Workrite Ciglio Child User Manual
Workrite Ciglio LED Under-Cabinet Child Lights - Assembly Instructions #1500226 Rev A
!
Assembly Instructions:
Ciglio Under-Cabinet Light
Daisy Chain Child Models
Parts
Light Fixture
A
Qty: 1 B
When installing child units, conrm the parent unit of daisy chain is positioned so that it can be
connected to the additional unit with the supplied jumper cable(s).
Mount to Cabinet
1
Determine if light will be afxed to a metal or wood cabinet and follow the appropriate step below.
Mount to METAL Cabinets:
Place Magnetic Mounts (B) onto back of
a
Light Fixture (A).
Attach Light Fixture to metal under-cabinet.
b
Magnets will hold the xture in place.
Universal Mounting Kit
Qty: 2
Daisy Chain Child Model
B
a
Jumper Cable, 3",
C
6", 12", 24" or 60"
Qty: 1
Place lamp
under cabinet
A
b
OR
Mount to Wood Cabinets:
Note: You will need a #2 Phillips-head screwdriver to complete this step.
Determine where you want to mount
a
your light and draw a straight line on the
underside of the cabinet to indicate the
center along the length of the light.
Attach the Universal Mounts (B) along
b
your line with Screws provided by
inserting screw through magnet and then
screwing into marked location.
Attach Light Fixture (A) onto mounts.
c
Magnets will hold the xture in place.
1 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
a
b
Attach Mounts
along drawn
line
8"–15" depending on size
Draw line parallel to
edge of cabinet
Draw line
Under-cabinet
B
c
Lift light
onto mounts
A
Workrite Ciglio LED Under-Cabinet Child Lights - Assembly Instructions #1500226 Rev A
Attach Child Light to Parent Unit
2
Varies in length
C
Secure Jumper Cables (C) between each
of the lights in the chain. The order of the
lights does not matter as long as the the
Parent
Daisy Chain Child
parent unit is included in the chain.
Conrm Parent Unit is Plugged in Then Turn On
3
Conrm Parent unit is installed according to its instructions and turn on PARENT unit to turn on all
daisy chained lights.
Note: Daisy chain systems can be powered via Child or Parent units.
Maximum Daisy Chain Units
!
CAUTION! To reduce the risk of re, electric
shock and injury refer to the chart at right for
maximum daisy-chained units:
Daisy Chain Configuration Examples
Supports up to 80" of actual fixture length
35"
Parent
1 1 2
1 1 1 3
1 2 3
27"
Parent
1 1 1 3
1 2 3
1 1 1 3
1 3 4
20"
Parent
1 1 1 3
1 2 3
1 3 4
32"
Child /
Jumper
24"
Child /
Jumper
17"
Child /
Jumper
Maximum
fixtures per
daisy chain
Replacement parts
i
Universal Mounting Kit ..................................CIG-MOUNT
3" Jumper Cable ...........................................CIG-CABLE-03
6" Jumper Cable ...........................................CIG-CABLE-06
12" Jumper Cable .........................................CIG-CABLE-12
24" Jumper Cable .........................................CIG-CABLE-24
60" Jumper Cable .........................................CIG-CABLE-60
2 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Loading...