Worksman Adaptable Industrial Tricycle Owner’s Manual
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Models ADP, ADB, ADC, ADBB, -CB, -3CB, -NDB
Congratulations! You have purchased a true industrial tricycle – the Worksman Adaptable Industrial Tricycle.
The Adaptable is considered the father of the Worksman Business Cycle System, which is undoubtedly the
finest line of industrial cycles. These durable tricycles are used around the world by leading companies and
organizations to move personnel and supplies efficiently and safely in an environmentally friendly manner.
Before assembling and riding, make certain to read this manual and any other literature provided thoroughly.
Always follow the rules of safe riding. Always keep your Adaptable tricycle in tip-top shape by replacing worn
parts as needed with genuine Worksman Cycles parts. (Do not use generic bicycle parts.) With simple
maintenance, your Worksman Adaptable Tricycle will perform reliably day after day, year after year.
· This manual is intended as an assembly and maintenance guideline for a professional and qualified
Worksman Adaptable Tricycles - The World’s Original Industrial Tricycle
bicycle mechanic. Failure to have this cycle professionally assembled could result in injury or death.
Worksman Adaptable Parts List
Frame, Fork and Related Parts
Part # Description Part # Description
72ACB Adaptable Frame (Specify color) 60STR Fork Strap for Drum Brake
60HD Fork w/ Drum Brake Tab - Black 60HD-YEL Fork w/ Drum Brake Tab - Safety Yellow
60HD-ORG Fork w/ Drum Brake Tab - Safety Orange 60HD-SP Fork w/ Drum Brake Tab - Special color
66HD Fork w/o Drum Brake Tab - Black 66HD-YEL Fork w/o Drum Brake Tab – Safety Yel
66HD-ORG Fork w/o Drum Brake Tab - Safety Org 66HD-SP Fork w/o Drum Brake Tab - Special
48 Headset Cups (pair) 49 Headset Bearings (pair)
50A Headset Complete (48,49,52,53,54) 51 Bottom Cone (Presses on fork)
52 Top Adjusting Cone (threaded) 53 Key Washer
54 Fork Top Lock nut 55F Handlebar - Junior High Rise
55A Stem 55B Handgrips (pair)
Front Drum Brake Parts
Part # Description Part # Description
OLD STYLE
L900 Drum Brake Hub L709 Front Axle Set for Drum Brake
F817 Wheel Bearings - Loose 11 balls L725 Drum Brake Plate Kit (Internal parts kit)
NEW STYL E
L500-F Hub - NEW STYLE w/ pressed bearing L509 Axle - NEW STYLE for pressed bearing
L517 Pressed Bearing - NEW STYLE L525 Drum Brake Plate Kit (NEW STYLE)
F719 Drum Brake Cable w/ F769 and F770 F816 Axle Washer
F769 Anchor Bolt Assembly for F719 Cable F770 Adjusting Barrel for F719 Cable
L752R Brake Lever (Right) w/ Parking Lock 160B Fork Retention Clip (each)
L752L Brake Lever (Left) w/ Parking Lock L815 Outside Axle Nut (each)
Parts list ADPT09
(For all freewheel, coaster brake and three-speed coaster brake Adaptable Tricycles.)
(Old style hubs have loose bearings. New style hub has pressed bearings.)
L900 Drum Brake - Exploded View with F719 Cable Free Side Rear Wheel - Exploded View
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Parts list ADPT09
Rear Axle and Related Parts
Part # Description Part # Description
101 Hub for Free Wheel w/ Cups 102 Key Lock Washer
103 Cups for 101 Hub 105 Adjusting Cone (threaded)
106 Stationary Cone (presses onto axle) 109 Dust Washer
113 Locknut - Left Hand Thread - Free Wheel Side 146 Wheel Bearings (pair)
130 Axle Parts Set (102,105,109,113,146,59A,93D) 58A Rear Axle (31 ½”)
3980 Drive Wheel Hub 58 Rear Axle (34” – Pre 1965)
59A Locknut - Drive Side 69 Fixed Drive Sprocket
4129 Freewheel Sprocket (22 tooth) 63A Bushing for 4129 (freewheel models)
63B Set screw for 69 and 4129 63C Keyway for Rear Sprocket
91 Pillow Block Bearings (each) 91A Bolt, Nut, Washer for 91 Bearing
93 Spacer Washer for Left Side Wheel 93D Washer – Drive Side Spacer
301 1 Speed Coaster Brake Hub 404N 3 Speed Coaster Brake Hub
302 Coaster Brake Conversion Kit (for freewheel) SS13N-1 3 Speed Cable and Trigger for 404N
405 3 Speed Conversion Kit (for freewheel) SS721 Coaster Brake Internal Kit (for 301)
Crank Parts (Pedal Section) and Chains
Part # Description Part # Description
1265 Crank Parts (1266,1268,1269,1271,1272,1273,1274) 1265BMXS Deluxe Sealed Crank Set (Upgrade)
1266 Crank Bearings (pair) 1267D Complete Crank Set (36T,1265,1275,1380D)
1267F Complete Crank Set w/ 32T Sprocket 1267H Complete Crank Set w/ 28T Sprocket
1268 Cups for Crank Housing (pair) 1269 Stationary Washer (inside)
1271 Key Washer (outside) 1271 Key Washer (outside)
1272 Adjusting Cone (threaded, outside) 1273 Stationary Cone (inside)
1274 Crank Locknut 1275 Crank (one piece, forged - 6.5”)
1380D Sprocket 36 Tooth (3/16”) 1380F Sprocket 32 Tooth (3/16”)
1380H Sprocket 28 Tooth (3/16”) 7217 Pedal Set (pair)
4910 Chainguard 4914A Chain Connecting Link (1/2”x3/16”)
4914B Chain (freewheel models) 4914C Chain (long for 32T and coaster brake)
4914EE Chain (short for coaster brake) 4914F Chain (long for 36T and coaster brake)
4915 Chain Adjusters (for coaster brake)
Note - The Adaptable comes standard with a 36 tooth front sprocket and 1265 crank part set. Smaller sprockets in the front will reduce
the gear ratio, making it easier to start pedaling. The 1265BMXS is a sealed, heavier duty upgrade for crank parts.
Seats, Seatpost, Baskets, Cabinets, and Fenders
Part # Description Part # Description
6910V Saddle (wide w/o springs - standard) 6911V Saddle (wide w/ springs)
4908C Seatpost (12” x 7/8”) 7913A-V Seatpost Clamp (seatpost to seat)
4909 Bolt, Nut, Washer for 4911C 4911C Seatpost Clamp (seatpost to frame)
3927 Rear Cabinet (22”x15”x16”) 5927 Rear Wire Basket (21”x15”x9”)
7227 Rear Flat Steel Basket (24”x17”x12”) 133WH Removable Front Basket (14.5”x9.5”x9”)
7228 Front Wire Basket (21”x15”x9”) 139 Front Wire Basket (18”x13”x6”)
82 Front Fender 83A Front Fender U-Brace
82K Front Fender Hardware Kit (95, 4907, 4907A) 95 Front “L” Bracket (fender to fork)
4907 Bolts, Nut, Washer (U-brace to fender) 4907A Bolt, Nut, Washer (“L” bracket to fork)
4902 Rear Fender (24” or 26” rear wheels) 84 Rear Fender Brace Set (26”, one side)
84A Rear Fender Brace Set (24”, one side) 92 Rear Fender Brace Bracket (on frame)
4902K Rear Fender Hardware Kit (6-4905, 6-4906) 4905 Bolt, Nut, Washer (rear fender to brace)
4906 Bolt, Nut, Washer (rear fender brace to 92) AD24* Complete Rear Fender Kit (24”)
AD26* Complete Rear Fender Kit (26”)
* AD24 and AD26 include two rear fenders, braces, and all mounting hardware. (2-4902, 2-84A, 1-4902K)
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Parts list ADPT09
Wheels and Tires
Part # Description Part # Description
77A 26” Front Wheel w/ Drum Brake ADD “KVPR” TO ANY WHEEL WITH TIRE TO UP-
77 26” Front Wheel w/ Drum Brake w/ Air Tire GRADE TO KEVLAR TIRES AND PUNCTURE
77S 26” Front Wheel w/ Drum Brake w/ Solid Tire RESISTANT TUBES! (ADD TO PART #.)
78A 24” Free Side Wheel 79A 24” Drive Wheel
78 24” Free Side Wheel w/ Air Tire 79 24” Drive Wheel w/ Air Tire
78SA 26” Free Side Wheel 79SA 26” Drive Wheel
1007 26” Free Side Wheel w/ Air Tire 1010 26” Drive Wheel w/ Air Tire
78S 26” Free Side Wheel w/ Solid Tire 79S 26” Drive Wheel w/ Solid Tire
9178SA 26” Free Side Welded Mag Wheel 9179SA 26” Drive Welded Mag Wheel
9178 26” Free Side Welded Mag Wheel w/ Air Tire 9179 26” Drive Welded Mag Wheel w/ Air Tire
9178S 26” Free Side Welded Mag Wheel w/ Solid Tire 9179S 26” Drive Welded Mag Wheel w/ Solid
1008A 20” Free Side Wheel 1009A 20” Drive Wheel
1008 20” Free Side Wheel w/ Air Tire 1009 20” Drive Wheel w/ Air Tire
1008S 20” Free Side Wheel w/ Solid Tire 1009S 20” Drive Wheel w/ Solid Tire
4922A 26”x2.125” WTC Sup-r-Tire 4922E 24”x2.125” WTC Sup-r-Tire
4922AKV 26”x2.125” WTC KEVLAR Sup-r-Tire 4922EKV 24”x2.125” WTC KEVLAR Sup-r-Tire
4922AWSW 26”x2.125” White Wall Sup-r-Tire 4922EWSW 24”x2.125” White Wall Sup-r-Tire
4939 26” Solid Rubber Nev-R-Fail Tire 4938A 20” Solid Rubber Nev-R-Fail Tire
4923A 26”x2.125” Tube 4923E 24”x2.125” Tube
6023A 26”x2.125” Puncture Resistant Tube 6023E 24”x2.125” Puncture Resistant Tube
1017 26” Rim Strip 1017B 24” Rim Strip
101 Hub for Free Side Wheel 3980 Hub for Drive Side Wheel
1016 26” Rim Only (no spokes - rim only) 1016C 24” Rim Only (no spokes - rim only)
1015 20” Rim Only (no spokes - rim only) 1014C Spoke (79, 79A) (11G, 9 9/16”)
1014A Spoke (78S, 78SA, 1007) (11G, 10 9/16”) 1014B Spoke (77A, 77, 77S) (11G, 9 13/16”)
Note - Worksman Adaptable (AD) Tricycles come standard with WTC Clincher Wheels with 11gauge spokes. They are very durable.
Welded Style Wheels are available only for the rear wheels. Kevlar tires are belted air tires - ideal for preventing flats. Nev-R-Fail solid
tires are solid rubber - no flats! Solid tire upgrade increases rear wheels to 26”. Standard ADs come with 26” front and 24” rear wheels.
Safety and Comfort Accesso ries
Part # Description Part # Description
3979 Ding Dong Chime Bell 303 Squeeze Bulb Horn
3973 Mega-Horn (battery operated) 201 Cable and Lock set
4963 Rear View Mirror 5030T Reflector Set w/ Mounting Hardware
3978 Safety Flag on Pole P19 Bicycle Helmet
101710 Flashing Strobe Light (clear lens) 101714 Flashing Strobe Light (red lens)
7217-41197 Pedals with Velcro Foot Straps (pair) 3975 Generator Light Set
1006 Air Pump 1000 Spoke Wrench
2000 Chain Rivet Remover Tool 1265TW Crank Cone Wrench
1001 Pedal Wrench 3961 Cup/Mug Holder (Frame-Mounted)
6910V Saddle 7228 Front Basket
Part #’s and Specifications subject to change without notice as we are constantly seeking ways to improve our products.
21”x15”x9”
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
A
SSEMBLY INSTRUCTIONS FOR THE WORKSMAN
ADAPTABLE™ I
NDUSTRIAL TRICYCLE
:
Parts list ADPT09
Your Worksman Adaptable™ Industrial Tricycle has been hand made by American Craftspeople at
our Ozone Park, New York City factory. We take great pride in each and every Worksman Business
Cycle that we manufacture and appreciate your support. Please read this manual carefully prior to
performing the simple finishing assembly and prior to riding. Keep these instructions as our parts list
is contained within this document which you will need for future reference.
Carefully remove the tricycle from the carton. You will notice the tricycle is mostly pre-assembled at
the factory. Some finishing assembly is required.
The front wheel and the fork assembly is pre-assembled at the factory
TO ATTACH FRONT FORK/WHEEL ASSEMBLY TO THE FRAME:
1) Grease cups (48) with Rustolene 200 lubricant or equal. Bearings (49) are pregreased at the factory, but it is always a good idea to add lubrication prior to
assembly.
2) Place one bearing (#49) onto the fork steering tube with the balls facing up.
3) Slide the threaded fork (50HD) steering tube into the frame head.
4) Place the other bearing on the top of the fork tube with the balls facing down towards
the cup (#48), which is already pressed onto the frame.
5) Install the top adjusting cone (#52) onto the treaded fork steering tube. Hand-
tighten, making certain the bearings do not bind. After hand tightening, turn back ¼ turn.
6) Install the fork key washer (#53) and reflector bracket (if reflectors were ordered)
on top of the adjusting cone with tip of washer in slot on steering tube.
7) Install head lock nut (#54) and securely tighten. Make sure that the fork rotates freely
without being loose. Excess play or resistance must be adjusted. Failure to adjust
properly can lead to improper steering response.
8) Install handlebar stem (55A) into the fork steering tube with the handlebar clamp
facing forward. The stem must be inserted far enough to reach the minimum insertion
line. Tighten the stem bolt slightly at this point. Loosen the handlebar clamp nut and
slide the handlebar through the clamp centering the knurled center section of the
handlebar into the clamp. Position the handlebar to the desired angle and tighten clamp
securely. Recommended torque is 300 IN. LBS. Adjust the handlebar rotation so that it
is perpendicular to the front wheel when it is perfectly straight. Tighten stem bolt
securely. Recommended torque 240 IN. LBS. Be sure not to over tighten as damage to
the parts may occur causing steering failure.
9) Attach brake hand lever to the handlebar (either left or right depending upon the
rider’s preference) Make sure brake cable is not tangled in anyway.
INSTALLING PEDALS:
Pedals are marked on the shaft with either an “L” or “R” denoting left or right. The “R” pedal fits on the right (sprocket
side) of the crank arm. Tighten clockwise. The “L” pedal fits on the left side of the crank arm. Tighten counter-clockwise
(left-hand thread). Securely tighten. Recommended torque 275 IN. LBS. CAUTION: Tightening in the wrong direction
will damage the crank and pedal threads.
SEAT ADJUSTMENTS:
Although the seat is already installed at the factory, adjust the height to your desired level by loosening the seat clamp nut
at the top of the frame’s seat tube. Re-tighten at desired height. Make sure a minimum of 3 1/2” of the post remains in
the frame tube. Never adjust post above this level. Adjust angle of seat with nose raised slightly. Tighten seat clamp
securely. (240 IN. LBS.)
REAR FENDERS:
Attach fender braces to fender, and fender braces to mounting bracket on frame using the provided nuts, bolts, and
washers. Be sure to install the smaller fender brace in the middle. Bend braces slightly if tire is rubbing the brace.
.
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Parts list ADPT09
1 72ACB Frame
2 50HD Fork
3 77 Front Wheels
4 L900 Drum Brake
5 78 Free Wheels
6 79 Drive Wheels
7 58A Rear Axle
8 1275 Crank
9 914 Chains
10 3927 Cabinet
11 6910V/11V Seats
12 55F Handlebar
13 55A Stem
14 F719 Brake Cbl
15 7217 Pedals
16 91 Axle Bearing
17 69 Fixed Gear or
18 4908C Seatpost
19 4911C Clamp
20 4910 Chainguard
21 55B Handgrips
22 L752L/R Levers
23 4902 Fender
24 84 Fender Braces
25 1380 Sprockets
26 83A Brace
4129 Freewheel
MAINTENANCE TIPS:
Always inspect your Worksman Cycle to ensure that all nuts, bolts, screws and hardware are tight and that no parts are
worn or damaged. Do not attempt to straighten bent forks or frames.
Chain:
Lubricate chain once a month or as needed with light oil.
Replace sprockets when teeth become worn, bent or broken.
Keep chain adjusted so there is no more than 3/8” slack. Note
that we make the chains tight at the factory, as we do know
they will stretch during the break-in period.
Lubricate crank parts every six months. Replace pedals when the surface is worn or if axle becomes “tight” or frozen.
Drum Brake:
Your Worksman Adaptable Tricycle may be equipped with an automotive type front drum brake.
This brake is ideal for slowing your vehicle smoothly and reliably. It is engaged by squeezing
the hand lever on the handlebar. To use “Park” feature, when cycle is completely stopped,
squeeze hand lever and push in parking plunger button on lever. To disengage, simply
squeeze lever until parking plunger button releases.
Drum brakes are pre-adjusted at the factory. Readjust the cable tension as necessary using the
adjusting barrel so that wheel spins freely and stops when brake is applied. Always replace
worn brake cables (F719) and damaged hand levers. Internal parts kits are available for your
drum brake (See parts list for part #’s.).
Coaster Brake (if applicable):
Foot activated coaster brakes are easy to use and reliable. To activate this internal brake, reverse the pedaling motion
until the brake engages. To avoid skidding and maintain control, apply care when braking. This is especially true on wet
surfaces. Apply brakes gently, gradually increasing pressure. Replace coaster brakes when they become worn. Check
chain tension regularly. Coaster brake hubs may make a vibrating noise under braking until they are broken in. For three
speed units, pause pedaling to help mesh gears. (Let the cycle coast.) This will make shifts smoother and will reduce
wear and tear on the hub. Do not shift when pedals are not moving as damage could occur.
Tires:
Always check for worn or damaged tires. We recommend 40PSI as proper level of inflation. Replace tires that are worn
or cut immediately. Replace or repair tubes that show leaks.
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Parts list ADPT09
LIMITED WARRANTY:
THIS CYCLE IS WARRANTIED AGAINST FAULTY PARTS UNDER THE FOLLOWING CONDITIONS: THIS WARRANTY DOES NOT
COVER ANY FAILURE DUE TO ACCIDENT, ABUSE, MISUSE, NEGLECT OR AS THE RESULT OF NORMAL WEAR AND TEAR,
OR IMPROPER ASSEMBLY. THE ENTIRE FRAME, INCLUDING ALL WELDED JOINTS, IS WARRANTED TO BE FREE FROM
DEFECTS AND MATERIAL FOR ONE YEAR WHILE IN POSSESSION OF THE ORIGINAL PURCHASER. ALL OTHER PARTS ON
THIS CYCLE, EXCEPT TIRES AND TUBES, ARE WARRANTIED FOR NINETY DAYS FROM THE DATE OF PURCHASE. REPAIR
AND REPLACEMENT OF THESE PARTS IS TO BE ACCORDING THE WORKSMAN CYCLES PARTS AND SERVICE
PROCEDURES AND MUST BE HANDLED DIRECTLY THROUGH THE SOURCE WHERE THE CYCLE WAS PURCHASED. IF
UPON EXAMINATION OF THE PARTS IN QUESTION, THE WORKSMAN CYCLE DEALER DETERMINES THAT IT IS DEFECTIVE,
EITHER REPAIR OR REPLACEMENT WILL BE MADE AT NO COST EXCEPT THE COST OF TRANSPORTATION AND LABOR
CHARGES (IF ANY). UNAUTHORIZED REPAIRS OR REPLACEMENT AUTOMATICALLY VOIDS WARRANTY. PROPER
MAINTENANCE IS REQUIRED FOR WARRANTY TO BE VALID. IN THE EVENT THAT IT WAS DETERMINED THAT THE
WARRANTY CLAIM IS THE RESULT OF MISUSE, ABUSE, IMPROPER MAINTENANCE OR SIMPLY NOT DEFECTIVE OR
BEYOND THE WARRANTY PERIOD, WORKSMAN CYCLES OR THE DEALER WILL ADVISE YOU AS TO THE COST OF REPAIR,
REPLACEMENT OR LABOR PRIOR TO PERFORMING ANY WORK OR REPLACING ANY PARTS. IF YOU CHOOSE NOT TO
HAVE THE DEALER OR WORKSMAN CYCLES PERFORM THE WORK, THE PARTS WILL BE RETURNED TO YOU AT YOUR
EXPENSE OR DISCARDED IF NO REPLY IS RECEIVED WITHIN 2 WEEKS OF NOTIFICATION. THE SOLE RESPONSIBILITY OF
THE MANUFACTURER TO THE TERMS OF THIS WARRANTY, IF ANY, SHALL BE THE REPAIR AND/OR REPLACEMENT OF THE
PARTS AS INDICATED ABOVE. THE LIABILITY OF THE MANUFACTURER SHALL IN NO EVENT EXCEED THE ORIGINAL
PURCHASE PRICE OF THE PRODUCT, AND THE MANUFACTURER SHALL NOT BE RESPONSIBLE FOR ANY
CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT BY WAY OF LIMITATION, DAMAGES FOR PERSONAL
INJURY OR PROPERTY. THIS STATEMENT CONSTITUTES THE EXCLUSIVE EXPRESSION OF WARRANTIES BY THE
MANUFACTURER AND IS IN LIEU OF ANY OR ALL OTHER WARRANTIES SUCH AS EXPRESSED WARRANTIES, IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, AND FITNESS OR PURPOSE, ARE
LIMITED IN DURATION FOR ONE YEAR FROM THE DATE OF PURCHASE OF THE FRAME ONLY AND 90 DAYS FOR ALL
OTHER PARTS, EXCEPT TIRES AND TUBES WHICH ARE NOT WARRANTED. WORKSMAN TRADING CORPORATION IS THE
MANUFACTURER. MISUSE OF THE CYCLES INCLUDING OFF ROAD RIDING, INSTALLATION OF MOTORS OR POWER
ASSISTS, ALTERATIONS, REPAIRS USING PARTS OTHER THAN GENUINE WORKSMAN CYCLE PARTS VOIDS WARRANTY.
WORKSMAN TRADING CORPORATION IS NOT RESPONSIBLE FOR MAINTAINING RECORDS OF SERIAL NUMBERS. VOID
WHERE PROHIBITED BY STATE LAW.
MAINTENANCE LOG
DATE MAINTAINED MAINTENANCE PERFORMED
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
_________________ ________________________________________________________________________________________
RULES FOR SAFE RIDING AND RESPO NSIBLE OPERATION: Carefully read this manual before operating the cycle.
· It is the responsibility of the person who completes the assembly to properly install all parts included and to inspect the cycle prior to riding to
insure proper operation.
· Operator is responsible for required maintenance to keep the cycle in good operation condition.
· Observe all traffic regulations in the operating environment. (Stop signs, etc.)
· Keep to the right and in a straight line. Ride in single file.
· Do not ride outdoors at night, and have appropriate signaling device as needed. (We recommend the 3973 Mega Horn.)
· Give pedestrians the Right of Way
· Always look around you to understand the riding environment and hazards.
· Do not carry passengers.
· Check brakes prior to riding.
· Slow down when approaching turns or intersections. Tricycles are meant for slow pace rides, not for racing.
· Use proper hand signals when turning or stopping.
· Recommended safety options include, but are not limited to, an approved helmet, audible warning device, front/rear lights and/or reflectors.
· Never ride the cycle if there are known repairs required.
· Do not exceed the recommended weight capacity of the cycle. (450 lbs., including the rider.)
· Place loads evenly on platform. Do not stack cargo too high and always secure cargo with appropriate tie down straps.
· Wipe surface of cycle clean and dry when exposed to corrosive substances or environment.
· Operate cycle at slow speeds, particularly in high traffic areas.
· Operators of cycles should be in good physical condition. Ride at your own risk.
· Wear proper riding attire. Check shoelaces and pant legs prior to riding so they do not become engaged in the chain and sprocket.
· Ride only on smooth, paved surfaces. Do not use off road.
· Do not operate a tricycle on steep grades. They are designed for relatively level, paved surfaces only.
· Always replace worn parts with genuine Worksman Cycle Repair Parts.
· Always keep both hands on the handlebars. Tricycles have a tendency to pull slightly to one side.
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
Parts list ADPT09
HERE ARE SOME OTHER EXCITING PRODUCTS FROM WORKS MAN CYCLES…
Worksman Front-Loaders
Worksman Executive Trike
Worksman Movers
Worksman Heavy-Duty Industrial and Recreational Bicycles
Worksman Recreational Tricycles
Vending Carts
800BUYCART.com
Worksman Trading Corporation – 94-15 100th Street – Ozone Park, NY 11416 – (718) 322-2000
www.worksmancycles.com
FAX THIS COMPLETED REGISTRATION FORM TO 718-529-4803 OR MAIL TO THE ADDRESS ABOVE:
Name of Purchaser: ______________________ Company Name: ____________________________
Mailing Address: _________________________________________________________
Tel: __________________________
Fax: __________________________
Email: __________________________
Date of Purchase: __________________________
Dealer Name: _________________________________________________________
Address of Dealer: _________________________________________________________
___________________________ ______ _____________________
Serial Number (located under crank housing): ________________________ Color_______________________
NOTES
SIGNATURE: __________________________________ DATE: ______________________
Parts list ADPT09
___________________________ ______ _____________________
Worksman Business Cycles are hard at work at most of the
World's most respected companies. Worksman Business
Cycles are on the job 24-7/365 at this facility and many others
around the world. Worksman Business Cycles have set the
industry standard for over a century!
How do Worksman Business Cycles really help your business?
When you need an efficient method of transportation to move personnel around a
large facility, the solution is simple! Many of the World’s largest companies already
know that Worksman Business Cycles are the low cost alternative to motorized
vehicles. They also realize that workers who spend time walking around a factory or
warehouse are simply not as
productive as they could be.
The simple chart above illustrates how Worksman
Business Cycles pay for themselves in a very short
period of time when productivity gains are considered.
The chart is actually conservative, but Worksman
Business Cycles are about far more than economics.
Workers who ride them benefit through aerobic
exercise and a healthier environment in which to
work. People actually enjoy riding them, which often
leads to improved worker morale. When you consider
load carrying capacity, Worksman Business Cycles
are a great choice. Just think of how tired you would
be walking on concrete floors, back and forth, often
carrying tools or supplies.
Worksman Business Cycles are ideal for and used in:
*Warehouses *Factories *Campuses *Universities *Resorts
*Refineries *Distribution Centers *Airports *Movie Studios *Mills
*Chemical Plants *Amusement Parks *Delivery Services *Hospitals
Visit us online at www.worksmancycles.com or call us at 888-3WHEELER!
Loading...