WG160 WG160.1 WG160.2 WG160.3
WG160.4 WG160.9 WG175 WG175.1
P06
P15
P25
3 in 1: Trimmer / Edger / Mini mower
3 outils en 1: taille-haie, coupe-bordure, mini-tondeuse à gazon
3 en 1: Recortadora / Cortabordes / Minicortadora de césped
EN
F
ES
4
6
7
9 10
2
1
5
8
3
14
15
13
12
11
9 10
14
11
15
b
a
100 %
0%
For WA3578 battery
Pour Bloc-Piles WA3578
Para Batería WA3578
1
2
’
2
For WA3578 battery
Pour Bloc-Piles WA3578
Para Batería WA3578
2
1
2
’
100%
0%
A B1 B2
B3 C D
E F G
H1 H2 I
9 10
14
11
15
b
a
16
100 %
0%
For WA3578 battery
Pour Bloc-Piles WA3578
Para Batería WA3578
1
2
’
2
For WA3578 battery
Pour Bloc-Piles WA3578
Para Batería WA3578
2
1
2
’
100%
0%
A B1 B2
B3 C D
E F G
H1 H2 I
J1 J2 J3
22
18
19
20
21
17
K1 K2
L1
L2
M1
M2
M3
N1
N2
22
18
19
20
21
RIGHT
CORRECT
CORRECTO
WRONG
INCORRECT
INCORRECTO
17
K1 K2
L1
L2
M1
M2
M3
N1
N2
N3
N4
PRODUCT SAFETY
WARNING: This product may contain
lead, phthalate or other chemicals
known to the State of California to cause
cancer, birth defects and other reproductive
harm. Wash your hands after use.
Important Safety Instructions
WARNING: When using cordless
gardening appliances, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and personal injury, including the
following.
WARNING: Read all instructions
FOR ALL APPLIANCES
1) Avoid Dangerous Environment - Don’t use
appliances in damp or wet locations.
2) Don’t Use In Rain.
3) Keep Children Away - All visitors should
be kept at a distance from work area.
4) Dress Properly - Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Wear protective clothing;
use of work gloves, long pants, a long
sleeved shirt and substantial footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
5) Use Safety Glasses - Always use face or
dust mask if operation is dusty.
6) Use Right Appliance - Do not use
appliance for any job except that for which
it is intended.
7) Don’t Force Appliance - It will do the job
better and with less likelihood of a risk of
injury at the rate for which it was designed.
8) Don’t overreach - Keep proper footing and
balance at all times.
9) Stay Alert - Watch what you are doing.
Use common sense. Do not operate
appliance when you are tired.
10) Store Idle Appliances Indoors - When
not in use, appliances should be stored
indoors in dry, and high or locked-up place
- out of reach of children.
11) Maintain Appliance With Care - Keep
cutting edge sharp and clean for best
performance and to reduce the risk of
injury. Follow instructions for lubricating
and changing accessories. Keep handles
dry, clean, and free from oil and grease.
12) Check Damaged Parts - Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
for alignment of moving parts, binding
of moving parts, breakage of parts,
mounting, and any other condition that
may affect its operation. A guard or other
part that is damaged should be properly
repaired or replaced by an authorized
service center unless indicated elsewhere
in this manual.
FOR ALL BATTERY – OPERATED
GARDENING APPLIANCES
1. For all battery-operated gardening
appliances:
a) Do not charge appliance in rain, or in wet
locations.
b) Do not use battery-operated appliance in rain.
7
3 in 1: Trimmer / Edger / Mini mower
EN
Always remove or disconnect battery
pack before adjusting, cleaning,
servicing or transporting the lawn trimmer.
2. For all battery-operated products
employing a detachable or separable
battery:
a) Use only the following type and size
battery(ies): WORX model WA3525
WA3578 (for WG160 WG160.1 WG160.2
WG160.3 WG160.4), WA3537 (WG175
WG175.1)
b) Do not dispose of the battery(ies) in a
fire. The cell may explode. Check with
local codes for possible special disposal
instructions.
c) Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
d) Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
3. Avoid unintentional starting – Do not
insert the battery with your finger on
the switch. Be sure the switch is off
when inserting the battery.
ADDITIONAL SAFETY
RULES FOR LAWN
TRIMMER AND EDGE
TRIMMER
1. Keep guards in place and in working order
2. Keep hands and feet away from cutting area.
3. Do not use heavier lines than
recommended in this manual.
4. Do not use line materials of other types –
for example, metal wire, rope, and the like.
GENERAL SAFETY
WARNINGS FOR BATTERY
PACK
1) WARNING: Risk of fire and burns. Do
not disassemble, heat above 100°C
(212°F), or incinerate. Do not expose
cells or batteries to heat or fire.
Avoid storage in direct sunlight.
2) Dispose of used battery promptly.
When disposing of secondary cells
or batteries, keep cells or batteries
of different electrochemical systems
separate from each other.
3) Keep battery out of reach of children
and in original package until ready to
use.
4) Never put batteries in mouth. If
swallowed, contact your physician or
local poison control center.
5) CAUTION – The battery used in this
device may present a risk of fire or
chemical burn if mistreated. Replace
battery with (WORX) only. Use of
another battery may present a risk of
fire or explosion
6) WARNING: Do not use a visibly
damaged battery pack or appliance
as applicable.
7) WARNING: Do not modify or attempt
to repair the appliance or the battery
pack as applicable.
8) BATTERY MUST BE RECYCLED.
9) Do not short-circuit a cell or battery.
Do not store cells or batteries
haphazardly in a box or drawer where
they may short-circuit each other
or be short-circuited by conductive
materials.
10) Do not subject cells or batteries to
mechanical shock.
11) Keep cells and batteries clean and
dry. Wipe the cell or battery terminals
with a clean dry cloth if they become dirty.
12) Do not maintain secondary cells and
batteries on charge when not in use.
13) Retain the original cell and battery
literature for future reference.
14) Do not use any charger other than
that specifically provided for use
with the equipment. Secondary cells
and batteries need to be charged before
use. Always use the correct charger and
refer to the manufacturer’s instructions
or equipment manual for proper charging
instructions.
15) When possible, remove the battery from
8
3 in 1: Trimmer / Edger / Mini mower
EN
the equipment when not in use.
16) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch
on invites accidents.
17) Disconnect the battery pack from
the appliance before making any
adjustments, changing accessories, or
storing appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
18) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
19) Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
SAVE THESE INSTRUCTIONS
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Li-Ion battery, battery must be
recycled.
POSITEC Inc. has established
a partnership with the RBRC
Corporation to recycle any
Positec batteries with the
RBRC-call2recycle seal. For
environmental protection, please
do not discard batteries in the
trash. After the batteries’ life
cycle is ended, then please call
1-800-822-8837 for a free service
that will properly dispose of the
battery.
Edging
Trimming
9
3 in 1: Trimmer / Edger / Mini mower
EN
1. REAR HANDLE
2. BATTERY PACK
3. TELESCOPIC SHAFT
4. PIVOT HEAD LOCKING KNOB
5. SAFETY GUARD
6. FLOWER GUARD/EDGER GUIDE
7. AUXILIARY HANDLE
8. TELESCOPIC SHAFT ADJUSTMENT TRIGGER
9. LOCK OFF BUTTON
10. ON/OFF SWITCH
11. AUXILIARY HANDLE LOCKING LEVER
12. EDGER/TRIMMING SUPPORT WHEELS
13. LINE CUTTER
14. LOWER SHAFT COUPLING
15. UPPER SHAFT
16. MOTOR HOUSING OF TRIMMER HEAD (SEE FIG J2)
17. LINE FEED BUTTON (SEE FIG M1)
18 SPOOL CAP COVER (SEE FIG M2)
19 CAP RELEASE LATCH (SEE FIG M2)
20. SPOOL (SEE FIG M2)
21. CUTTING HEAD (SEE FIG M2)
22. EYELET (SEE FIG M2)
Not all the accessories illustrated or described are included in standard delivery.
10
3 in 1: Trimmer / Edger / Mini mower
EN
TECHNICAL DATA
WG160 WG160.1 WG160.2 WG160.3 WG160.4 WG160.9
Voltage
20V
Max*
Cutting diameter 12”(30cm)
Line diameter 0.065”(1.65mm)
Charging time 5 hrs approx. 2 hrs approx. /
Machine weight 5.7lbs 6.3 lbs 4.9lbs
WG175 WG175.1
Voltage
32V Max**
Cutting diameter
12”(30cm)
Line diameter
0.065”(1.65mm)
Charging time
3 hrs approx.
Machine weight
6.2lbs
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
** Voltage measured without workload. Initial battery voltage reaches maximum of 32 volts.
Nominal voltage is 28.8 volts.
ACCESSORIES
WG160 WG160.1 WG160.2 WG160.3 WG160.4 WG160.9
Safety guard 1
Charger 1 (WA3742) 1(WA3868) /
Battery pack 1 (WA3525) 2 (WA3525) 2(WA3578) /
Edger/trimming
support wheels
1 2 1
Spool 3 (WA0004)
WG175 WG175.1
Safety guard 1
Charger 1 (WA3740)
Battery pack 1 (WA3537) 2 (WA3537)
Edger/trimming
support wheels
1
Spool 3 (WA0004)
Only use the appropriate accessories intended for this tool. Accessory information can be found
on the product packaging, at a WORX dealer or on our website at www.worx.com.
11
3 in 1: Trimmer / Edger / Mini mower
EN
ASSEMBLY
1. ASSEMBLY OF THE SAFETY GUARD
(See Fig. A)
Remove a screw from the Guard; attach the
Safety Guard to the trimmer head. Align the
Guard so it slides into the slots located on the
trimmer head. Turn the tool over and secure
the Safety Guard onto the trimmer head with
the screw (a) provided.
2. ASSEMBLY OF THE EDGER/TRIMMING
SUPPORT WHEELS (See Fig. B1, B2, B3)
With the tool right side up, slide the Edger/
Trimming Support Wheels (12) assembly onto
the metal plate located on the side of the
Cutting Head (See Fig. B1) or underneath the
Safety Guard (5) (See Fig. B2, B3). Make sure
the grooves of the Edger/Trimming Support
Wheels assembly locks onto the metal plate,
you will hear it click into place.
To remove the wheels assembly, press the
release button (b) on the wheel and pull the
wheels outside.
OPERATION INSTRUCTIONS
WARNING! The charger and Battery
Pack are specially designed to work
together so do not attempt to use any other
devices. Never insert or allow foreign metallic
objects into your charger or Battery Pack
connections because of electrical failure and
other hazards that will occur.
1. BEFORE USING YOUR CORDLESS
GRASS TRIMMER
Your Battery Pack is UNCHARGED and it
must be fully charged once before it is used.
The battery charger supplied is matched to the
Li-Ion battery for use with this tool. Do not use
another battery charger.
2. CHARGING YOUR BATTERY PACK
(See Fig. C)
The Li-Ion battery is protected against deep
discharging. When the battery is empty, the
trimmer will switch off by means of a protective
circuit: The trimmer head will stop rotating.
NOTE: In a warm environment or after heavy
use, the Battery Pack may become too hot to
permit charging. Allow time for the battery to
cool down before recharging.
3. CHECKING THE BATTERY CONDITION
(ONLY FOR WG160.4) (See Fig. D)
4. TO REMOVE OR INSTALL BATTERY
PACK (See Fig. E)
Depress the battery release button to remove
Battery Pack (2) from your trimmer. After
recharging, insert the Battery Pack onto
trimmer’s battery bracket. A simple push and
slight pressure will be sufficient.
5. SAFETY ON/OFF SWITCH (See Fig. F)
The safety switch is locked off to prevent
accidental starting. Depress the Lock Off Button
(9) then depress the On/Off Switch (10) and
release Lock Off Button. Your trimmer is now
on. To switch off, just release the on/off switch.
WARNING! The cutting head
continues to rotate after the
trimmer has been switched off; wait until
it has completely stopped then lay down
the tool.
6. ADJUSTMENT OF THE TELESCOPIC
SHAFT (See Fig. G)
Step one foot on the Safety Guard, then
use one hand to pull up the Telescopic Shaft
Adjustment Trigger (8), adjust the length of
the Telescopic Shaft to the most comfortable
length. Release the Telescopic Shaft.
Adjustment Trigger to lock in position.
7. MAIN HANDLE ROTATION
(See Fig. H1, H2)
First, hold down the lower housing with your
foot and pull upward on the Upper Shaft (15).
Then rotate the Upper Shaft clockwise 90
degrees (See Fig. H1) and release; the Shaft
will be locked in position automatically (See
Fig. H2).
8. ADJUSTMENT OF AUXILIARY HANDLE
Pull up the Auxiliary Handle Locking Lever (11).
Hold the Locking Lever and rotate the Auxiliary
Handle to the most comfortable and balanced
position (See Fig. I).
Release the lever, your Auxiliary Handle has
been locked.
Loading...