
DART BLASTER OVERVIEW:
INSTRUCTION MANUAL
8+
ITEM NO. 33799
LIGHTS
GLOW IN THE DARK SPRING PUMP
TRIGGER
BATTERY COMPARTMENT
PULL BACK SLIDE
FLIP UP SIGHT

LOADING DART BLASTER
Load a single dart into the barrel as shown. To avoid damage to
dart and/or blaster, do not force dart all the way in. About 1/4
of dart should stick out of barrel.
This Blaster has optional light up effects that activate whenever
the trigger is pulled, this requires 3 x AG13/LR44 button cell
batteries.
To install batteries, carefully pry off grip plate as shown starting
at seams of blaster. Use a thin object to work in and pull off
evenly.
Note the polarity (+ and - marks on batteries) and install with all
batteries facing the same direction stacked.
BATTERY INSTALLATION (OPTIONAL)
LR44
AG13
+
LR44
AG13
+
LR44
AG13
+