WowWee Group 0805B, 0805A, 0805C User Manual

Customer Service Website: www.wowweezone.com

We recommend that you retain our address for future reference.

Product and colors may vary.

Packaging printed in China.

WARNING! This product is not suitable for children under 3 years because of small parts - choking hazard.

Apple, the Apple logo, iPhone, iPad, iPad mini, iPad Air, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Android and Google Play are trademarks of Google Inc.

Amazon and Amazon Appstore are trademarks of Amazon.com, Inc.

MADE IN CHINA

1. INTRODUCTION

USER MANUAL

Item No.: 0805

Age: 8+

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or experienced radio/TV technician for help

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

For these purposes, the party responsible is:

WowWee USA Inc. 7855 Fay Avenue, Suite 310 La Jolla CA, USA 92037

1-800-310-3033

For more indepth instructions, please refer to www.wowwee.com/chip For warranty information, please visit http://wowwee.com/information/warranty

WARNING! This equipment may experience difficulty and/or memory loss

when subjected to any electrostatic discharge, radio frequency interference, or sudden power surge/interruption. The user is encouraged to reset the equipment should any of these occur.

Product Contents:

CHiP™ x 1 CHiP SmartBand™x 1 CHiP SmartBall™ x 1 CHiP SmartBed™ x 1 Micro USB Cable x 1 AC Adaptor x 1 Wheel Guards x 4 Screws (for Wheel Guards) x 8 Quick Start Guide x 1 User Manual x 1

CHiP SmartBall™

CHiP SmartBed™ AC Adaptor8 x Screws

CHiP™

4 x Wheel Guards

CHiP SmartBand™

Micro USB Cable

WowWee Group Limited

Energy Plaza, 301A-C 92 Granville Road T.S.T. East, Hong Kong

0805US01FLA_MIM

WowWee Canada Inc.

3700 Saint Patrick Street Suite 206 Montreal, QC, H4E 1A2, Canada

Please note the following when operating CHiP™:

• Do not immerse CHiP™ or any of its parts or accessories in water or any other form of liquid.

• Do not drop, throw, or kick CHiP™ or its accessories as this may damage mechanical functions.

• Do not leave CHiP™ unattended near edges from which it could fall.

2. BATTERY INFORMATION

Installing or changing batteries in the CHiP SmartBall™:

1. Lay the CHiP SmartBall™ so that the battery compartment faces upwards. The CHiP SmartBall™ requires 4 x “AAA” size alkaline batteries (not included).

2. Using a Phillips screwdriver (not included) remove the

4 x “AAA” Size Alkaline Batteries (not included)

CHiP SmartBall™

Battery Diagram/Installation

screws on the battery compartment cover located on the back of the ball.

3. Remove any existing batteries and insert new batteries according to the diagram. Ensure that the positive and negative polarities match the illustrations inside the battery compartment.

4. Replace the battery compartment cover and tighten screws using the screwdriver. Do not over-tighten.

LOW BATTERY INDICATORS:

CHiP™ - When the batteries grow weak, CHiP™ will move very slowly and

Rechargeable Battery (included)

Note: Do not remove/replace CHiP™

Rechargeable Battery without first contacting

support (www.wowweezone.com)

WowWee

CHiP™ Battery Diagram

IMPORTANT BATTERY INFORMATION (CHiP Smartball™):

• Use only fresh batteries of the required size and recommended type.

• Do not mix old and new batteries, different types of batteries [standard (Carbon-Zinc), Alkaline or rechargeable] or rechargeable batteries of different capacities.

• Remove rechargeable batteries from the toy before recharging them.

• Rechargeable batteries are only to be charged under adult supervision.

• Please respect the correct polarity, (+) and (-).

• Do not try to recharge non-rechargeable batteries.

• Do not dispose of batteries into fire.

• Replace all batteries of the same type/brand at the same time.

• The supply terminals are not to be short-circuited.

• Remove exhausted batteries from the toy.

• Batteries should be replaced by adults.

• Batteries should be recycled or disposed of as per state and local guidelines.

CHiP SmartBand™ - When the battery grow weak, CHiP SmartBand™ will flash red

CHiP SmartBall™ - When the batteries grow weak, the light on CHiP SmartBall™ will

will make a low battery indication sound. You can also see current battery levels via the CHiP™ App. When this happens, recharge CHiP™ as indicated in the Rechargeable Battery Instruction Sheet.

and then power down. When this happens, recharge CHiP SmartBand™ as indicated in the Rechargeable Battery Instruction Sheet.

flash red and then power down. When this happens, power OFF and replace all batteries.

3. APP COMPATIBILITY

Apple® iOS devices:

Works with iPhone

*Devices must also support Bluetooth® Smart (also known as Bluetooth® Low Energy).

Android™ devices:

Works with most Bluetooth Android™ 4.4.4 (KitKat) or later*.

* The easiest way to test compatibility before purchasing the product is to attempt to download and run the CHiP™

App. If your device is not compatible, Google Play™ will not allow you to see, download, or install the app.

, iPad® & iPod touch® devices running iOS 9 or later*.

Smart Ready (also known as Bluetooth® Low Energy) devices running

4. DOWNLOADING THE APP

For Apple

Go to the App Store WowWee "CHiP" App. Then, click download.

For Android™ Devices:

Go to the Google Play™ Store or Amazon Appstore™ and search for the CHiP™ App. Then, click download.

Devices:

and search for the

Q & A

Q: Is my tablet or phone compatible with CHiP™? A: CHiP™ can be controlled using our free apps

available for compatible smart devices featuring

Smart technology. These apps are

Bluetooth available on iTunes

iOS devices: All iPhone

which run iOS 9 or later are compatible.

Android™ devices: The app is compatible with most Bluetooth

Ready (also known as Bluetooth running Android™ 4.4.4 (KitKat) or later. The easiest way to test compatibility before purchasing the product is to attempt to download the CHiP™ App. If your device is not compatible, Google Play™ will not allow you to see, download, or install the app. If the app can download, install, and run correctly on your device, we expect full compatibility.

Q: I cannot access Google Play™ on my Android™

device, how can I download the application?

A: Try downloading the application on the Amazon

AppStore™. All WowWee provided there for users who cannot use Google Play™.

Q: When I try to download the CHiP™ app on my

Android™ phone, it says it's incompatible with my device.

A: CHiP™ only works with devices which are Bluetooth

Smart Ready and running compatible operating systems.

Generally our toys are expected to be compatible with

most Android™ phones or tablets that are Bluetooth Smart Ready (also known as Bluetooth and running Android™ 4.4.4 (KitKat) or later.

The easiest way to test CHiP™ app compatibility on

your Android™ device is to attempt to download the CHiP™ App. If your device is not compatible, Google Play™ will not allow you to see, download, or install the app. If the app can download, install, and run correctly on your device, we expect full compatibility.

Q: My CHiP™ won’t show up in the app when I try

to connect.

A: Make sure your CHiP™ is fully charged and is turned

on, then close the app and switch Bluetooth

or the Google Play™ store.

, iPod® and iPad® devices (excluding iPad® 2)

Low Energy) devices

applications are officially

Smart

Low Energy)

on/off in

5. CONNECTING TO CHIP™ WITH YOUR DEVICE

To connect CHiP™ with your device:

1. Turn CHiP™ and its accessories ON as instructed in the

Quick Start Guide.

2. Open the CHiP™ App on your device.

3. Follow the on-screen instructions.

your device settings. If you're still having problems, try restarting your device completely.

Q: My CHiP™ disconnects often and/or seems to

pause or run slow.

A: This is most likely caused by Bluetooth

Ensure that there are no other Bluetooth connected or switched on (especially audio devices), as these can cause interference which can cause issues. If your still having problems try turning your device's WiFi off to reduce interference.

Q: My CHiP™ turns on, plays a sound, then switches off

and/or CHiP™ turns off unexpectedly during play.

A: Most likely the batteries are low or flat; try placing

CHiP™ on it CHiP SmartBand™ and/or use the CHiP SmartBand™'s AC/DC adaptor to directly charge CHiP™. While charging, ensure that the charging lights on CHiP™ are on.

Q: Can I use CHiP™ without a compatible smart device? A: Yes. CHiP™ is designed to be used without a smart

device for normal play. For special functions or receving rewards, a compatible smart device is required.

Q: Can I connect additional accessories to CHiP™? A: Currently, CHiP™ can only support one additional

CHiP SmartBand™. Future updates may support additional accessories.

Q: How do I pair another CHiP SmartBand™ to CHiP™

or replace a lost accessory?

A: Refer to the app or website.

Q: CHiP™ does not automatically go to CHiP SmartBed™

to recharge when batteries are low.

A: Ensure that CHiP™ has a clear line of sight to the

SmartBand. CHiP™ cannot navigate between rooms.

Q: Does CHiP™ work outside or in bright sunlight? A: CHiP™ is designed to work only indoors. Bright

sunlight or Ultra-Violet light can interfere temporarily with CHiP™'s functions.

For a more in-depth FAQ, please refer to

www.wowwee.com/chip

interference.

devices

+ 4 hidden pages

WowWee Group 0805B, 0805A, 0805C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

0805US01FLA_MIM