world racing car NTX1.1 Instruction Manual
NTX is a new generation high quality 1/10 scale nitro onroad car.
NTX is supplied in a box equipped with Instruction Manual.
Its use is intended for more than 16 years old persons with experience on rc model car field.
Children and all the persons without this requirement MUST have direct supervision of a
knowledgeable adult responsible.
Please don't hesitate to contact WRC support at info@wrc-racing.com for any problem or
question.
Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option
parts and other information.
W.R.C. world racing car s.r.l.
Via Meucci, 23/B
36040 Brendola (VI)
ITALY
Phone: 0039 0 444 401138
fax: 0039 0 444 401139
E-mail: info@wrc-racing.com
Website: www.wrc-racing.com
CUSTOMER SUPPORT
WRC guarantees this model kit to be free from defects in both material and workmanship within 30
days of purchase.
The total monetary value under warranty will in no case exceed the cost of the original kit
purchased.
This warranty doesn't cover any compnents damaged by use or modification or as result of wear.
Part or parts missing from this kit must be reported within 30 days of purchase.
No part or parts will be sent under warranty without proof of purchase.
If you find a defective or missing part, contact the local distributor.
Customer service and support will be provided through local hobby store.
No warranties are expressed or implied that cover damage caused by what is considered normal
use or cover or imply how long any model cars' components or electric components will last before
requiring replacement.
Due to the high performance level of this model car you will need to periodically maintain and
replace consumable components; any and all warranty coverage will not cover replacement of any
part or component damaged by neglect, abuse or improper or unreasonable use.
This includes but is not limited to damage from crashing, excessive moistur, improper use or no
maintenance or user modifications which compromise the integrity of components.
Warranty will not cover compnents that are considered consumable on RC model car.
WRC doesn't pay nor refund on any component sent from WRC or its distributor for warranty.
WRC reserves the right to make final determination of the warranty status of any component or part
Use only original WRC spare part:
WARRANTY
Assemble the kit only away from the reach of children.
Follow the building and operating instructions using the utmost care.
Don't put any part of your body inside rotating and moving elements as this may cause damage or
serious injury.
Check and clean the model before putting it away.
Don't use your model car in public places or in roads and areas where it could generate conflict with
person or vehicular traffic.
The model car is controlled by radio: you MUST put great care to avoid loss of radio control always
keeping a safety margin all around your model in order to prevent any collision.
Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could
cause loss of control of the RC model.
Always turn on your transmitter before you turn on the receiver in the car and always turn off the
receiver before you turn off your transmitter.
Keep the wheels of the model off the ground when checking the operation of the radio equipment.
Disconnect the battery pack before storing your model.
GENERAL INFORMATION
Instruction Manual MUST be read and fully understood before to start building and operating
functions.
Always keep Instruction Manual in safety place, ready to be consulted for any reference you need.
Use only original WRC spare parts.
SAFETY PRECAUTIONS
INTRODUCTION
RING PLIERS
ALLEN:
1.5 MM.
2.0 MM.
2.5 MM.
3.0 MM.
SIDE CUTTER
SCISSORS
POCKET BOOSTER
STARTER
TECHNICAL INFORMATION
- BODY: PROTOTIPE MODEL (NOT INCLUDED)
- ADJUSTABLE FRONT TOE, CAMBER AND CASTER
- ADJUSTABLE REAR TOE AND CAMBER
- BUMPER /FRONT BACKSTOP
- ALUMINIUM CHASSIS
- FULL BALL BEARING
- CARBON RADIO PLATE
- TRANSMISSION: TRIPLE BELT 4WD
- FRONT DIFFERENTIAL: DIFFERENTIAL GEAR
- REAR DIFFERENTIAL: DIFFERENTIAL GEAR
- FRONT AND REAR ADJUSTABLE ANTI-ROLL BARS
- PIVOT BALL SUSPENSIONS
REQUIRED BUT NOT INCLUDED IN THE KIT
ADDITIONAL ITEMS NEEDED FOR COMPLETION
ENGINE AND MUFFLER
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
2 LOW PROFILE STEERING SERVO
TRANSMITTER
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE NTX; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND
SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
NOTICE:
RECEIVER
AA ALKALINE BATTERIES
FOR TRANSMITTER
AND RECEIVER
WHEEL - TYRES - INSERTS
LEXAN BODY
FUEL AND FUEL PUMP
2
03360
92009
M2.5 x6
03303-1
95006
03089-13
97006
Ø2x9
03089-8
METAL GEAR
03297-7
03303-4
Use some silicone oil
during assembly
03360
03303-1
95006
03089-4
97006
Ø2x9
03089-8
METAL GEAR
Use some silicone oil
during assembly
03089-14
03089-8
METAL GEAR
03089-12
92009
M2.5 x6
03297-7
90006
10_15_4
03294
REAR DIFFERENTIAL ASSEMBLY
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
SILICONE OIL 80000
BAG.1
3
03361
92009
M2.5 x6
03297-3
95006
03089-13
03297-7
03089-6
PLASTIC GEAR
97006
Ø2x9
03297-5
03361
92009
M2.5 x6
03297-2
95006
03089-13
97006
Ø2x9
03089-6
PLASTIC GEAR
03089-14
03089-9
03089-6
PLASTIC GEAR
92009
M2.5 x6
03355
27 T
92022
M2 x 5
03297-7
90006
10_15_4
03294
4
FRONT DIFFERENTIAL ASSEMBLY
Fill the differential up to the top of the pin.
DO NOT fill the diff. to the top of the housing.
SILICONE OIL 500000
03300-2
03301
03363
92001
M3 x6
92001
M3 x6
03301
03095
03087-3
03328-1
98001
M3X6
03328-S
03137-2
03136-1
03137-2
93010
M2.5 x 5
03137-3
03137-3
APPLY THREADLOCK
(BLUE)
1,4
91001
M3X10
03237
Ø3x55
93001
M3 x6
03276
3x7x2
5
03328-H (hard)
OPTIONAL
03301-2
03095
APPLY THREADLOCK
(BLUE)
LUBRICATE
Rear
Front
BAG.2
03159
03158-2
03304-1
93001
M3 x6
PUT SHIMS
TO ADJUST BRAKE
EXCURSION
93001
M3 x6
92001
M3 x6
03304
93002
M3 x8
03386
177 T
PLEASE NOTE THE ORIENTATION OF
THE EXCENTERS
6
03300-6
5X10X0.2
APPLY GLUE
ON THE
COLORED FACES
98000
M3x3
03069-3
90019
5x8x2.5 Flanged
98000
M3x3
03069-3
90008
6x10x3 Flanged
90008
6x10x3 Flanged
03355
03370
99001
Ø 8
03355-20T
03365
03397
97016
Ø2x12
03355-18T
99004
Ø 6
98012
M4x4
48T
47T
OPTIONAL
COD (2ND)
03347-47
03347-48
STANDARD
SPEED GEAR
STANDARD
53T
03347-53
52T
03347-52
COD (1ST)
OPTIONAL
OPTIONAL
03347-54
49T54T
03347-49
OPTIONAL
Additional
Bearing 90001
6x10x3 Optional
Additional
Bearing 90001
6x10x3 Optional
03348
92010
M2.5 x 5
03347-53
03347-48
90008
6x10x3 Flanged
03349
90008
6x10x3 Flanged
92010
M2.5 x 5
REAR ANTI ROLL BAR
7
BAG.3
OPTIONAL
Ø
Ø 2
03378
ANTI ROLL BAR
COD
OPTIONAL
03378-6 Ø 2.6
03378-3
STANDARD IN KIT
Ø 2.3
93003
M3 x10
98003
M3X4
03241-1
03350
03351
03241-1
26,8
B
14.5
99004
Ø 6
97020
Ø2.5x10
97004
Ø2x8
03185
93001
M3 x6
93001
M3 x6
03307-3
90019
5x8x2.5 Flanged
03186
CLUTCH ADJUST
8
Loading...