products for Gen6 Ford Bronco ......... 18-22

The Ultimate Dana 44 AdvanTEK Front-Drive Unit (FDU) .........................19

Spicer Extreme Half Shafts ...................................................................... 19

The Ultimate Dana 60 Semi-Float Axles for Bronco. .......................... 20-21

Spicer AdvanTEK Gearing for Bronco .......................................................21

Spicer Performance Driveshafts for Bronco. ............................................22

Spicer Driveshafts for Jeep. .....................................................................23

Spicer Two-Piece 1350 Series Driveshaft for Gladiator JT ......................24

Spicer Nickel Chromoly Axle Shafts for Jeep ...........................................25

Spicer Ring & Pinion Gearing for Dana 30 and 44 Axles ..........................26

Spicer AdvenTEK Gearing for JL, and Gladiator JT. ................................. .27

JEEP® WRANGLER JK AXLE IDENTIFIER

Trim

Sport/Sahara

Sport/Sahara

Rubicon

Engine Front Diff Rear Diff

3.6L Open Open

3.6L Open Trac-Lok

3.6L ELD ELD

JEEP® GLADIATOR JT AXLE IDENTIFIER

Trim

Sport/Sport S

Overland

Rubicon

Engine Front Diff Rear Diff

3.6L Open Open/Optional Trac-Lok

3.6L Open Open/Optional Trac-Lok

3.6L ELD ELD

JEEP® WHEEL JOINT IDENTIFIER

Application

Jeep Wrangler TJ 2006 & Down

Jeep Wrangler JK 2007 - 2011

Jeep Wrangler JK 2012 - 2018

Jeep Wrangler JL 2019 & Up

Ultimate Dana 60® Crate Axles

Ultimate Dana 44™ JK Crate Axle

Ultimate Dana 44™ AdvanTEK® JL/JT Crate Axle

™

LSD Dana 30

™

™

U-Joint Series

1310

1310

1350

1350

SPL70

1350

1410

Spicer SPL U-joints for Jeep .................................................................... 28

Spicer SPL Plus U-joints for Jeep ............................................................29

Spicer Exteme U-joints ............................................................................29

Spicer Performance Differential Covers for Jeep ..................................... 30

Victor Reinz Victor-Lock Differential Gaskets ...........................................31

Victor Reinz Reinzosil Universal RTV .................................................. 32-33

The Dana-Jeep Story ............................................................................... 34

The Dana-Bronco Story ........................................................................... 35

2

2

FORD® BRONCO® AXLE IDENTIFIER

Trim

®

Big Bend

Black Diamond

Outer Banks

Heritage Edition

Badlands

Everglades

Wildtrak

Heritage Edition Limited

Raptor

™

®

®

®

®

®

Engine Front Axle

2.3L EcoBoost® I-4 Dana 35™ AdvanTEK® FDU Dana 44

2.3L EcoBoost® I-4 Dana 35™ AdvanTEK® FDU Dana 44

2.3L EcoBoost® I-4 Dana 35™ AdvanTEK® FDU Dana 44

2.3L EcoBoost

2.3L EcoBoost® I-4 Dana 44™ AdvanTEK® FDU Dana 44

2.3L EcoBoost® I-4 Dana 44™ AdvanTEK® FDU Dana 44

2.7L EcoBoost® V6 Dana 44™ AdvanTEK® FDU Dana 44

2.7L EcoBoost

3.0L EcoBoost® V6 Dana 44™ AdvanTEK® FDU Dana 44

®

I-4 Dana 44™ AdvanTEK® FDU Dana 44

®

V6 Dana 44™ AdvanTEK® FDU Dana 44

Front Axle Rear Axle

™

Dana 30

™

™

AdvanTEK®Dana 44™ AdvanTEK

Dana 35™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK®Dana 44™ AdvanTEK

Front Axle Rear Axle

Dana 30

Dana 44

™

™

™

Dana 44

Dana 44

Dana 44

™

™

™

®

®

®

®

Front Axle Rear Axle

Dana 44™ AdvanTEK®Dana 44™ AdvanTEK

Dana 44™ AdvanTEK®Dana 44™ AdvanTEK

Dana 44™ AdvanTEK®Dana 44™ AdvanTEK

Spicer Part # Blue Coated Part #

5-760X 5-760XC

5-760X 5-760XC

5-7166X 5-7166XC

5-7166X 5-7166XC

SPL70-4X SPL70-1550XC

5-7166X 5-7166XC

5-1410-3X -

Rear Axle

™

™

™

™

™

™

™

™

™

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

AdvanTEK

®

®

®

®

®

®

®

®

®

®

®

®

3

Warn® 35-spline

hub locks

Heavy-duty 8 x 6.5"

wheel bolt pattern

9/16-18 thread

High-mount

steering arm

35-spline SAE-4340

nickel chromoly steel

axle shafts

The Ultimate Dana 60™
Axles for Jeep

Get the confidence you need to scale rocks, splash

through ravines, and conquer off-camber terrain

with the axles that are stronger than factory axles:

Ultimate Dana 60 axles for Jeep Wrangler JK, JL,

and Gladiator JT. Ultimate Dana 60s can take all

the beatings you dish out. Everything about these

axles is heavy duty, from the brakes to the wheel

bolt pattern to the brackets.

4

4

Scan here to learn more!

®

High-strength,

heavy-gauge

brackets

THE ULTIMATE DANA 60™ CRATE AXLES (BOLT-IN AXLE ASSEMBLY)

Application

2007-2018 Wrangler JK - 3.73 Ratio with Eaton ELocker

2007-2018 Wrangler JK - 4.10 Ratio with Eaton ELocker

2007-2018 Wrangler JK - 4.88 Ratio with Eaton ELocker

®

2007-2018 Wrangler JK - 4.88 Ratio with ARB

Air Locker

2007-2018 Wrangler JK - 5.38 Ratio with Eaton ELocker

®

2007-2018 Wrangler JK - 5.38 Ratio with ARB

Air Locker

2018 and Newer Wrangler JL - 3.73 Ratio with Eaton ELocker

2018 and Newer Wrangler JL - 4.10 Ratio with Eaton ELocker

2018 and Newer Wrangler JL - 4.88 Ratio with Eaton ELocker

2018 and Newer Wrangler JL - 5.38 Ratio with Eaton ELocker

®

2018 and Newer Wrangler JL - 4.88 Ratio with ARB

2018 and Newer Wrangler JL - 5.38 Ratio with ARB

Air Locker

®

Air Locker

2020 and Newer Gladiator JT - 3.73 Ratio with Eaton ELocker

2020 and Newer Gladiator JT - 4.10 Ratio with Eaton ELocker

2020 and Newer Gladiator JT - 4.88 Ratio with Eaton ELocker

2020 and Newer Gladiator JT - 5.38 Ratio with Eaton ELocker

®

2020 and Newer Gladiator JT - 4.88 Ratio with ARB

2020 and Newer Gladiator JT - 5.38 Ratio with ARB

Air Locker

®

Air Locker

Front Part # Rear Part #

®

10034267 10034269

®

10034268 10034270

®

10005778 2023612-1

®

10033062 10032016

®

10005777 10005942

®

10033061 10032017

®

10056042 10048757

®

10056043 10048758

®

10056032 10048764

®

10056030 10048784

®

10088914 10088916

®

10088915 10088918

®

10056042 10128129

®

10056043 10128131

®

10056032 10128143

®

10056030 10128137

®

10088914 10128139

®

10088915 10128141

RELATED PARTS

Description

E-Locker Wire Harness Kit

JT Front Driveshaft - 1350 Series (Long Slip)

JT Rear Driveshaft - 1350 Series

Performance Nodular Iron Diff Cover (with hardware) - Front UD60

Performance Nodular Iron Diff Cover (with hardware) - Rear Dana 60

Steering Arm Kit - Front UD60

Wheel Joint - 1550/SPL70

Dana 60 35 Spline Drive Flange Kit

Dana Blue Wheel Joint - 1550/SPL70

Ball Joint Kit - Upper and Lower for One Side

U-Joint Strap Kit

End Yoke Assembly

Axle Shaft Assembly Left/Driver

Axle Shaft Assembly Right/Passenger

Spicer Part #

10021771

10097841

10132306

10024011

10024090

10024009

SPL70-4X

10028883

SPL70-1550XC

2016801

3-70-28X

10015235

10004053

10004054

5

5

Upgraded inner Cs

Spicer® performance

ball joints

The Ultimate Dana 44™

®

AdvanTEK

Freedom to go where you want and the confidence

that you’ll be ready for the next adventure: that’s

what you get with the Ultimate Dana 44™ Advan-

TEK® axle for the Jeep® Wrangler JL and Gladiator

JT. Dana’s exclusive AdvanTEK® gear technology

provides greater power density and fuel efficien-

cy than similar offerings, while reducing driveline

weight. Trust the aftermarket axle that’s manufac-

tured to OE specs, from the OE axle provider for

Jeep since the very beginning: Dana.

6

6

Scan here to learn more!

Front Axle

THE ULTIMATE DANA 44™ ADVANTEK® FRONT CRATE AXLES
(BOLT-IN AXLE ASSY. FOR JL)

Application

2018 and Newer Jeep Wrangler JL - 5.38 Ratio with Electric Locker

2018 and Newer Jeep Wrangler JL - 5.13 Ratio with Electric Locker

2018 and Newer Jeep Wrangler JL - 4.88 Ratio with Electric Locker

2018 and Newer Jeep Wrangler JL – 4.56 Ratio with Electric Locker

2018 and Newer Jeep Wrangler JL - 4.10 Ratio with Electric Locker

THE ULTIMATE DANA 44™ ADVANTEK® FRONT CRATE AXLES
(BOLT-IN AXLE ASSY. FOR JT)

Application

2020 and Newer Jeep Gladiator JT - 5.38 Ratio with Electric Locker

2020 and Newer Jeep Gladiator JT - 5.13 Ratio with Electric Locker

2020 and Newer Jeep Gladiator JT - 4.88 Ratio with Electric Locker

2020 and Newer Jeep Gladiator JT - 4.56 Ratio with Electric Locker

2020 and Newer Jeep Gladiator JT - 4.10 Ratio with Electric Locker

Front Axle Part #

10047719

10047718

10047717

10047716

10047715

Front Axle Part #

10047719

10047718

10047717

10047716

10047715

Upgraded inner Cs

Spicer® performance

ball joints

RELATED PARTS

HD 1350 Series Front Driveshaft

Spicer Performance Ball Joint Kit (one side)

Premium Spicer Life Series

Description

®

Universal Joint (1410 Non-Greasable)

Spicer Part #

10097840

10048946

5-1410-3X

7

7

Upgraded inner Cs

The Ultimate Dana 44™
Front Axles for the
Jeep

Engineered for all 2007 to 2018 Jeep Wrangler JKs,

Ultimate Dana 44™ front axles feature a number of

upgrades designed for added durability on the trail.

Get a direct bolt-in solution that delivers increased

strength wherever you take your vehicle.

8

8

Wrangler JK

®

Scan here to learn more!

THE ULTIMATE DANA 44™ FRONT CRATE AXLES
(BOLT-IN AXLE ASSY. FOR JK)

Application

2007-2018 Wrangler JK - 3.73 Ratio with Electric Locker

2007-2018 Wrangler JK - 3.73 Ratio with Std. Diff

2007-2018 Wrangler JK - 3.73 Ratio with ARB

2007-2018 Wrangler JK - 4.10 Ratio with Electric Locker

2007-2018 Wrangler JK - 4.10 Ratio with Std. Diff

2007-2018 Wrangler JK - 4.10 Ratio with ARB

2007-2018 Wrangler JK - 4.56 Ratio with Electric Locker

2007-2018 Wrangler JK - 4.56 Ratio with Std. Diff

2007-2018 Wrangler JK - 4.56 Ratio with ARB

2007-2018 Wrangler JK - 4.88 Ratio with Electric Locker

2007-2018 Wrangler JK - 4.88 Ratio with Std. Diff

2007-2018 Wrangler JK - 4.88 Ratio with ARB

2007-2018 Wrangler JK - 5.13 Ratio with Electric Locker

2007-2018 Wrangler JK - 5.13 Ratio with Std. Diff

2007-2018 Wrangler JK - 5.13 Ratio with ARB

2007-2018 Wrangler JK - 5.38 Ratio with Electric Locker

2007-2018 Wrangler JK - 5.38 Ratio with Std. Diff

2007-2018 Wrangler JK - 5.38 Ratio with ARB

®

Air Locker

®

Air Locker

®

Air Locker

®

Air Locker

®

Air Locker

®

Air Locker

Front Axle Part #

®

®

®

®

®

®

10010519

10032861

10048820

10010455

10032862

10048821

10010520

10032863

10048822

10010521

10032864

10048823

10010522

10032865

10048824

10010742

10032866

10048825

Upgraded inner Cs

RELATED PARTS

Description

E-Locker Wire Harness Kit

HD Front Driveshaft 0-2" Lift (with T-Case Yoke & Hardware)

HD Front Driveshaft 2-4" Lift (with T-Case Yoke & Hardware)

Blue Nodular Iron Differential Cover

Dana Blue Wheel Joint

OE Integration Crate Axle E-Locker Wire Harness

Spicer Part #

10021771

10018230

10020345

10048739

5-7166XC

10056733

9

9

Bolt-in, plug-in axles for Jeep®
Wrangler JK, JL, and Gladiator JT

5- or 6-wheel

lug patterns

Raised track bar

mounting location

Double-row tapered roller

axle bearings

Spicer® 9¾˝ (248mm)

ring and pinion

gear inside

Available with either an

®

ELocker® or

Eaton

ARB

®

Air Locker

®

The Ultimate Dana 60™
Semi-Float Axle

The Ultimate Dana 60™ Semi-Float Axle delivers all

the benefits—like Spicer® ring and pinion gearing,

heavy-duty brackets, and more—and all the con-

venience of adhering to a semi-floating axle design:

get a direct-fit, bolt-in solution and reuse your

wheels and brakes.

10

10

Scan here to learn more!

THE ULTIMATE DANA 60® SEMI-FLOAT AXLE® ASSEMBLY JEEP

Application Ratio Locker

Jeep Wrangler JK 3.73 E-Locker

Jeep Wrangler JK 4.1 E-Locker

Jeep Wrangler JK 4.56 E-Locker

Jeep Wrangler JK 4.88 E-Locker

Jeep Wrangler JK 5.38 E-Locker

Jeep Wrangler JK 4.56 ARB Air Locker

Jeep Wrangler JK 4.88 ARB Air Locker

Jeep Wrangler JK 5.38 ARB Air Locker

Jeep Wrangler JL 3.73 E-Locker

Jeep Wrangler JL 4.1 E-Locker

Jeep Wrangler JL 4.56 E-Locker

Jeep Wrangler JL 4.88 E-Locker

Jeep Wrangler JL 5.38 E-Locker

Jeep Wrangler JL 4.56 ARB Air Locker

Jeep Wrangler JL 4.88 ARB Air Locker

Jeep Wrangler JL 5.38 ARB Air Locker

Jeep Gladiator JT 3.73 E-Locker

Jeep Gladiator JT 4.1 E-Locker

Jeep Gladiator JT 4.56 E-Locker

Jeep Gladiator JT 4.88 E-Locker

Jeep Gladiator JT 5.38 E-Locker

Jeep Gladiator JT 4.56 ARB Air Locker

Jeep Gladiator JT 4.88 ARB Air Locker

Jeep Gladiator JT 5.38 ARB Air Locker

Part #

SF-L60JK373E-69

SF-L60JK410E-69

SF-L60JK456E-69

SF-L60JK488E-69

SF-L60JK538E-69

SF-L60JK456A-69

SF-L60JK488A-69

SF-L60JK538A-69

SF-L60JL373E-69

SF-L60JL410E-69

SF-L60JL456E-69

SF-L60JL488E-69

SF-L60JL538E-69

SF-L60JL456A-69

SF-L60JL488A-69

SF-L60JL538A-69

SF-L60JT373E-69

SF-L60JT410E-69

SF-L60JT456E-69

SF-L60JT488E-69

SF-L60JT538E-69

SF-L60JT456A-69

SF-L60JT488A-69

SF-L60JT538A-69

®

Spicer® 1350

Strap-style/half-round

end yoke

THE ICONIC

ULTIMATE

DANA 60™ AXLE,

REIMAGINED

WITH A 5- OR

6-BOLT PATTERN

Axle tubes: 3½” outside

diameter/.400” wall thickness

Heavy-duty nodular

iron diff cover

High-strength 35-spline

chromoly axle shafts

11

11

Warn® 35-spline

hub locks

Heavy-duty 8 x 6.5"

wheel bolt pattern

9/16-18 thread

35-spline SAE-4340

nickel chromoly steel

axle shafts

The Ultimate Dana 60

™

Bracketless Crate Axles

Take on the most brutal terrain with Ultimate Dana

60™ Bracketless Crate Axles: the biggest, strongest

axles out there. Now available from Dana for almost

any off-road vehicle, these mighty Crate Axles are

built with genuine Spicer® components featuring

upgrades that give you a competitive

advantage on the trail.

12

12

Scan here to learn more!

DANA OFFERS CRATE AXLES
FOR INSTALLATION IN
VIRTUALLY ANY APPLICATION

ULTIMATE DANA 60™ BRACKETLESS CRATE AXLES

Differential Ratio

E-Locker 3.73

E-Locker 4.10

E-Locker 4.88

E-Locker 5.38

ARB (Air Locker) 4.88

ARB (Air Locker) 5.38

Front Rear

10064659 10055395

10064660 10055396

10064658 10055398

10064657 10055400

10146346 10144196

10146347 10144198

13

13

Heavy-duty 8 x 6.5"

wheel bolt pattern

9/16-18 thread

The Ultimate Dana 80™ Rear
Bracketless Crate Axle

The new Ultimate Dana 80™ Bracketless Crate Axles

allow for installation in virtually any application.

These axles feature the Dana-engineered Dana 80™

housing while the tubes are ultra-strong 4” tubes

with 5/8” wall thickness containing Spicer® 40-spline

nickel chromoly steel axle shafts.

14

14

Scan here to learn more!

Spicer® 11.3" (287 mm) ring

and pinion gear inside -

5.38 ratio

Genuine Spicer® parts -

Made in the

USA

ULTIMATE DANA 80™ REAR BRACKETLESS CRATE AXLE

Description Ratio

Rear Ultimate Dana 80

™

Bracketless ARB® Air Locker

3.73

4.10

®

4.88

5.38

Part #

10082273

10082274

10082275

10082277

15

15

Dana Builder Axle Program

With brand-new parts from Dana’s Builder Axle

Program, you can accommodate almost any

application, with options like extra-long tubes to

cut to length, options for ball joint or king pin, and

much more.

Stop wasting time scouring the junkyards.

Now you can order the Spicer® parts you need for

the Dana 60 axle from Dana through the Builder

Axle Program.

16

16

Scan here to learn more!

DANA BUILDER AXLE PROGRAM - BUILD A CUSTOM DANA 60 AXLE

Builder Axle Kit

Front Axle Housing

Rear Axle Housing

Ball Joint Knuckle Kit

Front Wheel End Kit

Rear Wheel End Kit

Front Brake Kit

Rear Brake Kit

The Ultimate Dana™ King Pin Knuckle Kit

Part #

10034535

10034596

10087102

10087094

10034732

10087277

10087278

10020665

BUILD A

CUSTOM
DANA 60

AXLE

17

18

Dana and Spicer® Performance

®

Products for the GEN6 Ford Bronco

Dana and Spicer have been an integral part of the iconic Bronco since the beginning, with every

generation of Bronco riding on robust Dana axles. In 1966, the Generation I Bronco came with a Dana

30™ front axle—and that tradition continues today as the new Bronco rolls off the line featuring Dana

axles and components. On the highway or off-road, trust Spicer aftermarket driveline components and

Dana axles to support and enhance the tough, capable, ready-for-anything Bronco.

Bronco and the Bronco logo are registered trademarks of the Ford Motor Company.

(2021+)

The Ultimate Dana 44™ AdvanTEK®
Front-Drive Unit Axle Technology

Built with Dana-designed center housing that accommodates

deeper gear ratios, this axle delivers improved strength for off-road

performance with 32-spline differential side gears and a solid axle

tube. It’s fully loaded and ready to install right out of the crate,

saving you money—and getting you out on the trail quicker.

Spicer Extreme™ Half Shafts

Gain a significant increase in strength and performance with

the material upgrades and design improvements featured

on Spicer Extreme™ half shafts. The high-quality coating

provides superior corrosion protection and a clean look,

and precision engineering makes installation a breeze.

19

5- or 6-wheel

lug patterns

Double-row tapered roller

axle bearings

Raised track bar

mounting location

Five ratio options deliver

the best setup for your

unique rig

Heavy-duty nodular

iron diff cover

Available with either an

®

ELocker® or

Eaton

ARB

®

Air Locker

®

The Ultimate Dana 60™
Semi-Float Axle

The Ultimate Dana 60™ Semi-Float Axle delivers all

the benefits—like Spicer® ring and pinion gearing,

heavy-duty brackets, and more—and all the con-

venience of adhering to a semi-floating axle design:

get a direct-fit, bolt-in solution and reuse your

wheels and brakes.

THE ULTIMATE DANA 60™
SEMI-FLOAT AXLE

Application Ratio Locker

2021 and Up Ford Bronco 3.73 Eaton E-Locker

2021 and Up Ford Bronco 4.10 Eaton E-Locker

2021 and Up Ford Bronco 4.56 Eaton E-Locker

2021 and Up Ford Bronco 4.88 Eaton E-Locker

2021 and Up Ford Bronco 5.38 Eaton E-Locker

2021 and Up Ford Bronco 4.56 ARB Air Locker

2021 and Up Ford Bronco 4.88 ARB Air Locker

2021 and Up Ford Bronco 5.38 ARB Air Locker

®

ASSEMBLY FORD BRONCO

®

Part #

SF-L60BR373E-69

SF-L60BR410E-69

SF-L60BR456E-69

SF-L60BR488E-69

SF-L60BR538E-69

SF-L60BR456A-69

SF-L60BR488A-69

SF-L60BR538A-69

20

20

Scan here to learn more!

Spicer® 1350

Strap-style/half-round

end yoke

Axle tubes: 3½” outside

diameter/.400” wall thickness

High-strength 35-spline

chromoly axle shafts

Spicer AdvanTEK® Gearing for the Ford Bronco

®

Only genuine Spicer AdvanTEK® ring and pinion gears give Bronco enthusiasts the ability

to handle even the most extreme off-road conditions. The Spicer gearing used in

today’s Dana 44™ AdvanTEK® axles have a smaller, more durable 220mm ring gear.

2021 AND NEWER FORD BRONCO

Front Axle

Dana 44™ AdvanTEK® FDU (M210 FDU)

Rear Axle

Dana 44™ AdvanTEK® (M220)

Front Axle

Dana 35™ AdvanTEK® FDU (M190 FDU)

Dana 35™ AdvanTEK® FDU (M190 FDU)

Dana 35™ AdvanTEK® FDU (M190 FDU)

Rear Axle

Dana 44™ AdvanTEK® (M220)

Dana 44™ AdvanTEK® (M220)

Dana 44™ AdvanTEK® (M220)

Dana 44™ AdvanTEK® (M220)

Front Axle

Dana 44™ AdvanTEK® FDU (M210 FDU)

™

Dana 44

AdvanTEK® FDU (M210 FDU)

Rear Axle

Dana 44™ AdvanTEK® (M220)

™

Dana 44

AdvanTEK® (M220)

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

4.70 ELD 10099471 10267427 10267428

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

4.70 ELD 10145106 10267429 10267430

Base, Big Bend™, Black Diamond™, and Outer Banks

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

3.73 Open (Laser Welded Ring Gear) 10127702 10267425 10267426

4.27 Open (Laser Welded Ring Gear) 10130627 10267425 10267426

4.46 Open (Laser Welded Ring Gear) 10130628 10267425 10267426

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

3.73 Open (Laser Welded Ring Gear) 10150417 10267429 10267430

4.27 ELD 10145085 10267429 10267430

4.46 Open (Laser Welded Ring Gear) 10150418 10267429 10267430

4.46 ELD 10145092 10267429 10267430

Badlands™, Wildtrak™, and First Edition

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

4.46 ELD 10099466 10267427 10267428

4.70 ELD 10099471 10267427 10267428

Ratio Diff Type Spicer Part # Install Kit Part # Master Kit Part #

4.46 ELD 10145092 10267429 10267430

4.70 ELD 10145106 10267429 10267430

Sasquatch

™

Differential Bearing Rebuild Kits

™

™

21

Spicer® Performance Driveshaft
for the Ford Bronco

Improved Strength and Performance

• Engineered with a smaller diameter for improved clearance to the exhaust

• High-strength, thicker tubing

• Includes a direct-fit, bolt-in flange

• Provides ease of installation and a better off-road experience

• Optimized for 0”- 6” lifts

• Delivers strength that can exceed even original equipment

®

Representative Image,

Production Part may Differ

Every Bronco model comes with standard
4WD. The Bronco has two 4WD systems available,
with the base setup using a 2-speed electronic
shift-on-the-fly transfer case. The advanced 4x4
version (4A on Drive Select dial) adds an
on-demand automatic mode for
selecting 2-Hi and 4-Hi.

22

HEAVY-DUTY UPGRADE - 1350 SERIES DRIVESHAFTS

Description

Performance Driveshaft Rear - 1350 Series 4X4 4 Door

Performance Driveshaft Rear - 1350 Series 4X4 2 Door

Performance Driveshaft Rear - 1350 Series AWD 4 Door

Performance Driveshaft Rear - 1350 Series AWD 2 Door

Performance Driveshaft UD60 Rear - 1350 Series 4X4, 4 Door

Performance Driveshaft UD60 Rear - 1350 Series 4X4, 2 Door

Performance Driveshaft UD60 Rear - 1350 Series AWD, 4 Door 2021+ Ford Bronco, AWD, 4 Door (Long Wheel Base) With Ultimate Dana 60 Rear Axle

Performance Driveshaft UD60 Rear - 1350 Series AWD, 2 Door

2021+ Ford Bronco, 4X4, 4 Door (Long Wheel Base) With Ultimate Dana 60 Rear Axle 10335059

2021+ Ford Bronco, 4X4, 2 Door (Short Wheel Base) With Ultimate Dana 60 Rear Axle 10335062

2021+ Ford Bronco, AWD, 2 Door (Short Wheel Base) With Ultimate Dana 60 Rear Axle 10335066

2021+ Ford Bronco, 4X4, 4 Door (Long Wheel Base) 10121259

2021+ Ford Bronco, 4X4, 2 Door (Short Wheel Base) 10121260

2021+ Ford Bronco, AWD, 4 Door (Long Wheel Base) 10121380

2021+ Ford Bronco, AWD, 2 Door (Short Wheel Base) 10121381

Application Part #

10335064

Spicer® Driveshafts for the Jeep®
Wrangler JK, JL, and Gladiator JT

DIRECT-FIT, BOLT-IN

Greater Strength. Less Vibration. Direct Fit.

• Features a thicker tube for added strength

• One-piece flange eliminates run-out and the need for an adapter

• Smaller diameter offers improved clearance to the exhaust

• Includes transfer case, half-round conversion yoke, and hardware

UPGRADE

®

All genuine Spicer
Spicer transfer case yoke and hardware

for easy installation.

driveshafts include a

HEAVY-DUTY UPGRADE - 1310 SERIES DRIVESHAFTS

Application

Jeep Wrangler JK (0-2” of lift)

Jeep Wrangler JK

Jeep Wrangler JL

Jeep Gladiator JT

Position Part # Length - Collapsed/Extended (Inches)

Front 10018230 34.8 / 39.4

Front 10020345 35.9 / 40.5

Front 10020345 35.9 / 40.5

Front 10020345 35.9 / 40.5

HEAVY-DUTY UPGRADE - 1350 SERIES DRIVESHAFTS - FOR USE WITH ULTIMATE DANA 60

Application

Jeep Wrangler JK

Jeep Wrangler JK

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Gladiator JT

Jeep Gladiator JT

Position Part # Length - Collapsed/Extended (Inches)

Front 10113216 31.8 / 34.9

Rear 10113217 39.9 / 43.6

Front 10097841 33.2 / 36.3

Rear 10097842 41.4 / 45.1

Front 10097841 33.2 / 36.3

Rear 10132306 60.3 / 66.6

HEAVY-DUTY UPGRADE - 1350 SERIES DRIVESHAFTS

Application

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Gladiator JT

Jeep Gladiator JT

Axle Model Position Part # Length - Collapsed/

™

Dana 35

Dana 44

Dana 44

Dana 44

Dana 44

Dana 30

™

AdvanTEK

™

AdvanTEK

™

AdvanTEK

™

AdvanTEK

™

AdvanTEK

Front 10097839 36.5 / 39.6

®

Rear 10097843 44.8 / 48.4

®

Front 10097840 35.9 / 39.0

®

Rear 10097844 43.6 / 47.2

®

Front 10097840 35.9 / 39.0

®

Rear 10132305 62.5 / 68.7

Extended (Inches)

™

Note: To ensure proper fitment, it is best
to measure your application after any axle
and lift installation.

The below information is a general guide
for selecting the proper driveshafts:

• JK driveshafts accommodate 2-4" of lift

• JT driveshafts accommodate 0-6" of lift

• JL driveshafts accommodate 0-6" of lift

23

23

Spicer

®

Two-Piece 1350 Series

Driveshaft with CV Joints
for the Jeep

Get the Lift You’re Looking For.

The new two-piece Spicer® 1350 Series Driveshaft for the Jeep
Gladiator JT is engineered as a direct bolt-in solution for increased
strength. Featuring several upgrades designed for added durability
on the trail, this driveshaft includes 3" DOM tubing. Dana gives you
everything you need for the upgrade, including a center bearing drop
bracket kit designed to accommodate lifted vehicles.

• 100% bolt-in direct fit

- All hardware included, no adapter flange or new yokes needed

- High-angle flange yoke at the axle

• Service-free means more driving and less maintenance

- Lubed-for-life SPL

- Permanently sealed high-temperature CV boots

- Dana-designed CV joint with high-performance HNBR boot

• Two-piece design

- Allows for smaller OD, yet high strength
3×0.083 DOM tubing

- Allows for best possible break-over angle

- Ensures no critical speed issues

Gladiator JT

®

®

1350 Series u-joint

BUILT FOR ULTIMATE

PERFORMANCE

CV joints allow for a smooth transfer of

power to the wheels from the transmission,

so you can take on every trail.

New Product

Award 2019

Spicer-branded spacer and bolts included.

SPICER 1350 HEAVY-DUTY REAR DRIVESHAFT FOR JEEP® GLADIATOR JT WITH ULTIMATE DANA 60™ AXLES

Application Position Part #

Jeep Gladiator JT (UD60JT)

Rear 10132306 60.3 / 66.6

Length - Collapsed/Extended

(Inches)

SPICER 1350 PERFORMANCE REAR DRIVESHAFT FOR JEEP GLADIATOR JT WITH DANA 44™ ADVANTEK® AXLES

Application Position Part #

Jeep Gladiator JT with Dana 44

24

24

™

AdvanTEK®

Rear 10132305 62.5 / 68.7

Length - Collapsed/Extended

(Inches)

Spicer® Nickel Chromoly Axle
Shafts for the Jeep
JK, JL, and the Jeep

Wrangler

®

Gladiator JT

The Metal Makes the Difference.

Hit the trail with the confidence that comes from knowing you are
backed by the global leaders in driveline products. Engineered to deliver
added strength and durability, these Spicer axle shafts are one more
example of the innovations that we bring to performance applications.

FRONT AXLE SHAFTS

Application

Jeep Wrangler JK

Jeep Wrangler JK

Jeep Wrangler JK

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Gladiator JT

REAR AXLE SHAFTS

Application

Jeep Wrangler JK

Jeep Wrangler JK

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Wrangler JL

Jeep Gladiator JT

Axle Model Differential Left Right

™

Dana 30

™

Dana 44

™

Dana 44

™

Dana 30

™

Dana 44

AdvanTEK®Open/Trac-Lok™/ARB®10044419 10044431

Dana 44

Dana 44

™

™

AdavnTEK

AdavnTEK

®

®

Open 10153885 10153886

Aftermarket Locker 10033858 10033857

E-Locker 10033859 10033860

Open 10044416 10044431

E-Locker 10044422 10044432

E-Locker 10044422 10044432

Axle Model Differential Left Right

™

Dana 44

™

Dana 44

™

Dana 35

AdvanTEK

™

Dana 44

AdvanTEK®Open/Trac-Lok™/ARB®10043059 10043059

™

Dana 44

AdvanTEK

™

Dana 44

AdvanTEK

Open/Trac-Lok™/ARB®10153887 10153887

E-Locker 10153888 10153889

®

®

®

Open 10043051 10043051

E-Locker 10043168 10043169

E-Locker 10043168 10043169

Our SAE-4340 nickel chromoly axle shafts are

engineered to exceed OE standards and meet the

exacting demands of the off-road.

AXLE SHAFT ASSEMBLY KITS FOR WRANGLER JL (INCLUDES LEFT AND RIGHT)

Application

2018 and Newer JL

2018 and Newer JL

2018 and Newer JL

2018 and Newer JL

2018 and Newer JL

2018 and Newer JL Rubicon

Dana 44™ AdvanTEK® Open Differential Front Front Axle Shaft Kit with FAD Removal 10044469

Dana 44™ AdvanTEK® Wide Track with E-Locker Front Front Axle Shaft Kit with FAD Removal 10044474

Dana 44

Dana 44™ AdvanTEK® Wide Track with E-Locker Front Front Axle Shaft Kit 10044459

Axle Model Location Kit Description Spicer Part #

™

Dana 30

™

Dana 30

™

AdvanTEK® Open Differential Front Front Axle Shaft Kit 10044458

Front Front Axle Shaft Kit with FAD Removal 10044417

Front Front Axle Shaft Kit 10045077

FAD REMOVAL KIT

Application

2018 and Newer Jeep Wrangler JL

2020 and Newer Jeep Gladiator JT

Spicer Part #

10045078

10045078

25

25

Spicer® Ring & Pinion Gearing

HEAT TREATMENT

Quiet, Durable, Easy-to-Set-Up Gearing
for the Dana 30 and Dana 44 Axles.

Get the benefits of precision-machined gearing for genuine Dana
axles, including a smoother, quieter ride and up to double the life of
non-genuine parts. Our Spicer Differential Bearing Install Kits and
Differential Bearing Master Overhaul Kits save you money, downtime,
and aggravation by offering the parts you need, when you need them.

CYCLE TESTING: COMPETITIVE GEARS (LOW LOAD)

468,400

Spicer Ring and Pinion gears

performed more than 2X better

than the closest competitor

195,720

33,720

Competitor A

COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017

CYCLE TESTING: COMPETITIVE GEARS (HIGH LOAD)

Competitor B

Competitor C

196,680

Spicer Ring

and Pinion

Part #2018747

121,080

500,000

400,000

300,000

Gears

200,000

RING GEAR CYCLES

100,000

Spicer

125,000

100,000

FACE HOBBING

SHOT PEENING

LAPPING

These are the processes

that differentiate us from the

competition. To learn what

makes a Spicer-quality part, vis-

it us on the web at SpicerParts.

com/WhatsTheDiff.

Spicer Ring and Pinion gears

performed nearly 3X better
than the closest competitor

36,200

3,640

Competitor A

COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017

Competitor C

Competitor B

41,880

Spicer Ring
and Pinion

Gears

Spicer

Part #2018747

75,000

50,000

RING GEAR CYCLES

25,000

Differential Bearing Rebuild Kits

2007-2018 JEEP® WRANGLER JK (NON-RUBICON)

Front Axle

Dana 30

Dana 30

Dana 30

Dana 30

Dana 30

Rear Axle

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

* Includes Ring Gear Bolts & Pinion Nut ** Fits 2008 & Newer Wrangler JK. 2007 Model Year Uses PN# 2017102

Ratio Spicer Part # Install Kit Part # Master Kit Part #

™

3.73 2005021-5* 2017366 2017378

™

4.10 2005027-5* 2017366 2017378

™

4.56 10026645 2017366 2017378

™

4.88 10026639 2017366 2017378

™

5.13 10026642 2017366 2017378

Ratio Spicer Part # Install Kit Part # Master Kit Part #

™

3.21 2007774 2017086 2017109**

™

3.73 2008688 2017086 2017109**

™

4.10 2007772 2017086 2017109**

™

4.56 2018737 2017086 2017109**

™

4.88 2018747 2017086 2017109**

™

5.13 2018756 2017086 2017109**

™

5.38 10027182 2017086 2017109**

Front Axle

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Rear Axle

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Dana 44

Under high-load conditions, Spicer ring and pinion
gears lasted an average of 121,080 cycles—nearly
three times as many cycles as the closest competitor.
And under low-load conditions, Spicer ring and pinion
gears performed more than twice as many cycles as
the competition!

Differential Bearing Rebuild Kits

2007-2018 JEEP® WRANGLER JK (RUBICON)

Ratio Spicer Part # Install Kit Part # Master Kit Part #

™

3.73 2013742-5* 2017088 2017106

™

4.10 2005024-5* 2017088 2017106

™

4.56 2019746 2017088 2017106

™

4.88 2019749 2017088 2017106

™

5.13 2019752 2017088 2017106

™

5.38 10010738 2017088 2017106

Ratio Spicer Part # Install Kit Part # Master Kit Part #

™

3.21 2007774 2017087 2017110**

™

3.73 2008688 2017087 2017110**

™

4.10 2007772 2017087 2017110**

™

4.56 2018737 2017087 2017110**

™

4.88 2018747 2017087 2017110**

™

5.13 2018756 2017087 2017110**

™

5.38 10027182 2017087 2017110**

26

Spicer AdvanTEK® Gearing
for the Wrangler JL and
Gladiator JT

ROCK-STEADY

PERFORMANCE

For the first time ever, every Jeep Wrangler JL and Jeep
Gladiator JT vehicle will be offered with exclusive Dana
AdvanTEK® technology, right off the line. Only Dana
delivers the technology and performance of AdvanTEK
gearing – available for the Dana 35 and Dana 44.

Trust them to provide greater power density and fuel
efficiency than similar offerings, while reducing driveline
weight with lighter, higher-strength materials and advanced
Spicer AdvanTEK technology.

2018 AND NEWER WRANGLER JL and GLADIATOR JT

Differential Bearing Rebuild Kits

Rubicon, Select Sport, Sahara or Gladiator Models

Front Axle

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Rear Axle

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Dana 44™ AdvanTEK

Front Axle

™

Dana 30

™

Dana 30

™

Dana 30

™

Dana 30

™

Dana 30

Rear Axle

Dana 35™ AdvanTEK

Dana 35™ AdvanTEK

Dana 35™ AdvanTEK

Dana 35™ AdvanTEK

Dana 35™ AdvanTEK

Ratio Spicer Part # Install Kit Part # Master Kit Part #

®

3.73 10046055 10040468 10040469

®

4.10 10048087 10040468 10040469

®

4.56 10050939 10040468 10040469

®

4.88 10051746 10040468 10040469

®

5.13 10051004 10040468 10040469

®

5.38 10050979 10040468 10040469

Ratio Spicer Part # Install Kit Part # Master Kit Part #

®

3.43 10062926 10040477 10040478

®

3.73 10062017 10040477 10040478

®

4.10 10062033 10040477 10040478

®

4.56 10067141 10040477 10040478

®

4.88 10073110 10040477 10040478

®

5.13 10067157 10040477 10040478

®

5.38 10067204 10040477 10040478

Base Sport or Sahara Models

Ratio Spicer Part # Install Kit Part # Master Kit Part #

3.45 10006253 10040312 10040313

4.10 2005027-5* 10040312 10040313

4.56 10026645 10040312 10040313

4.88 10026639 10040312 10040313

5.13 10026642 10040312 10040313

Ratio Spicer Part # Install Kit Part # Master Kit Part #

®

3.45 10060460 10040451 10040452

®

4.10 10095819 10040451 10040452

®

4.56 10067221 10040451 10040452

®

4.88 10067231 10040451 10040452

®

5.13 10067244 10040451 10040452

226mm

220mm

Built with a smaller, more durable 220mm

ring gear, Spicer® AdvanTEK® gives Jeep
enthusiasts the power to handle even the

most extreme off-road conditions.

27

FATIGUE TESTING: 1330 SERIES U-JOINTS

FATIGUE CYCLES

U-JOINT KIT TEST RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2016

TESTED. PROVEN. TRUSTED. DRIVEN.

Cross is engineered with

SAE-4340 nickel chromoly

steel for ultimate endurance

Grease fittings for easy
installation in each cap

Enlarged trunnion diameter

for added strength

Full-circle snap rings

eliminate danger of snap

ring ejection

Engineered without

bearings so it’s almost

unbreakable

Needless bearing cups
with internal O-ring for

optimum sealing

FATIGUE TESTING: 1310 SERIES U-JOINTS

+

>

®

5-213X

10 Series

®

1,000,000

Premium

Spicer Life

Series

Spicer Life Series

SPL Part #

5-1330X

1,000,000

900,000

800,000

700,000

600,000

500,000

®

400,000

300,000

200,000

100,000

®

+

>

Spicer®10 Series u-joints performed more

than 2X better than the closest competitor

Spicer Life Series

53,439 54,319

Competitor A Competitor B Competitor C

®

u-joints are in a

league of their own

87,531

106,746

Competitor D

287,806

Spicer® 10Series

Spicer

Spicer Part #

5-153X

®

10Series

1,000,000

Spicer Life

Spicer Life Series

SPL® Part #

Premium

Series

5-1310X

1,000,000

900,000

800,000

700,000

600,000

500,000

®

400,000

FATIGUE CYCLES

300,000

200,000

100,000

®

Spicer®10 Series u-joints performed more

than 2X better than the closest competitor

Spicer LifeSeries

84,307

Competitor A Competitor B Competitor D

U-JOINT KIT TEST RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2016

®

u-joints are in a

league of their own

133,282

146,801

Spicer universal joints outperform the competition! For more information, visit SpicerParts.com/WhatsTheDiff.

Spicer® Axle Shaft U-Joints & Driveshaft U-Joint

292,547

Competitor C

691,609

Spicer

10Series

Spicer

Spicer Part #

Performance Packs for the Jeep

®

Wrangler and Gladiator

The Ultimate U-Joints for Premium Performance.

No matter what conditions you face in your vehicle, Spicer Life Series® and
Spicer® 10 Series u-joints deliver.

• Performance packs provide every u-joint needed for repair on the trail

• Lubrication Options: Available in greaseable or non-greaseable options

• For more application information, please visit SpicerParts.com/Identify

• For u-joint testing data, please visit SpicerParts.com/WhatsTheDiff

SPICER LIFE SERIES® DRIVESHAFT U-JOINT PERFORMANCE PACKS

2007-11 JK w/ Aftermarket 1310 Driveshafts with CV Front Driveshaft

2007-11 JK w/ Aftermarket 1350 Driveshafts with CV Front Driveshaft

2012-18 JK w/ Aftermarket 1310 Driveshafts with CV Front Driveshaft

2012-18 JK w/ Aftermarket 1350 Driveshafts with CV Front Driveshaft

Application

Spicer Part #

SPL1014JK

SPL1029JK

SPL1028JK

SPL1030JK

28

AXLE SHAFT U-JOINTS

Premium Spicer Life Series

Premium Spicer Life Series

Genuine Spicer (1310 Greasable)

Premium Spicer Life Series

Premium Spicer Life Series® (SPL

Premium Spicer Life Series

Premium Spicer Life Series

Premium Spicer Life Series

(SPL70/1550 Non-Greaseable)

Description

®

(1350 Non-Greasable)

®

(1310 Non-Greasable)

®

(1410 Non-Greaseable)

®

70/1550 Non-Greaseable)

®

- Blue (1310 Non-Greaseable)

®

- Blue (1350 Non-Greaseable)

®

- Blue

Spicer Part #

5-7166X

5-760X

5-260X

5-1410-3X

SPL70-4X

5-760XC

5-7166XC

SPL70-1550XC

Spicer Life Series® Plus U-Joints

Cross is engineered with

SAE-4340 nickel chromoly

steel for ultimate endurance

Grease fittings for easy
installation in each cap

Enlarged trunnion diameter

for added strength

Full-circle snap rings

eliminate danger of snap

ring ejection

Engineered without

bearings so it’s almost

unbreakable

Needless bearing cups
with internal O-ring for

optimum sealing

The Ultimate U-Joints for Premium Performance.

Global manufacturers already recognize SPL® u-joints as a benchmark in quality.
We took this trusted OE product and enhanced the grease, then improved the seal,
spacer, and seal guard materials, to create u-joints with unrivaled performance and
longevity: Spicer Life Series Plus u-joints.

Enhanced with Synthetic Grease

Extended U-Joint Life

• Journal cross engineered with a
cold-formed body to ensure better
wear and overall strength

• The red Spicer Life Series ultra-premium
grease of SPL u-joints is replaced with
upgraded green synthetic grease

• Significantly improves minimum and
maximum temperature capabilities

• Increased bearing life

Enhanced Spacer Material

Bearing Cups

• Heat-treated for strength

• Precision-ground and
case-hardened for
durability

Multi-Lip Seal

• Keeps grease in and contaminants out

• Offers maximum retention in a wider
range of environments

• Enhanced seal and seal guard material

Thrust Washer

• Eliminates friction and end galling

• Eliminates metal-to-metal contact

Spicer Extreme™ U-Joints: For Off-Road Use Only

Endurance You Can Count On from the Brand You Trust.

These u-joints can take any off-roading punishment you can dish out; they’re virtually indestructible!
Featuring a SAE-4340 nickel chromoly steel cross with an enlarged trunnion diameter for added
strength, Spicer® Extreme™ u-joints allow you to crawl over every boulder and return for more.

SPICER EXTREME™ U-JOINTS

Part # Location

5-760SPX-MK

5-1480SPK-MK

5-760SPX-WJ

5-1480SPX-WJ

5-760SPX-RK
5-1480SPX-RK
5-760SPX-SRK

5-1480SPX-SRK

5-760SPX-ORK

5-1480SPX-ORK

SPX-L

SPX-LG

SPX-LGK

SPK 1310 M44 Spicer Extreme Universal Wheel Joint Master Kit
SPK 1480 M60 Spicer Extreme Universal Wheel Joint Master Kit

SPK 1310 M44 Spicer Extreme Universal Wheel Joint Kit

SPK 1480 M60 Spicer Extreme Universal Wheel Joint Kit
SPK 1310 M44 Spicer Extreme Universal Wheel Joint Repair Kit
SPK 1480 M60 Spicer Extreme Universal Wheel Joint Repair Kit

SPK 1310 M44 Spicer Extreme Universal Wheel Joint Snap Ring Kit
SPK 1480 M60 Spicer Extreme Universal Wheel Joint Snap Ring Kit

SPK 1310 M44 Spicer Extreme O-Ring Kit
SPK 1480 M60 Spicer Extreme O-Ring Kit

SPK Spicer Extreme Anti-Seize Lube

SPK Spicer Extreme Lube Gun

SPK Spicer Exterme Anti-Seize Lube and Gun Kit

29

Spicer® Performance Differential Covers

Wherever You Take Your Vehicle, We Have You Covered.

• Designed with an aggressive look to match trail-ready strength

• Built with ribbing to protect components off-road

• Ensures greater housing rigidity

• Enhances the look of your undercarriage

• Includes hardware and drain plug

High-strength nodular Iron

• Manufactured from high-strength nodular
iron for long-lasting protection

Axle-specific fitment

• Custom design based on axle/differential
(gear ratio) models for superior fit and
easy installation

Dana cover tag

• Matches and identifies Dana axle type

Gray or Primed Finish

• Durable powder-coated finish offers
protection against rust and corrosion

Raised fill plug

• Fill plug for increased fluid
capacity on high pinion angles

Magnetic drain plug

• Easily drain particles when needed

NODULAR IRON - PERFORMANCE - WRANGLER JK

Application Summary

Wrangler JK Non-Rubicon

Wrangler JK Rubicon

Wrangler JK

NODULAR IRON - PERFORMANCE - WRANGLER JL

Application Summary

Wrangler JL

Wrangler JL

Wrangler JL

Wrangler JL

NODULAR IRON - PERFORMANCE - GLADIATOR JT

Application Summary

Wrangler JT

Wrangler JT

STAMPED STEEL - GENUINE REPLACEMENT - WRANGLER JK

Application Summary

Wrangler JK Non-Rubicon

Wrangler JK Rubicon

Wrangler JK

Axle Model Position Description Gray Color Primed Only

™

Dana 30

Dana 44

Dana 44

Axle Model Position Description Gray Color Primed Only

Dana 30

™

Dana 35

™

Dana 44

™

Dana 44

Axle Model Position Description Gray Color Primed Only

™

Dana 44

™

Dana 44

Front Nodular Iron - Performance (with hardware &

™

Front Nodular Iron - Performance (with hardware) 10023536 10332157

™

Rear Nodular Iron - Performance (with hardware) 10023536 10332157

™

AdvanTEK®Rear Nodular Iron - Performance (with hardware) 10044349 10332153

AdvanTEK®Front Nodular Iron - Performance (with hardware) 10044799 10332152

AdvanTEK®Rear Nodular Iron - Performance (with hardware) 10040651 10332154

AdvanTEK®Front Nodular Iron - Performance (with hardware) 10044799 10332152

AdvanTEK®Rear Nodular Iron - Performance (with hardware) 10040651 10332154

Axle Model Position Description Spicer Part #

Front Nodular Iron - Performance (with hardware) 10040640 10332150

™

Dana 30

Dana 44

Dana 44

Front Stamped Steel Cover Kit (with hardware) 2007353

™

Front Stamped Steel Cover Kit (with hardware) 708175

™

Rear Stamped Steel Cover Kit (with hardware) 707111X

Performance Gasket)

Aftermarket finned design

• Built with ribbing to protect differential
components from road hazards

10023534 10332155

STAMPED STEEL - GENUINE REPLACEMENT - WRANGLER JL

Application Summary

Wrangler JL

Wrangler JL

Axle Model Position Description Spicer Part #

™

Dana 35

AdvanTEK®Rear Stamped Steel Cover Kit (with hardware) 10063376

™

Dana 44

AdvanTEK®Rear Stamped Steel Cover Kit (with hardware) 10071956

30

HIGH-PERFORMANCE

(both sides)

COMPRESSIBLE

FOAM MATERIAL

Victor Reinz Victor-Lock™
Differential Gaskets

Stronger, Longer-Lasting,
Reusable Differential Gaskets

Victor Reinz Victor-Lock™ gaskets, featuring FoamFlex™ with
silicone bead over an aluminum core. For your high-performance
applications, look for high-strength, reusable Victor-Lock
differential gaskets with the signature blue bead.

Dependable Seal

• Can maintain the seal despite diff cover shifting

• Elastomer bead maintains an excellent seal even in fluctuating temperatures

• No come-backs for leaky differentials

Aluminum Core

Silicone Bead

Foam Facing

(both sides)

With heat cycles and exposure to dirt and oil,
paper and cork degrade and break down. When
swapping out parts, paper and cork gaskets
can rip or tear. Victor-Lock gaskets eliminate the
possibility of degradation, delivering dependability
and long gasket life. With no RTV required, you
can minimize downtime, eliminate the mess, and
enjoy leak-free access to the axle interior.

Save Time

• Instant seal

• No RTV means no waiting before inserting into diff case

• Can service and reuse during diff maintenance on the trail or track

Superior Materials

• Foam rather than fiber on the core provides contraction and expansion capacity

• Rubber bead improves sealing capability and aids in release during disassembly

• Core of metal for unmatched strength

VICTOR-LOCK DIFFERENTIAL GASKETS

Axle Model / Description

Ford 8.8 Differential Gasket

Ford 9 Differential Gasket

Ford 9.75 Differential Gasket

Dana 35 Differential Gasket

Dana 44 Differential Gasket

Dana 60 Differential Gasket

Dana 80 Differential Gasket

GM 12 Car Differential Gasket

AAM 9.25 14 Front Differential Gasket

Chrysler 9.25 Rear Differential Gasket

Ford 10.25 10.5 Differential Gasket

Ford 7.5 Differential Gasket

Part Number

71-20048-00

71-20047-00

71-20049-00

71-20052-00

71-20053-00

71-20056-00

71-20058-00

71-20059-00

71-20063-00

71-20064-00

71-20065-00

71-20067-00

31

Intake manifolds

Valve covers

Axles

Differential covers

Oil pans

Windshields

Gearboxes

Transmission pans

Thermostat housings

Water pumps

Victor Reinz Reinzosil

®

The One-Tube Universal RTV Solution.

Victor Reinz Reinzosil® is a permanently elastic, universal RTV silicone

sealing compound with excellent resistance to fluids and extreme

temperatures. Distributed by Dana, Reinzosil is a direct replacement

for over a dozen RTV silicones, including blue, gray, red, black, oil

resistant, and high torque.

Easy to apply and fast-curing, it’s a dependably durable RTV sealant

that’s also suitable for uneven and rough surfaces.

32

REINZOSIL UNIVERSAL RTV SILICONE

Part Type

70ml Tube

200ml Aerosol Can

310ml Cartridge

Package Part #

25ct. Case 70-31414-10

10ct. Box 70-31414-20

12ct. Box 70-31414-40

RESISTANT

TO MOST COMMON

VEHICLE FLUIDS

®

Fluid Type

Regular Unleaded Fuel

Diesel Fuel

Biodiesel Fuel

Windshield Wiper Fluid

Battery Acid

Brake Fluid

Reinzosil

Resistant to Severe Swelling

Resistant to Severe Swelling

Resistant

Resistant

Resistant

Resistant

• Resistant to temperatures from -58°F to 482°F, and
briefly up to 608°F (-50°C to 250°C, briefly to 320°C)

• Excellent resistance to fluids, including mineral oils and synthetic
oils, lubricants, fuels, diesel oil, greases, water, and detergents

• No corrosion

• Fast curing

• Will not harm oxygen sensors

• Sealing gap > 0.15 mm

Victor Reinz Reinzosil® can replace a dozen or more different varieties of RTV!

33

The “Jeep” vehicle concept was born in answer to the
U.S. Army’s call for designs of an easily transportable
4x4 general-purpose vehicle during World War II.
Willys-Overland was one of the original manufacturers
selected to produce the chosen design, with Dana
(then the Spicer Manufacturing Company) providing
the driveline components for every vehicle. After the
war, Willys-Overland began selling civilian versions
of the iconic military vehicle, and Dana’s relationship
with the Jeep

It’s a relationship for the ages–forged in continuous improvement and
innovation–that is believed to be the longest continuous supply relationship
on the same vehicle in automotive history. And we’re just getting started.

brand has been going strong ever since.

®

1941

1987

WILLYS

MB

JEEP

YJ

Front:

Rear:

Front:

Rear:

Dana 25
Dana 27

Dana 30
Dana 35

™

™

Dana 25
Dana 44

Dana 30
Dana 44

™

™

Rubicon (2003+)

™

Front:

™

Rear:

Dana 44
Dana 44

™

™

JEEP

1954

™

™

CJ

JEEP

1997

TJ

Front:

Rear:

Non-Rubicon

Front:

Rear:

2007

34

JEEP

JK

Non-Rubicon

Front:

Dana 30

Rear:

Dana 44

Rubicon (2003+)

™

Front:

™

Rear:

Dana 44
Dana 44

™

™

TODAY

Jeep, Wrangler, Gladiator, Rubicon, and the Jeep grill are registered trademarks of FCA US LLC.

JEEP

JL and

JT

Base Sport

or Sahara

Gladiator,

Rubicon, Select

Sport or Sahara

Front:

Dana 30

Rear:

Dana 35™ AdvanTEK
Dana 44™ AdvanTEK

Front:

Dana 44™ AdvanTEK

Rear:

Dana 44™ AdvanTEK

™

®

®

®

®

Dana and Spicer have been an integral part
of the iconic Bronco
every generation of Bronco riding on robust
Dana axles. In 1966, the Generation I Bronco
came with a Dana 30™ front axle—and that
tradition continues today as the new Bronco
rolls off the line featuring Dana axles
and components.

®

since the beginning, with

OVER 50

YEARS OF

BRONCO

On the highway or off-road, trust Spicer
aftermarket driveline components and Dana
axles to support and enhance the tough,
capable, ready-for-anything Bronco.

®

1966-1970

1978-1979

GENERATION I

Front: Dana 30

GENERATION II

Front: Dana 44

™

™

AND DANA

1971-1977

GENERATION I

Front:Dana 44

™

GENERATION III

1980-1986

GENERATION IV

1987-1991

Front: Dana 44™ TTB*

1992-1996

Front: Dana 35™ AdvanTEK® FDU**

TODAY

Rear: Dana 44

Bronco and the Bronco grill are registered trademarks of the Ford Motor Company. * Twin-Traction Beam (TTB) is an independent suspension system for front drive axles in four-wheel drive Ford F-Series trucks and sport utility vehicles.
** Front-Drive Unit (FDU) is an independent suspension system for front drive axles in four-wheel drive Ford sport utility vehicles.

Dana 44

™

AdvanTEK® FDU**

™

AdvanTEK

®

Front: Dana 44™ TTB*

GENERATION V

Front: Dana 44™ TTB*

35

Dana Aftermarket Group

PO Box 1000 Maumee, Ohio 43537
Customer Service: 1.800.621.8084
[e-mail]
Product Information: SpicerParts.com
Buy Direct from Dana: DanaProParts.com
E-catalog and parts locator: DanaAftermarket.com

Follow Dana Aftermarket

© 2024 Dana Limited. All rights reserved. Dana, the Dana logo, the Ultimate Dana logo, the Ultimate Dana 44, the Dana 44 AdvanTEK logo, AdvanTEK, Spicer, Spicer Inside, Spicer Life Series, SPL, Live the Spicer Life, Trac-Lok, Victor Reinz, Reinzosil, Victor-Lock, and
FoamFlex are trademarks of Dana Limited. WARN is a trademark of Warn Industries, Inc. Jeep, the Jeep grill, Wrangler, Sahara, Rubicon, JK, JL, Gladiator, and Chrysler are trademarks of FCA US LLC. Eaton and ELocker are trademarks of Eaton Corporation. ARB and Air
Locker are trademarks of ARB Corporation LTD. Ford, Bronco, the Bronco grill, Big Bend, Black Diamond, Outer Banks, and Badlands are trademarks of Ford Motor Company. GM is a trademark of General Motors LLC. AAM is a trademark of American Axle & Manufacturing, Inc.

Form # DAG-PRODBRO-1024

36