Workrite Glide User Manual

Workrite

™

At Workrite we believe every body has

a right to work comfortably and safely

for maximum productivity. You can

trust Workrite, as 75% of Fortune 100

companies have, for solutions that t

today’s diverse range of workers.

1450 Technology Lane
Petaluma, CA 94954
Telephone: [phone] or 707.780.6400
Fax: [phone]
www.workriteergo.com

Glide

User Guide

1400012 Rev C 1111

©2011 Workrite Ergonomics, Inc.
All rights reserved. Information contained within this document is
subject to change without notice.

Instructions Instructions

ORIENTATION

ADJUSTING THE KEYBOARD PLATFORM

RAISING AND LOWERING THE KEYBOARD PLATFORM

Keyboard Arm

Keyboard Platform

Pivot Arm

Tilt Knob

Mouse Platform

Raise:

Lift up from front edge

Lower:

1. Push down back of keyboard
platform

2. Lift front of keyboard platform

ADJUSTING KEYBOARD PLATFORM TILT

Increase tilt :

Turn tilt knob clockwise

Decrease tilt :

Turn tilt knob

counter-clockwise

Refer to tilt guage
for specic setting

THE GLIDE KEYBOARD SYSTEM

GET YOUR KEYBOARD IN THE RIGHT POSITION

Workrite Glide is the ideal platform for

mouse intensive applications. It adapts to

your unique work environment as well as

your task at hand. Place the mouse surface

anywhere along the keyboard tray edge and

tilt through a full range of motion to nd the

perfect comfort angle.

Use these guidelines or work with your

company’s ergonomist or health and safety

coordinator for answers on nding the most

comfortable computing position.

Arrange the height and tilt of your keyboard
so that when your elbows are relaxed with
forearm angled slightly downwards the
keyboard platform is at an angle so that
wrists are not angled up or down.
Instructions to move your keyboard
platform are on the inside.

GET YOUR MOUSE IN THE RIGHT POSITION

Sandy

5’0”

Position the mouse platform so that you hand can hover over the
mousing area while your elbow is comfortably at your side. The best
position for your mouse platform will vary for each individual depending
on their furniture and body dimensions. Instructions to move your
mouse platform are on the inside.

Chris

5’8”

Pat

6’4”

OTHER PLATFORM LOCATIONS

Mouse Over is ideal for
those who rarely use
the 10 key.

Mouse Down is ideal
for taller input devices
such as joysticks.

Left handed users get
all the benets of
Glide.

ADJUSTING THE MOUSE PLATFORM

THE PIVOT ARM – your key for adjusting the mouse platform

Pivot Arm

Pull “A” to release the Pivot Arm,
pulling the mouse platform away
from the keyboard platform

MOUSE PLATFORM

In-Line

Mouse-Forward™

Mouse-Back™

Pivot Arm

1. Pull out mouse pad at "A".

2. Rotate Pivot Arm forward and
release to lock in position level
with keyboard.

3. Rotate mouse pad.

1. Pull out mouse pad at "A".

2. Rotate Pivot Arm forward and
release to lock in position level
with keyboard.

3. Rotate mouse pad.

1. Pull out mouse pad at "A".

2. Rotate Pivot Arm back and
release to lock in position level
with keyboard.

3. Pull "B".

4. Rotate mouse pad.

Pivot Arm locks in 8 positionsRotate the Pivot Arm Mouse Pad rotates 360˚

Mouse-Below

Mouse-Over™

Mouse-Left

1. Pull out mouse pad at "A".

2. Rotate Pivot Arm down and
release to lock in mid or full
height position.

3. Rotate mouse pad.

1. Pull out mouse pad at "A".

2. Rotate Pivot Arm upright and
release to lock in mid or full
height position.

3. Rotate mouse pad.

4. Push left to place the mouse pad
over the keyboard.

1. Pull mouse pad at "B" and slide to
opposite side of keyboard.

Questions: workriteergo.com/glide