Workrite Fundamentals User Manual 02

Fundamentals AKP02 Keyboard Platform System – Instructions #1500218 - Rev A

Assembly Instructions: Fundamentals AKP 02

Parts

Pinnacle 2 Value

A

Keyboard Arm
Qty: 1

Verify that you have all the hardware needed for the assembly.

ü

Phillips-head screwdriver

Mount the Keyboard Arm to

1

the Worksurface

Use the instructions that came
with the Keyboard Arm to mount
arm under worksurface.

Mouse-Over

B

Keyboard Platform
Qty: 1

#10 × ½" Sheet

C

Metal Screws
Qty: 4

#10–24 × ½” Flat

D

Head Screw
Qty: 1

D

3

Attach Keyboard Platform to

2

Keyboard Arm

Attach Keyboard Platform (B)
to Arm (A) using the four Sheet
Metal Screws (C) provided.

Attach Mouse Platform to

3

Keyboard Platform

Slide the Mouse Platform on either
the right or left side and attach
with #10–24 × ¾" Flat Head
Screw (D)

Place Mousing Surface on

4

Keyboard Platform

Remove protective lm from

bottom of mouse pad and place on
mousing surface.

B

Under

Platform

Above arm &

worksurface

A

2

1

C

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 1