Worx WX026.9 Instruction manual

SAFETY AND OPERATING MANUAL

ORIGINAL INSTRUCTIONS

LED Worklight WX026 WX026.9

1

2

8

3

4

7

5

6

9

A

B

C

E

D

1

2

F

C

D

E

F

G

1

2

H

1. HANDLE SLEEVE

2. HANDLE

3. ADJUSTING KNOB

4. HOOK

5. BRACKET SEAT

6. RUBBER PAD

7. BRACKET

8. FRONT COVER

9. ON / OFF SWITCH

* Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

Type WX026 WX026.9(0- designation of machinery, representative of Lamp)

WX026

Rated voltage 20V

Charger voltage 100-240V ~ 50/60Hz

Working time 2h 1.5h,2h,4h

6

Lumen 1500LM

Machine weight 1.8kg

**Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

Max**

WX026.9

ACCESSORIES

WX026 WX026.9

Battery Pack (2.0Ah WA3551.1) 1 /

Charger(0.4A WA3760) 1 /

LED Worklight EN

SAFETY POINTS FOR YOUR
FLASHLIGHT/ WORKLIGHT
SAFETY RULES FOR
CORDLESS PORTABLE
HAND-HELD LIGHT
CHARGE BATTERY BEFORE
FIRST USE

CAUTION: Read, understand

and follow all Safety Rules and
Operating Instructions in this Manual
before using this product.

SAVE THESE
INSTRUCTIONS!
READ ALL INSTRUCTIONS!
SAFETY INSTRUCTIONS

WARNING: Be sure to read and

understand all instructions in
this manual before using this portable
hand-held light. Failure to follow all
instructions may result in electric
shock, fire and/or serious personal
injury.

1. Know your cordless portable hand-

held light. Read operator’s manual

carefully.

Learn its applications and limitations,

as well as the specific potential hazards
related to this light.

2. Use only recommended battery pack

and charging stand / transformer.

Any attempt to use another battery pack

will cause damage to the portable hand­held light and could possible explode,
cause a fire, or personal injury.

Model Battery Pack

WX026

WX026.9 / /

* Models of charger and battery pack listed

above are for reference only, you can also

2.0Ah

WA3551.1

Charging Stand/

Transformer

0.4A WA3760

choose other models adapted to the work
light produced by our company. Store
personnel can assist you and offer detail
advice.

3. Remove battery pack from portable
hand-held light before replacing
bulb or performing any routine
maintenance or cleaning.

4. Let portable hand-held light cool for
several minutes after use before changing
the bulb.

5. Do not disassemble the portable hand­held light.

6. Do not place portable hand-held light or
battery pack near fire or heat. They may
explode. Also, do not dispose of a worn
out battery pack by incineration, even if it
is severely damaged or completely worn
out. The battery may explode in fire.

7. Do not operate portable hand-held
light or charging stand/transformer
near flammable liquids or in gaseous
or explosive atmospheres. Internal

sparks may ignite fumes.

8. To reduce the risk of electric shock,
do not put portable hand-held light in
water or other liquid. Do not place or

store portable hand-held light where it can
fall or be pulled into a tub or sink.

9. Do not permit children to
use portable hand-held light
unsupervised. It is not a toy. The

temperature of the bulb will become hot
after being on only a short period of time.
This hot temperature can cause burn

injury if touched.

10.DO NOT USE OR PERMIT USE OF
PORTABLE HAND-HELD LIGHT IN BED
OR SLEEPING BAGS. This portable
hand-held light lens can melt fabric
and a burn injury could result.

11.Keep light dry, clean, and free from
oil and grease. Always use a clean
cloth when cleaning. Never use brake

fluid, gasoline, petroleum-base products
or any strong solvent to clean the portable
hand-held light.

7

LED Worklight EN

SAFETY WARNINGS FOR
BATTERY PACK

a) Do not dismantle, open or shred cells

or battery pack.

b) Do not short-circuit a battery

pack. Do not store battery packs
haphazardly in a box or drawer where
they may short-circuit each other
or be short-circuited by conductive
materials. When battery pack is not

in use, keep it away from other metal
objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that
can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.

c) Do not expose battery pack to

heat or fire. Avoid storage in direct
sunlight.

d) Do not subject battery pack to

mechanical shock.

e) In the event of battery leaking, do not

allow the liquid to come into contact

8

with the skin or eyes. If contact has
been made, wash the affected area
with copious amounts of water and
seek medical advice.

f) Seek medical advice immediately

if a cell or battery pack has been

swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with

a clean dry cloth if they become

dirty.
i) Battery pack needs to be charged

before use. Always refer to this

instruction and use the correct

charging procedure.
j) Do not maintain battery pack on

charge when not in use.
k) After extended periods of storage,

it may be necessary to charge

and discharge the battery pack

several times to obtain maximum

performance.
l) Battery pack gives its best performance

when it is operated at normal room

temperature (20°C ± 5°C).
m) When disposing of battery packs,

keep battery packs of different

electrochemical systems separate
from each other.

n) Recharge only with the charger

specified by WORX. Do not use any

charger other than that specifically
provided for use with the equipment. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.

o) Do not use any battery pack which

is not designed for use with the
equipment.

p) Keep battery pack out of the reach of

children.

q) Retain the original product literature

for future reference.

r) Remove the battery from the

equipment when not in use.

s) Dispose of properly.

LED Worklight EN

SYMBOLS

To reduce the risk of injury, user
must read instruction manual

Do not expose to rain or water

Do not burn

Class III

Do not stare at the operating light
source

Li-Ion battery This product has
been marked with a symbol
relating to ‘separate collection’
for all battery packs and battery
pack. It will then be recycled or
dismantled in order to reduce
the impact on the environment.
Battery packs can be hazardous
for the environment and for
human health since they contain
hazardous substances.

9

Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.

xINR18/65-y: Cylindrical lithium
Ion battery cells with max
diameter of 18mm and max
height of 65mm; “x” represents
a number cells serial connected,
blank if 1; “-y” represents a
number of cells paralleled
connected, blank if 1.

LED Worklight EN

OPERATING INSTRUCTIONS

OPERATION

ACTION FIGURE

BEFORE OPERATION

Charging the battery Pack See Fig. A

Installing the battery pack See Fig. B

Removing the battery pack See Fig. C

OPERATION

Starting & Stopping

To start your light just depress on/off switch(1) marked “I”.
To stop your light just depress the on/off switch(1) marked “O”.

WARNING! Do not direct the light beam into your eyes.

Placing the light

WARNING! Ensure the work light is securely placed to prevent
falling object hazard.

Using the hook to hang the light

WARNING! Do not hang the work light on any electrical power cord!

See Fig. D

See Fig. E

Using the bracket to set the light

10

Add: You may use a screw to secure the work light in place.

Using the bracket to hang the light See Fig. G

Adjustable head

The work light head can be set in a variety of positions. To switch base
positions, rotate the adjusting knob to loosen the light. Adjust head to desired
position , tighten the adjusting knob.
CAUTION! Do not place hands or fingers between adjustable head and
bracket when positioning work light to avoid any hazard!

See Fig. F

See Fig. H

MAINTENANCE AND SERVICING

We recommend that you purchase your accessories listed in the above list from the same store
that sold you the tool. Refer to the accessory packaging for further details. Store personnel can
assist you and offer advice.

LED Worklight EN

DECLARATION OF
CONFORMITY

We,
Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK

Declare that the product
Description: Battery-operated lamp
Type: WX026 WX026.9(0- designation of

machinery, representative of Lamp)

Function: Lighting

Complies with the following Directives:

2011/65/EU, 2014/30/EU

Standards conform to

EN 55015
EN 61547
EN 60598-1
EN 60598-2-4
EN 62493

The person authorized to compile the technical
file,

Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 6242, Newbury, RG14 9LT,
UK

11

Suzhou 2016/04/28
Allen Ding
Deputy Chief Engineer,Testing & Certification

LED Worklight EN

LITHIUM ION BATTERY

Handle With Care. Do Not Load or

Transport Package If Damaged.

A Fire Hazard Could Exist.

For more information, call: [phone]

www.worx.com

Copyright © 2 016, Posi tec . All Rig hts Re ser ved.
AR0124 08 00