Workrite Glide 2 User Manual
.75
3131 or 3132
numbers starting with
*provided with model
G
Qty: 1*
Qty: 1
H
I
Mouse Wrist Rest
F
Document Holder
Qty: 1
User Guide
E
Qty: 1
Non-skid Mat
Qty: 4
Cord Clips
D
Qty: 4
10 x 32 Kep-nuts
Qty: 4
at-head screws
#10 x 32 x ½" Phillips
Verify that you have all the hardware
needed for the assembly.
#2 Phillips-head Screwdriver
Replacement Parts:
Document Holder ....................................3500131
Mouse Trap ............................................3500130
Hardware Kit ..........................................4200125
Pop Beads ..............................................3300139
Keyboard Wrist Rest - Charcoal .................4601711
Keyboard Wrist Rest - Cool Gray ...............4601712
Keyboard Wrist Rest - Charcoal Jel ............4611711
Keyboard Wrist Rest - Cool Gray Jel ...........4611712
Mouse Wrist Rest - Charcoal ..................... 3120-11
Mouse Wrist Rest - Cool Gray.................... 3120-12
Mouse Wrist Rest - Charcoal Jel ...............3120-11J
Mouse Wrist Rest - Cool Gray Jel .............. 3120-12J
A
B
Qty: 1
Mouse Trap
Qty: 1 C
Keyboard and Mouse Platform
Workrite Glide Parts
Installation Instructions
for Workrite Glide
™
Workrite Ergonomics® is a federally registered trademark and Workrite Glide™ is a registered
trademark of Workrite Ergonomics, ©2010 Workrite Ergonomics, All Rights Reserved
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
#1500143 - Rev B
Installation Instructions for Workrite Glide #1500143 - Rev A
Slide Mouse Trap onto back
1
E
3
2
3
4
5
A
F
6
C
4
7
edge of Mouse Platform.
Attach Platform to Track
Arm using four Screws and
Kep-nuts provided.
Note: If installing on Locking
Lever Arm, use longer bolts
provided with the Locking Lever
Arm - not the screws in this kit.
Place Non-skid Mat on top
of Keyboard Platform.
Snap Document Holder onto
back of Keyboard Platform.
Adhere Cord Clips to sides
of Track Arm.
Attach User Guide to under
side of worksurface. (Guide
protrudes from front edge of
worksurface.)
If provided, clip Mouse Wrist
Rest onto Mouse Platform.
Locking Lever Arm
B
I
7
6
H
G
NOTE - Track Arm must be
!
installed under worksurface
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
before attaching Platform
2
D
5
1
Loading...