WowWee Group 9001A Users Manual
USER’S MANUAL
Ages 8+
Item No. 9001
CAUTION - ELECTRIC TOY:
NOT RECOMMENDED FOR CHILDREN UNDER
4 YEARS OF AGE. AS WITH ALL ELECTRIC
PRODUCTS. PRECAUTIONS SHOULD BE
OBSERVED DURING HANDLING AND USE TO
PREVENT ELECTRIC SHOCK.
INPUT: AC100-240V, 50/ 60 HZ
OUTPUT: DC6V 3.5A
Introduction
The Chimpanzee, our closest animal relative, is brought to life in this state-of-the-art
animatronic head. He is highly communicative, fully interactive and has four distinct
moods. He’s so real, it’s unreal!
Be sure to read this manual carefully for a complete understanding of the many
features of this Chimpanzee.
This package contains: 1 x Chimpanzee
1 x Controller (with detachable antenna)
(optional) 1 x AC/DC Adapter
Controller
Chimpanzee
2
Table of Contents
Battery Information ........................................ p.4-5
Controller Overview ....................................... p.6-7
Chimpanzee Overview ................................... p.8
Alive Mode ...................................................... p.9
Moods ............................................................. p.9
Touch Sensors ............................................... p.10
Infrared Vision Systems ................................ p.11
Stereo Hearing ............................................... p.12
Direct Control ................................................. p.13
Joysticks and Toggles Left....................... p.14
Right..................... p.15
Program Mode ................................................ p.16
Guard Mode .................................................... p.17
Demo Mode ..................................................... p.17
Sleep Mode ..................................................... p.17
3
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
1.5V
"D"
LR20
UM1
Battery Information
Battery Requirements
Chimpanzee Body
Your Chimpanzee is powered by
4 x 1.5V “D” size batteries (not included).
Recommended to use alkaline batteries.
Alternatively, the Chimpanzee can
be powered by a DC Output 6V , 3.5
amperes, center positive adapter
(if included).
Bottom View of
the Chimpanzee
Controller
Your Chimpanzee’s Controller is powered by
1 x 9V battery (not included).
FCC Note:
The unique antenna provided has been authorised
for use with this equipment. Installation of any other
antenna is not authorised under FCC regulations.
The manufacturer is not responsible for any radio or
TV interference caused by unauthorised modification
of the product.
Back view of the
Remote Controller
Body Batteries
The Chimpanzee does not issue a warning about weak batteries. You may notice that his
movements become slower when his batteries need changing.
Controller Battery
If the Chimpanzee is not responding well to controller commands, you may need to
replace the controller battery.
4
Battery Information
DC IN 6.0V
CENTER POSITIVE
Battery Installation: Chimpanzee and Remote Controller
1. Before installing or changing batteries, ensure the equipments ON / OFF buttons
are in the OFF position.
2. Remove the battery compartment covers using a Phillips or Crosshead screwdriver
(not included).
3. Insert the batteries ( not included) into the Chimpanzee and the Controller as shown
in the diagrams.
4. Replace the battery compartment covers and screws.
Attention: important battery information
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (Standard (Carbon zinc),
alkaline, or rechargeable), or rechargeable batteries of different capacities.
• Remove rechargeable batteries from the toy before recharging them.
• Rechargeable batteries are only to be charged under adult supervision.
• Please respect the correct polarity, (+) and (-).
• Do not try to charge non-rechargeable batteries.
• Do not throw batteries into the fire.
• Replace all batteries of the same type/brand at the same time.
• The supply terminals are not to be short circuited.
• Remove exhausted batteries from the toy.
• Batteries should be replaced by adults because of small parts.
• Remove batteries if the toy is not going to be played with for some time.
• Retain packaging as it contains important information.
AC/DC ADAPTER (If included)
The Chimpanzee can be powered by an Output 6V DC, 3.5
Amperes, center positive adapter. Use the adapter included in
this pack, otherwise purchase one of the required power voltage.
To operate the Chimpanzee with an adapter, simply turn the
power switch OFF, insert the jack into the DC socket in the
back of the Chimpanzee’s head and plug the adapter into the
mains socket. Now turn the Chimpanzee’s power switch to the
ON position.
Attach the adapter to the rear of
the Chimpanzee as shown in the
diagram.
Adapter
Important Safety Notice:
Examine the AC/DC adapter regularly for
damage to the cord, plug, enclosure and other
parts.
The AC/DC adapter is not a toy.
DC IN 6.0V
CENTER POSITIVE
5
Back view of
the Chimpanzee
POWER SWITCH
ON OFF
Program Mode
Guard Mode
Demo
Sound
Buttons
Left Toggle
Switch
Right Toggle
Switch
Animation
Buttons
On/Off switch
Alive Mode
Antenna
Controller Overview
Front view of the
Remote Controller
Left Side view
toggle 3
toggle 4
Left Joystick
Program
ON
Alive
a
x
y
b
c
z
OFF
Right Side view
Right Joystick
Chimpanzee Controller Overview
(For details refer to Direct Control p.13)
To turn on the controller use the ON / OFF switch.
Program Button
This button allows the Chimpanzee to be programmed.
(See Program Mode p.16).
Alive Button
Put the Chimpanzee into Alive Mode (see p.9).
Demo Button
Push this button and the Chimpanzee will perform a random sequence of animations.
toggle 1
toggle 2
6
Loading...