Page 1
WA0862
Page 2
Table of contents
TABLE OF CONTENTS
Welcome
EN
p. 03
p. 04
p. 05
p. 06
p. 07
p. 08
p. 09
p. 10
Contact information
Safety first
Important safety instructions
Get familiar with
What’s in the box
How it works
Getting started
Installation
Quick reference
Trouble shooting
Technical data
Declaration of Conformity
2
Page 3
Welcome
Thank you for purchasing a Worx Find My Landroid.
We’re here to help:
Support
www.worx-europe.com/support
Landroid Owner’s Site
https://account.worxlandroid.com/login
EN
3
Page 4
Safety first
EN
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Carefully read the instructions for the safe operation of the machine.
Save all warnings and instructions for future reference.
RF exposure requirements
To satisfy RF exposure requirements, a separation distance of 200mm or more should be maintained between this device and
persons during device operation.
Operations at a closer distance are not recommended.
The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
Maintenance
1) Have your equipment serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the equipment is maintained.
2) Never service damaged battery.
Service of the battery should only be performed by the manufacturer or authorized service providers.
Symbols
Read the operator’s manual.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authorities or retailer for recycling advice.
4
Page 5
Get familiar with
WHAT’S IN THE BOX
EN
A
B
Find My Landroid module
A
3 anti-tamper screws
B
5
Page 6
Get familiar with
EN
HOW IT WORKS
Find My Landroid option tracks your Landroid in case of theft and allows Landroid to operate if there’s no Wi-Fi coverage in
your garden.
Find my Landroid uses GPS and a mobile network connection to stay connected to the internet at all times; this way, you
won’t need Wi-Fi to control your mower through the app.
Geofence area
If your Landroid is taken outside the geofence area, you will immediately get notied on your smartphone via the Landroid
app. You will be able to lock the robot and track it. Be advised that if FML is on “deep sleep” mode the notication will be delayed by a few minutes (see below). You can set the geofence area on the app. Please consider that there is a small tolerance
area (30m from the geofence): if you want to test Find My Landroid you should bring Landroid a bit further away.
Backup battery
Find my Landroid has a backup battery: in case the main battery is removed or Landroid is turned off, it will remain connected
for a week. In these cases, Find My Landroid enters “deep sleep” mode in order to save battery: it will wake up for two minutes every ten minutes trying to connect with GPS and communicate its position. After a while, in order to extend battery
life, Find My Landroid will decrease the number of messages; it will send one every 30 minutes, and then one every hour.
If you willingly remove the battery from your Landroid or simply turn it off to store it somewhere inside the geofence area (eg.
in the garage), Find My Landroid will keep working for one day. After that it will enter “storage mode” and it will stop sending
messages.
Pre-paid SIM card
Find My Landroid provides data connectivity with its multi-IMSI SIM card, which works with a multitude of telecom providers.
The included SIM card is pre-paid for three years, after which it can be renewed for a small annual fee. A mail with all details
on renewal will be sent once the expiration is near.
6
Page 7
Getting started
INSTALLATION
EN
To install the Find My
Landroid just open the app
and select
“Find My Landroid”.
then select “Install” and proceed with the step by step
instructions on the app.
Successful installation of the Find My Landroid module is displayed on the app’s home screen (Find My Landroid symbol becomes
orange). By touching the orange symbol of Find My Landroid you will access to the further steps to complete the FindMyLandroid
settings.
Anti-tamper screw
Secure the module with the supplied anti-tamper screw only after the app has conrmed it is working properly.
Please be aware that once secured, it’s not possible to remove the screw.
7
Page 8
Quick reference
Troubleshooting
®
Make sure your Find My Landroid
operate correctly. If these do not identify and correct the problem, contact your service agent.
module is securely installed and follow the actions below if your Landroid
®
does not
EN
Symptom
®
The position of Landroid
cannot be shown precisely on
the App, or its position cannot
be detected
Landroid
.
®
does not give an
alarm when it is outside the
Geo fence.
Landroid
®
still works when it
is outside the Geo fence.
Cause
The GPS signal is affected by the
weather or some interference.
You are not using the latest version
of the Landroid
The software of Landroid
®
App.
®
itself is
not the latest.
There is a small tolerance area
immediately outside the perimeter
set for Find My Landroid
The Find My Landroid
®
.
®
module is
powered off.
Geo Fence is not set, or radius of
Geo Fence is not set.
®
Landroid
is powered off.
Geo Fence is not set, or radius of
Geo Fence is not set.
Geo Fence is not enabled.
The cellular network coverage of Find
My Landroid
®
is weak.
Action
®
1. Check and make sure: Landroid
down or on its side; Landroid
some metal objects.
2. Take Landroid
®
to an open area where it can
is not upside
®
is not covered by
obtain a mobile signal.
®
Please update the Landroid
App to the latest
version.
®
Update the software of the Landroid
before
using the module.
®
Bring Landroid
(approximately 30m from the Geo fence) to verify
that Find My Landroid
Turn on Landroid
it. If it doesn't need to be recharged, Find My
Landroid
Landroid
(Landroid
outside of the tolerance area
®
is working.
®
and if necessary recharge
®
module will be recharged by the
®
PowerShare battery.
®
has an inner battery that lasts a week
after it is turn off).
®
Use the Landroid
In this case, the alarm will be sent 10mins after
the Landroid
App to set it properly.
®
is brought outside of the Geo
fence.
®
Use the Landroid
Check if you Find My Landroid
App to set it properly.
®
has a weak signal.
If yes move to an area with a good signal.
®
Landroid
the communication between
Landroid
does not work properly
works normally but
®
and smartphone
.
The Find My Landroid module is
damaged.
®
The software of Landroid
is not the
latest.
®
The Landroid
App needs to be
updated.
The SIM of the Find My Landroid
®
module is not activated.
®
The Find My Landroid
not well connected to Landroid
®
Landroid
has no power.
module is
®
.
The pre-paid SIM subscription has
expired.
Please go to https://account.worxlandroid.com/
access your profile and open a ticket using the form
®
Update the software of Landroid
®
Update your Landroid
App before using the
.
module.
Before first use, make sure you have activated the
SIM by following the procedure in the Landroid
App.
®
Reinstall the Find My Landroid
module. Check that
the module connector is correctly inserted with a
click.
®
Check if the screen of Landroid
not, send Landroid
®
back to the charging base for
is illuminated. If
charging or start emergency procedure to charge
it.
The SIM has a pre-paid 3-year subscription. Once
expired it must be renewed.
An e-mail with all details on renewal will be sent
once the expiration is near. When you'll receive it,
follow the instruction.
®
8
Page 9
Quick reference
Symptom Cause Action
The module is designed to update
Landroid® is unable to
achieve real time positioning
or the location of Landroid®
cannot be updated in realtime.
NOTE:
1. The Find My Landroid®module and the Radiolink module can only be alternatively installed.
And the anti-theft screw must be removed by the service agent.
2. The battery of Find My Landroid® module must be replaced by the service agent.
3. Make sure Landroid® is regularly charged during storage, once every half year is recommended.
4. The Find My Landroid® module needs be topped up after a pre-paid 3-year SIM subscription.
the positioning every 10 minutes,
When Landroid® has low power
battery capacity, the time interval of
positioning update will be longer.
Landroid® has been switched off for
more than 24 hours inside the Geo
fence for storage.
This is normal. No action is needed.
EN
Technical data
Band Tx (MHz) Rx (MHz)
EGPRS 900MHZ 880~915 925~960 30
EGPRS 1800MHZ 1710~1785 1805~1880 30
NB-IOT Band3 1710~1785 1805~1880 24
NB-IOT Band8 880~915 925~960 24
NB-IOT B20 832~862 791~821 24
Max (EIRP)
Transmitted Power
(dBm)
9
Page 10
Quick reference
Declaration of Conformity
We,
Positec Germany GmbH Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description 4G+GPS module
Type WA0862 (2 - designation of machinery, representative of 4G+GPS module)
Function GPS localization + cellular connectivity
Complies with the following Directives,
2014/53/EU, 2011/65/EU&(EU)2015/863
The notified body involved
Name: TIMCO ENGINEERING, Inc (notified body CE1177)
Address: 849 NW State Road 45, Newberry, Florida 32669, USA
Certification No. : TCF-437CC20
Standards conform to,
EN 301 908-1 V11.1.1, EN 301 908-13 V13.1.1, EN 301 511 V12.5.1,
EN 303 413 V1.1.1, EN 301 489-1 V2.2.3, Draft EN 301 489-52 V1.1.0,
EN 301 489-19 V2.1.1, EN 50665:2017, EN 62311:2008, EN 62368-1:2014+A11:2017
EN
2020/05/14
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
10
Loading...