Workrite Astra Tool Bar Mounts User Manual
#1500150 - Rev B
Assembly Instructions for
AstraTM Sierra Tool Bar Mount
Parts
Tool Bar Mounting
A
Bracket
Qty: 1
Verify that you have all the hardware needed for the assembly.
Phillips-head screwdriver
Attach Mount to Tool Bar Mounting
1
Bracket
Attach Mount to Tool Bar Mounting Bracket
a
with four screws, using a Phillips-head
screwdriver. Keep cushion that comes with
Mount for Step 2.
Tool Bar Mounting
B
Plate
Qty: 1
Workrite Astra
Astra Light
A
M8 x 14mm
C
Screws
Qty: 2
Hex wrench
F
Qty: 1
Workrite Astra
2
a
b
Attach Mount to Tool Bar
Loosely attach screws to Mounting Bracket
and Mounting Plate.
Slide Mounting Plate into Tool Bar opening.
Move Astra Mount to desired position on
Tool Bar and tighten screws using the Hex
Wrench provided.
M5 x 10mm
D
Screws
Qty: 4
Mount
E
Qty: 1
b
b
B
a
D
Secure Tool Bar and Attach Astra
3
Attach Stanchion to side of Tool Bar and tighten to worksurface.
a
Attach assembled lamp to Mount
b
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
a
C
F
#1500150 - Rev B
Assembly Instructions for
AstraTM Panel System Mount
Parts
Panel Mounting
A
Bracket
Qty: 1
Verify that you have all the hardware needed for the assembly.
Phillips-head screwdriver
Attach Mount to Panel Mounting Bracket
1
Determine if mounting on left or right of vertical
panel seam.
a
Attach Mount to Panel Mounting Bracket with
four screws provided, using a Phillips-head
screwdriver.
Panel Mounting
B
Hook
Qty: 1 each
10-32 x .75"
C
10-32 x .5"
D
Workrite Astra
Astra Light
Phillips-head screw
Qty: 2
Phillips-head screw
Qty: 2
Workrite Astra
F
E
A
E
Mount
Qty: 1
M5 x 10mm
F
Phillips-head
Screws
Qty: 4
Right-side mountingLeft-side mounting
Attach Panel Mounting Hook to Mount
2
Slide teeth of appropriate Mounting Hook
(left or right) all the way through holes in
a
Mounting Bracket.
Tip Mounting Hook and insert teeth into
b
panel system slots, push down for secure
connection.
Insert and tighten Phillips-head screws to
c
eliminate movement.
Attach Astra
3
Attach assembled lamp to Mount
a
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
C or D
B
Mount must have secure t.
Use longer #10 screws if they
will t without sticking out.
Otherwise, use shorter screws.
a
b
C or D
a
Right-side mountingLeft-side mounting
c
Loading...