Workrite PA-MIS User Manual
#1500156 - Rev A
!
PA-MIS-E Mounting Plate Adaptor Assembly Instructions
100 X 200 VESA Plate
A
Qty: 1
Attach 100 x 200 VESA Plate (A) to the LCD
1
screen using six screws. See note below regarding
screws.
C or D
A
M4 Nut
B
Qty: 4
M4x10mm Screw
C
Qty: 6 D
Attach LCD screen to 100 x 100 VESA Mount on
2
Arm using four M4 Nuts (B).
B
M4x6mm Screw
Qty: 6
Note: It is strongly recommended to use the mounting
screws provided by the LCD monitor manufacturer. Due
to the variety of monitor mounting designs, the mounting
holes at the back of the LCD monitor might not be suitable
for the M4 screws we have provided and could cause
damage to the LCD monitor.
To install and adjust your monitor arm, see the instructions
included with the arm you ordered.
Loading...