Workrite Gemini Arm Platform Adaptor User Manual
4
CONTINUED
Classic Reversible Keyboard Platforms
#10-32 X 1-1/8" FLAT HEAD SCREWS
6X
(PROVIDED WITH ADAPTOR KIT)
#10 WASHERS
6X
(PROVIDED WITH ADAPTOR KIT)
#10-32 KEPS NUTS
6X
(PROVIDED WITH PLATFORM)
Ultra-Thin Keyboard Platforms
#10-32 X 5/8" FLAT HEAD SCREWS
6X
(PROVIDED WITH ADAPTOR KIT)
#10 WASHERS
6X
(PROVIDED WITH ADAPTOR KIT)
#10-32 KEPS NUTS
6X
(PROVIDED WITH PLATFORM)
PLATFORM
ADAPTOR
Gemini Arm Platform Adaptor
PLATFORM
ADAPTOR
CONTINUED
INSTALLATION INSTRUCTIONS
Model# UB-04933 Fits 2420-20/2440-20
Model# UB-04985 Fits 2420-23/2440-23
Model# UB-04986 Fits 2420-27/2440-27
WorkRite Ergonomics
1450 Technology Lane
Petaluma, CA 94954
ph: 800.959.9675
fx: 800.930.8989
www.workriteergo.com
© 2004 WorkRite Ergonomics, Inc. All Rights Reserved
#1500080
CONTENTS
1
10X
6X
6X
12X
Platform Adaptor
#10-32 X 5/8" Phillips Flat Head Screws
#10-32 Keps Nuts
#10-32 X 1-1/8" Phillips Flat Head Screws
#10 Washers
Install Gemini Arm
Install the Gemini Arm to your
workstation as shown in the
Gemini Arm Installation
Instructions.
3
4
Attach the T-Pull
#10-32 X 5/8"
USE MIDDLE HOLE
Attach the T-Pull with two #10-32 X
5/8" Phillips flat head screws, #10
washers, and #10-32 keps nuts.
(See diagram for pull location to
match your platform depth)
FOR 11.5" DEEP PLATFORMS
FOR 13" DEEP PLATFORMS
Attach Your Keyboard Platform
See the following diagrams to attach your WorkRite keyboard
platform to the Gemini Arm Platform Adaptor.
2
#10-32 X 5/8"
Attach the Platform Adaptor
Attach the Platform Adaptor with
four #10-32 X 5/8" Phillips flat head
screws, #10 washers and
#10-32 keps nuts.
180S / 2180S / 2180SN Keyboard Platforms
STUDS
#10-32 KEPS NUTS
4X
(PROVIDED WITH PLATFORM)
Classic Keyboard Platforms With Insert
INSERT
#10-32 X 5/8" PAN HEAD SCREWS
6X
(PROVIDED WITH PLATFORM)
PLATFORM
ADAPTOR
PLATFORM
ADAPTOR
CONTINUED
Loading...