Worx WG545, WG545.2, WG545.5, WG545.1, WG545.9 User Manual

Cordless Li-Ion Blower/Sweeper
Souffleuse/Balayeuse sans fil Li-Ion
Sopladora/barredora inalámbrica con batería de iones de litio

EN

F

ES

P06
P13
P21

HELPLINE NUMBER

1-866-354-WORX (9679)

HELPLINE NUMBER

WG545 WG545.1 WG545.2 WG545.5

WG545.9 WG575 WG575.1

32

4

3

2

1

5

7

6

A1 A2

B C D

E1 E2

Cordless Li-Ion Blower/Sweeper EN

6

1. HANDLE

2. ON/OFF SWITCH

3. TUBE RELEASE BUTTON

4. BLOWER TUBE

5. BATTERY PACK

6. BATTERY PACK RELEASE BUTTONS (See Fig. B)

7. WALL MOUNT BRACKET* (See Fig. E1)

* Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

WG545 WG545.1 WG545.2 WG545.5 WG545.9 WG575 WG575.1

Voltage 20V

Max* 32V Max**
No load speed 12500/min 13800/min
Blow speed 120mph

Charging time 3hr 45min / 3hr

Charger WA3732 WA3847 / WA3740

Machine weight 3.5

lbs 2.7 lbs 4.0 lbs

* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
** Voltage measured without workload. Initial battery voltage reaches maximum of 32 volts.
Nominal voltage is 28.8 volts.

Cordless Li-Ion Blower/Sweeper EN

7

ACCESSORIES

WG545

WG545.1 WG545.2 WG545.5 WG545.9 WG575 WG575.1

Battery 1(WA3520) 1(WA3525) 1(WA3520) / WA3537

Charger 1(WA3732) 1(WA3847) / WA3740

Wall mount bracket 1 / 1 1 1 / /

Wide nozzle / 1 1 / / / 1

Dust brush / 1 1 / / / 1

Inflator nozzle / 1 1 / / / 1

Dust tube / 1 1 / / / 1

Accessory clip holder / 1 1 / / / 1

Extension hose / 1 1 / / / 1

Short tube / 1 1 / / / 1

Detail brush / 1 1 / / / 1

Deflation cover / 1 1 / / / 1

Accessory bag / 1 1 / / / 1

1: Attachment included;
/: Attachment not included

Only use the appropriate accessories intended for this tool. Accessory information can be found
on the product packaging, at a WORX dealer or on our website at www.worx.com or by calling
1-866-354-WORX(9679).

Cordless Li-Ion Blower/Sweeper EN

8

WARNING: Some dust created by

power sanding, sawing, grinding,
drilling and other construction activities
contains chemicals known to the state of
California to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:

• Leadfromlead-basedpaints;

• Crystallinesilicafrombricksandcement

and other masonry products and

• Arsenicandchromiumfromchemically-

treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemical:

• Workinawellventilatedarea,and

• Workwithapprovedsafetyequipment,

such as those dust masks that are

specially designed to filter out microscopic

particles.

WARNING IMPORTANT SAFETY
INSTRUCTIONS

When using an electrical appliance, basic
precautions should always be followed,
including the following:

READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE

INTENDED PURPOSE

WARNING: A garden blower is not a

wet suction device!
The device is designed only for blowing
of dry leaves in private households and as
a hobby device in the garden. Any other
utilization, which is not explicitly approved in
these directions, can lead to damage to the
device and represent a serious danger to the
user.
The device must not be employed in areas
where there is health endangering debris or
as a wet suction device.
The device is designed for use by adults.
Young people over 16 years may use the
device under supervision only.
The use of the device in the rain or in a
humid environment is forbidden.
The manufacturer is not liable for damage

which is caused through inappropriate use or
incorrect operation.

WARNING – To reduce the risk of
fire, electric shock, or injury:

1. Do not leave appliance when plugged in.
Unplug from outlet when not in use and
before servicing.

2. WARNING: To reduce The Risk Of

Electric Shock – Do not use on wet
surfaces. Do not expose to rain. Store
indoors.

3. Do not allow to be a toy. Close attention
is necessary when used by or near
children.

4. Use only as described in this manual.
Use only manufacture’s recommended
attachments.

5. Do not use with damaged cord or plug. If
appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, return it to a service
center.

6. Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or comers. Do not
run appliance over cord. Keep cord away
form heated surfaces.

7. Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.

8. Do not handle plug or appliance with wet
hands.

9. Do not put any object into openings. Do
not use with any opening blocked; keep
free of dust, lint, hair, and anything that
may reduce air flow.

10. Keep hair, loose clothing, fingers, and all
parts of body away form openings and
moving parts.

11. Turn off all controls before unplugging.

12. Use extra care when cleaning on stairs.

13. Do not use to pick up flammable or

combustibleliquids,suchasgasoline,or

use in areas where they may be present.

14. Always turn off this appliance before
connecting or disconnecting either hose
or motorized nozzle.

15. Use only the charger supplied by the
manufacturer to recharge.

16. Do not pick up anything that is burning or

Cordless Li-Ion Blower/Sweeper EN

9

smoking, such as cigarettes, matches, or
hot ashes.

17. Do not use without dust bag and/or filters
in place.

18. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.

19. Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.

20. When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.

21. Underabusiveconditions,liquidmaybe

ejected from the battery; avoid contact.
If contact accidentally occurs, flush with

water.Ifliquidcontactseyes,additionally
seekmedicalhelp.Liquidejectedfrom

the battery may cause irritation or burns.

SAFE OPERATION
PRACTICES FOR CORDLESS
BLOWERS/SWEEPER

1. SAFETY INSTRUCTIONS

1.1 Training

1) Read the operating and service
instruction manual carefully. Be
thoroughly familiar with the controls and

theproperuseoftheequipment.

2) Never allow children to operate the tool.

3) Keep the area of operation clear of all
persons, particularly small children, and
pets.

4) Do not use the tool for any job except
that for which it is intended.

1.2Preparation

1) Thoroughly inspect the area where the

equipmentistobeusedandremoveall

stones, sticks, wires, bones, and other
foreign objects.

2) Operate the tool only in daylight or in
good artificial light.

3) Neveroperatetheequipmentonwet

materials. Always be sure of your footing.
Keep a firm hold on the handle and walk,
never run.

1.3 Operation

1) Do not put hands or feet near or under
rotating parts.

2) Iftheequipmentshouldstarttovibrate

abnormally, stop the motor and check
immediately for the cause. Vibration is
generally a warning of trouble.

3) Stop the motor whenever you leave

theequipment,andbeforemakingany

repairs or inspections.

4) Shut the motor off and wait until the
fan comes to a complete stop before
removing the bags

5) Do not wash with a hose, avoid getting
water in motor and electrical connections.

1.4 Maintenance

1) Keep all nuts, bolts, and screws tight to

besuretheequipmentisinsafeworking

condition.

2) Checkbagfrequentlyfordeterioration

and wear, and replace worn bags. Check
that replacement bags comply with the
original manufacturer’s recommendations
or specifications.

ADDITIONAL SAFETY
INSTRUCTIONS FOR YOUR
TOOL

1. Do not charge appliance in damp or wet
locations.

2. Do not use battery-operated appliance in
rain.

3. Remove or disconnect battery before
servicing, cleaning or removing material
from the gardening appliance.

4. Do not dispose of the battery in a fire. The
cell may explode. Check with local codes
for possible special disposal instructions.

5. Do not open or mutilate the battery.
Released electrolyte is corrosive and may

Cordless Li-Ion Blower/Sweeper EN

10

cause damage to the eyes or skin. It may
be toxic if swallowed.

6. Exercise care in handling batteries
in order not to short the battery with
conducting materials such as rings,
bracelets, and keys. The battery or
conductor may overheat and cause burns.

7. Charge only using the charger provided
with the tool.

8. Do not place outlet tubes near eyes or
ears when operating.

9. Do not cross gravel paths or place the
tool on gravel while the tool is switched
on.

10. Do not place any objects into the
openings and moving parts.

11. Before removing the blow tube, always
switch off the tool, remove the battery and
allow the tool to run down.

12. Avoid dangerous environment. Do not
use appliances in damp or wet location.

13. Do not use in rain.

14. Keep children away. All visitors should be
kept at a distance from work area.

15. Dress properly. Do not wear loose
clothing or jewelry. They can be caught
in moving parts. Use of protective gloves
and substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.

16. Use right appliance. Do not use appliance
for any job except that for which it is
intended.

17. Do not force appliance. It will do the job
better and with less risk of injury at the
rate for which it was designed.

18. Do not overreach. Keep proper footing
and balance at all times.

19. Stay alert. Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.

20. Store idle appliances indoors. When
not in use, appliances should be stored
indoors in dry, and high or locked-up
place, out of reach of children.

21. Check damaged parts. Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check

for alignment of moving parts, binding
or moving parts, breakage of parts,
mounting, and any other condition that
may affect its operation. A guard or other
part that is damaged should be properly
repaired or replaced by an authorized
service center unless indicated elsewhere
in this manual.

CHARGERS

1. Use your charger only to charge the
battery in the tool which it was supplied.
Other batteries could burst, causing
personal injury and damage.

2. Never attempt to charge non-rechargeable
batteries.

3. Do not expose the charger to water.

4. Do not open the charger.

5. Do not probe the charger.

SAVE THESE
INSTRUCTIONS

1. Refertothenfrequentlyandusethento

instruct others who may use this tool. If
someone borrows this tool, make sure
they have these instructions.

2. Use only identical replacement parts.

Cordless Li-Ion Blower/Sweeper EN

11

ASSEMBLY

ASSEMBLING THE BLOWER TUBE
(See Fig. A1 & A2)

Before assembling the Blower Tube(4), be sure
the on/off switch (2) is in ‘’O’’ Off position.
Fit the Blower Tube to the motor housing as
shown in Fig A1. Check if the Blower Tube is
firmly secured.

WARNING! Do not attempt to operate

or disable the On/Off Switch by any
means other than the normal assembly or
removal of the tube.
NOTE: Before disassembling the Blower
Tube, be sure the on/off switch (2) is in ‘’O’’
Off position. Press the Release Button(3) , so
that you can separate the tube. (See Fig. A2)
Do not try to separate the tubes by force or by
using tools.

OPERATION

WARNING! The charger and battery

pack are specially designed to work
together, so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because of an electrical failure and hazard will
occur.

1. BEFORE USING YOUR CORDLESS
BLOWER

Your battery pack is UNCHARGED, you must
charge before use.
The battery charger supplied is matched to the
Li-Ion battery installed in the machine. Do not
use another battery charger.

2. CHARGING YOUR BATTERY PACK

TheLi-Ion battery is protected against deep
discharging. When the battery is empty,
the machine is switched off by means of
a protective circuit: The machine will stop
running.
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool
down before recharging.

SYMBOLS

Warning

Read the manual

Battery must be recycled or
disposed of properly.

Do not expose to rain or water

Always charge the battery
between temperatures 40°F
(4.5°C)-105°F (40.5.°C).

Do not burn

40-105ºF

12

Cordless Li-Ion Blower/Sweeper EN

12

3. TO REMOVE OR INSTALL BATTERY
PACK (See Fig. B)

Depress the battery release button (6) to
release battery pack from your tool. After
recharging, insert the battery pack into
tool’s battery port. A simple push and slight
pressure will be sufficient.

4. STARTING/STOPPING (See Fig. C)
Starting

Move the On/Off switch (2) to the “I” On
position.

Stopping

Move the On/Off switch (2) to the “O” Off
position.

WARNING! The tool runs for a few
seconds after it has been switched off.

Letthemotorcometoacompletestandstill

before setting the tool down.

5. USING THE BLOWER (See Fig. D)

The blower is intended for residential use
only. Use the blower outdoors to move
debris from hard surfaces. This blower is not
designed to clear leaves from large grassy
areas, or move wet, heavy debris.

USER TIPS

- Hold the blow tube approx 7” above the
ground when operating the tool.
Use a sweeping motion from side to side.
Advance slowly keeping the accumulated
debris/leaves in front of you.

- After blowing the debris/leaves into a pile, it
is easy to dispose of the pile.

CAUTION!

- Do not blow hard objects such as

nails, bolts, or rocks.

- Do not operate the blower near bystanders
or pets.

- Use extra care when cleaning debris from
stairs or other tight areas.

- Wear safety goggles or other suitable eye
protection, long pants, and shoes.

STORAGE

WARNING! Store the blower

indoors, in a cool dry location, out
of reach of children and animals.

1. ASSEMBLY THE WALL MOUNT
BRACKET

Attach the wall-mount bracket to the wall with
the screws provided.
Tighten all the screws securely. Carefully
check the bracket after mounting to make sure
that no movement can occur during use. (See
Fig. E1).

WARNING! Always make sure your

wall-mount bracket is securely mounted
to the wall. Failure to do so could result in
an accident, resulting in possible serious
personal injury.

2. STORING YOUR BLOWER

The blower can be stored into the wall mount
bracket (7) as illustrated (See Fig. E2).
Store in a dry place where your blower can be
protected from damage.

CLEANING THE TOOL

Clean the tool regularly.

WARNING! Keep your product dry.

Under no circumstances spray with
water.

- To clean the tool, use only mild soap and a
damp cloth.

WARNING! Do not use any type of

detergent, cleaner or solvent which
may contain chemicals that could seriously
damage the plastic.

- Self lubricating bearings are used in your

product,thereforelubricationisnotrequired.