WOW!dea SKOIN M3 SPEAKER LAMP
User's Manual
- GENERAL INTRODUCTION -
Designed from users’ perspective, WOW!dea SKOIN M3 Speaker Lamp is intended to
meet a variety of daily needs, including night lamp, reading, eye protection, audio,
alarm clock, dual USB charger, and high-capacity power bank. Apart from user
friendliness, it is also a work of art featuring trendy colors and an anodized aluminum
body that fits modern lifestyle perfectly.
- SPECIFICATIONS -
Product Name: SKOIN Speaker Lamp
Product Model No.: SKOIN M3
Executive Standard: FCC(ANSI C63.10:2013), CE-RTTE
(EN301489/EN300328/EN60950/EN62479), ROHS 2.0, GB8898-2011, GB17625.1-2012,
GB13837-2012
Materials: aluminum alloy, ABS/PC/PMMA, PCBA, Li-ion Battery
Dimensions: W×H×D=190×71×71(mm)
Weight: 570g;
Rated Input: 5V 2A, Micro USB
Rated Capacity: 10W
Battery: Li-ion Battery, 10000mAh, 3.7V, 37Wh
USB Output: 1 USB Output, 5V 2.1A (Max); Dual USB Output, 5V 1A (Max) per Port
Bluetooth: Ver. 2.1+EDR
Connection Name: SKOIN M3
Speaker Rated Power: 5W
Frequency Range: 120Hz-16KHz
Memory Card Type: TF/Micro SD
File Formats: WAV, WMA, MP3
Operation tips: Digital Display, Voice Guide
LED Qty.: 8
Color Temperature: 3800K
Use Environment: -10℃~+40℃
- COMPONENTS -
1. Touch Control Switch for the lamp.
2. Lamp
3. Body (Anodic Aluminum Oxide)
4. Digital Display for Clock, Tips and Battery Status
HI stands for power is turned on
BLUE stands for under Bluetooth Speaker Mode.
LOD stands for the progress is loading.
-RL- stands for the Alarm is on.
White LED stands for the battery is fully charged.
Red LED stands for the battery is low, needs to be recharged.
Green LED stands for the battery is charging.
5. Microphone
6. Bluetooth Speaker
7. Function Keys
8. Rich I/O ports
① USB output ports (power only)
② Micro USB input port (Power only)
③AUX inputjack, reset/upgrading key inside
④ Memory card reader
9. Power Switch
Accessories
Included USB to Micro USB cable
Optional for 5V/2A output adapter
Optional for 3.5mm to 3.5 mm AUX cable
Optional for TF(Micro SD) card
- OPERATION GUIDE -
Section A: Power On/Off
Power Switch is in the bottom. the digital display shows “HI”and the speaker plays the
voice guide when power is turned on. Turn the power off, the digital display goes off
at the same time.
Notes:
When Auto Delay Off Mode is activated, the digital display, Bluetooth speaker goes off,
the power on/off switch in the bottom will not work in this mode, please press “+”
or“–”key to reactive
active it. (Please refer to Section D: Auto Delay Off &Reactive
Activationfor further information).
Section B: Lamp Control
The lamp was set to 3 different brightness, touch the top to light up and to adjust the
brightness.
1. Night lamp (minimum brightness), suitable for bedtime, Auto Delay Off mode will
be activated in this brightness mode, the lamp, speaker and the digital display will be
automatically power off in 60 minutes.
(Please refer to Section D: Auto Delay Off &Reactive
Activationfor further information).
2. Eye protection lamp (medium brightness), suitable for cell phone browsing or
TV/computer screen watching in a dark environment.
3. Reading lamp (maximum brightness), suitable for reading.
Section C: Bluetooth Speaker & Music Player
1. Bluetooth Speaker
a) Connection
Bluetooth Speaker will automatically go into pair mode when the power is turned on,
the voice guide will remind “The Bluetooth device is ready to pair”. Find and choose
the “SKOIN M3”on your smart devices with Bluetooth functions, when the pairing is
done, you will hear “The Bluetooth device is connected successfully.”.
b) Keys Operation
Make sure your smart device is connected to SKOIN M3.
Short press “-”/“+” key for previous/next;
Press and hold down“-”/“+” keyfor volume down/up;
Short press“►” key for Pause/Play, or answer an incoming call.
Press and hold down “►” key for Force Pairing, this will disconnect the device which is
connected to SKOIN M3, so that you will be able to connect SKOIN M3 with other
Bluetooth devices.
Short press “►” Key twice when playing, make a call with the last phone number.
Short press “►” Key twice when there is an incoming call, to reject the call.
Short press “►” Key when no device is connected, to restore last connection.
2. Music Play Mode (via memory card)
a) Preparing memory card and music files
Duplicate music files in WAV, MP3 or WWA format to TF (Micro SD) memory card, plug
the card into SKOIN M3 which power is on, you will hear “Music Play Mode”, otherwise
press the “M” keyto turn to the music play mode.
b) Keys Operation
Short press “-”/“+” key for previous/next;
Press and hold down“-”/“+” key for volume down/up;
Short press“►” key for Pause/Play, or answer the incoming call.
3. AUX input mode
a) Preparing and connection
SKOIN M3 will automatically turn to AUX input mode when you plugged a device into
the AUX input jack, and you will hear the voice guide “AUX INPUT MODE”. Connect
audio player such like MP3 player, CD player and play, SKOIN M3 will be used as a
speaker.
b) Key Operation
Press “-”/“+” key for volume down/up;
Short press“►” key for mute/unmute.
Section D: Auto Delay Off &ReactiveActivation
When the Lamp is set to Night Lamp (Minimum Brightness), which is suitable for
bedtime, Auto Delay Off mode will be activated, the lamp, speaker, digital display will
be automatically power off in 60 minutes.
Press the top touch control panel to light up the lamp in this mode.
The power on/off switch in the bottom will not work in this mode, please press the “+”
or“–”key to deactivate the Auto Delay Off mode, and all the functions returned to
normal.
The Alarm and Power Bank functions will always work even in Auto Delay Off mode.
Section E: Recharge & Power Bank
Whenthe voiceguideis reminding “Battery is low, please recharge in time.”and the
battery status led is in red,please recharge the device with USB adapter with DC 5V 2A
output, the led will be in green when charging, led in white for fullycharged.
SKOIN M3 also can be used as a power bank to charge your mobile devices such like
smart phones and tablets.
Dual USB ports in the back for outputs, the maximum output is 5V 2.1A when 1 USB
port is used, and 5V 1A per port when 2 USB ports are both used.
Section F: Clock & Alarm
Turn to the clock mode by press the “M” key, you will hear “Clock Mode”. The clock
and alarm settings will be done in this mode.
a) Clock Setting
1. Short press“►” key to setup the clock, the hours’ numbers on the display is
twinkling, press the “►” key again to turn to the minutes’ number. Press “M” key or
keep no operation in 2 seconds, the setting will be auto-saved and quit.
2. Short press or hold“+”,“-” key to adjust the numbers of hours and minutes when
they are twinkling.
b) Alarm Setting/Cancel
1. Press and hold down“►” key to setup the alarm, the hours’ numbers on the
display is twinkling, press the“►” key again to turn to the minutes’ numbers. Press
“M” key keep no operation in 2 seconds, the setting will be auto-saved and quit.
2. Short press or hold“+”,“-” key to adjust the numbers of hours and minutes when
they are twinkling.
3. To cancel the alarm, set the hours and minutesnumbersto “00:00”, the alarm will be
cancelled.
Section G: Voice Guide Language, Reset & Upgrading
SKOIN M3 can be reset, upgradedand changedto different languages for voice
guidewith memory card (TF/Micro SD card)by specified upgrade packages and
operations.
a) Preparing
1. A computer connected to the internet which to download the latest or specified
upgrade packages;
2. A TF (Micro SD) card;
3. A thin, hard stick tool such like a toothpick or a needle.
b) Operation
1. Download the latest upgrade package to TF card, unzip and store the file under
the root directory of the card.
2. Install the card into SKOIN M3 and power on, press “M” key to turn to Music Play
Mode.
3. SKOIN M3 will be automatically upgraded in several seconds, and it will keep
beeping when the upgradation is finished.
4. Plug the stick tool into the AUX input jack and press the key inside until the beeps
stop.
5. The upgradation is finished.
Please visit our support website at http://en.wowidea.net/skoin-m3/
for further
information and to download the upgrade packages.
- CAUTIONS–
Your device is a product of superior design and craftsmanship and should be treated
with care. the suggestion below will help you protect your warranty coverage.
1. Please use DC 5V / 2AUSB adapters to Charge.
2. Do not store the device in hot areas. high temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
3. Do not store the device in cold areas. when the device returns to its normal
temperature, moisture can form inside the device and damage electronic circuit
boards.
4.Do not attempt to open the device other than as instructed in this guide.
5.Do not drop, knock, or shake the device. rough handling can break internal circuit
boards and fine mechanics.
6.Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the
device.
7.Do not paint the device. paint can clog the moving parts and prevent proper
operation.
8.Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and
light sensor lenses).
9.Use only the supplied or an approved replacement antenna. unauthorized antennas,
modifications, or attachments could damage the device and may violate regulations
governing radio devices.
10.Use chargers indoors.
Notes:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna. -- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction. This device and its
antenna(s) must not be co-located or operation in conjunction with any other antenna
or transmitter.
Loading...