WOSON DRINK10 Operation Manual
WOSON Medical System
Technical
Publications
ASS0010
REV-A
DRINK10 Water Distiller
Operation Manual
Operation Documentation
Copyright © 2011 By Ningbo Woson Medical Instrument Co., Ltd..
Ningbo Woson Medical Instrument Co., Ltd
Address: No.19, Lane 346, Changxing Road, Jiangbei
District, Ningbo 315032, China
Tel: 86-574-83022668
Fax:86-574-87639376
Website:http://www.woson.com.cn
E-mail: overseas@woson.com.cn
DRINK10 Distiller Operation Manual
REV-A Page 1 of 26
Regulatory Requirement
This product complies with regulatory requirements of the following European
Directive 93/42/EEC concerning medical devices.
Revision History
Rev
Issue Date
Reason For Change
Rev-A
2011.01.28
First Issue
Please verify that you are using the latest revision of this document. Information pertaining to
this document is maintained on manufactory. If you need to know the latest revision, please
contact your distributor, sales representative, or our service dept.
Regulatory Requirements
Conformance Standards
The content of this instruction is fit for water distiller.
Above water distiller in accordance with the requirements of 93/42/EEC
EN 61010-1:2001
Certifications
Manufacturer is ISO 9001 and ISO 13485 certified.
DRINK10 Distiller Operation Manual
REV-A Page 2 of 26
Content
Regulatory Requirement ........................................................................................................................... 1
Revision History ....................................................................................................................................... 1
Regulatory Requirements ......................................................................................................................... 1
Content ..................................................................................................................................................... 2
Chapter 1 Introduction ............................................................................................................................. 3
1.1 Attention .............................................................................................................................. 3
1.2 Application Range ............................................................................................................... 3
1.3 Method ................................................................................................................................ 3
1.4 Contradictions ..................................................................................................................... 3
Chapter 2 Safety ....................................................................................................................................... 4
2.1 Symbol Explanation ............................................................................................................ 4
2.2 General Safety Recommendations ...................................................................................... 4
2.3 Safety Parts ......................................................................................................................... 5
2.4 Operating Risk .................................................................................................................... 5
Chapter 3 Receiving and Installation ....................................................................................................... 6
3.1 Checking the Package ......................................................................................................... 6
3.2 Open the Accessories List ................................................................................................... 6
3.3 Working Environment ......................................................................................................... 7
3.4 Installation ........................................................................................................................... 7
3.5 Power Connector ................................................................................................................. 7
Chapter 4 Product Description and Specification .................................................................................... 8
4.1 Front View ........................................................................................................................... 8
4.2 Lateral View ........................................................................................................................ 8
4.3 Open View ........................................................................................................................... 9
4.3 Size and Capacity ................................................................................................................ 9
4.5 Specification ........................................................................................................................ 9
Chapter 5 Operation Process ................................................................................................................. 10
5.1 Setting ............................................................................................................................... 10
5.2 Water-adding ..................................................................................................................... 10
5.3 Power Connector ............................................................................................................... 10
5.4 Starting .............................................................................................................................. 10
5.5 Ending ............................................................................................................................... 10
5.6 Power Off .......................................................................................................................... 11
Chapter 6 Maintenance .......................................................................................................................... 11
6.1 Maintenance Schedule Chart ............................................................................................. 11
6.2 Daily Maintenance ............................................................................................................ 11
6.3 Monthly Maintenance ....................................................................................................... 12
6.4 Quarter Maintenance ......................................................................................................... 12
Chapter 7 Troubleshooting ..................................................................................................................... 13
Chapter 8 Transport and Storage ........................................................................................................... 14
8.1 Preparing for Transport and Storage ................................................................................. 14
8.2 Transport and Storage Conditions ..................................................................................... 14
8.3 Package ............................................................................................................................. 14
Appendix 1 Electrical Connection Diagram ........................................................................................ 15
DRINK10 Distiller Operation Manual
REV-A Page 3 of 26
Chapter 1 Introduction
1.1 Attention
This manual contains necessary and sufficient information to operate the system safely,
like optimal use, a safe and reliable operation, regular and correct servicing
requirements.
Read and understand all instructions in this manual before attempting to use the product.
Keep this manual with the equipment at all times. Periodically review the procedures for
operation and safety precautions.
1.2 Application Range
The medical distiller is designed by our company, which is for the places that needs
High-purity water, such as clinic, Beauty Studio, hospital, laboratory.
Operated by adult. Considering Ergonomic, it outstands on convenient using and safety,
and continually, it can produce pure water 1L per hour in average.
1.3 Method
The pure water producing method is to transform liquid water into gaseous water by heating,
then to achieve pure water(distilled water) through cooling.
1.4 Contradictions
No Contradictions
DRINK10 Distiller Operation Manual
REV-A Page 4 of 26
Chapter 2 Safety
2.1 Symbol Explanation
Device Icon Description
“ATTENTION” – Refer to this Operation Manual” is intended to alert the
user to refer to the operation manual or other instructions when
complete information cannot be provided on the label.
“Protective Earth” - Indicates the protective earth (grounding) terminal.
Operating Tips
Note
Indicates that concerning information which easier or helpful in operation
CAUTION
Indicates that a potential hazard may exist which through inappropriate
conditions or actions will or can cause:
• Minor injury
• Property damage.
• Damage to machine
WARNING
Indicates that a specific hazard is known to exist which through inappropriate
conditions or actions may cause:
• Severe personal injury
• Substantial property damage
• Substantial damage to machine
NOTE: Indicates precautions or recommendations that should be used in the operation.
2.2 General Safety Recommendations
The user is responsible for operation and servicing the machine in accordance with the
instructions listed in this manual.
Uncover the top air outlet while using.
Keep body shell dry(especially Outlet section for avoiding short current or electric shock).
As the cover connects tightly with the body, please press the body with one hand, and pull
the cover upward with another.
For safety, please protect the cover after open it, for it can close automatically under
external pressure.
Loading...