WO SMART TECHNOLOGIES V12 User Manual

User manual

1.Description of appearance

1) Product Instructions

Main casing

side buttonCharge Piont

Touch screenLight Sensors

Watch Strap

2) Remove Strap and Charge Mode

3) Packaging List

1. Watch×1 Charger×1 Charging cable×1 User manual×1

2.Initial Use Instructions

1)Instruction about Function interface
After starting device, at time page, slip upward and downward to switch
different time display style. Slip leftward and rightward to switch different
function pages

Main page---Activity detection--Heart rate--blood oxygen ---sleep------HRV

Physical period-----Countdown------Find cellphone------Stopwatch-----Run mode

Note: Physical period reminder shows after setting the gender as “Female” in
your profile.Find phone, the countdown, and the stopwatch interface are
closed by default.
User need to restart those functions through APP settings >My device > Switch
settings

2) Software Download

A. Search “ FITUP ” in APP Store for iOS users;
B. Search “ FITUP ” through Google Play, Ying Yong Bao,Peasecod for

Android users.

3) Connecting Device
Under the interface of “APP settings > Device”, pull under the interface and
findEquipment Model. After successfully connecting the device model, “V12”
will beshown under the list of “My Device” in the APP. Also in the left top of the

devicethe sign “ ” will be present. Please reconnect if the sign “ ” is
showing.

1. Introduction of Main Functions

Attention: To ensure the data is valid, please input the right sex, height, weight
andcolor of the skin through APP personal information.

A.Power on/of

Attention: To ensure the data is valid, please input the right sex, height, weight
andcolor of the skin through APP personal information.

When device is off, push side button for 3 seconds, shows bootinglogo and

come to the time page, if no operate in 5 seconds,screen will be off and in
standby status. Push side button for 3seconds to turn off the device.

B.Multiple time display styles

At time page, slip upward and downward to switch different timedisplay style, if
no operate in 5 seconds , screen will be off and in
standby status automatically.

C.Activity detection

At time page, slip leftward and come to activity detection page, showcurrent
steps, distance and calories.

D.Sports reach standard remind

You can set a sports target value on your APP, When the number ofmoving
sports reaches the target value, the device will vibratereminder.

E.Manual Heart Rate Test and Automatic Monitoring

On heart rate detection manual page, device will detect
automatically. The device will continuously capture data and willpresent those
results constantly on the screen. After accumulatingdata for 60 seconds, the
device will enter into standby mode and thisis not dependent upon receiving
results to the test. The data testedthrough the device will not be saved.
User can find the Heart Rate icon at the bottom of the APP interface. Tapthe

icon and the device enters the manual Heart Rate Test Interface.While in
this mode, the user can use the device to test their heart ratemanually. The

data tested through the device will not be saved.
Turn on the button for the 24 hours Automatic Heart Rate Testthrough APP,
then the device will automatically capture the heart rateof the user every ten
minutes and will present captured data every 30minutes. After syncing, test
results and details will be presentedthrough the APP.

The APP Test ModesHeart Rate Data Panel

F.Blood oxygen detection

Device side measurement: Detect at device end: slip screen leftwardor

rightward, and switch to blood oxygen page, equipmentmonitoring data
real-time display blood oxygen data for 5 minutes, ifthe monitoring process
shows 0%SPO2, please check whether thewearing a posture is correct, is the
device sensor Close to the skin?

APP Manual Measurement: At the bottom of the APP's data panel, Into the

blood oxygen manual test interface, continuously monitorand display the
real-time blood oxygen value, until Click pause tostop monitoring. Monitoring
data will not be saved.

Blood oxygen monitoring in the night：Open blood oxygen night monitoring

switch in APP. The device will automatically monitor theblood oxygen data at
00:00-07:00 every day, real-time monitoring,and the data report can be
detailed in the APP data panel.In datapanel click on the blood oxygen analysis
module into the data panel,The panel will display data from 00:00 - to 07:00,
the results of theanalysis, main indicator, interventions.

(1) click icon, You can view every ten minutes of data, Continue clicking on

asingle average, You can look at each minute of data.

Analysis data panelEvery ten minutes dataEvery minute data
(2)Open the oxygen night monitoring switch, according to wear the day night
monitoring blood oxygen data, The results of the report are displayed in the
analysis results in the panel, divided into normal, mild, moderate, severe
severallevels.

(3) The analyze data panel, click on main indicators the “more”, The indicators

will
have an overall presentation, Click on the each indicators, You can view the
nouninterpretation, common symptoms and treatment methods of each
indicator.