Wooyoung Telecom U90A Users Manual

1. Precautions

2. Items

3. Setting up the LCD monitor

4. Adjusting the Monitor

5. Appendix

6. Power Saver

7. Trouble shooting

Plug & Play

The adoption of the new VESA Plug and Play solution eliminates complicated and
time consuming setup. It allows you to install your monitor in a Plug and Play compati­ble system without the usual hassles and confusion. Your PC system can easily identi­fy and configure itself for use with your display. This monitor automatically tells the PC
system its Extended Display Identification Data (EDID) using Display Data Channel
(DDC) protocols so the PC system can automatically configure itself to use the flat
panel display.

1

Precautions

Warning :

Plug the power cord into a
properly grounded outlet.

There is the risk of electric
shock.

Do not unplug from the outlet
by pulling the power cord or
when your hands are wet.

There is the risk of electric
shock and fire.

The following information will help you avoid the risk of electric shock, serious injury, and death.

If you hear a noise or smell
smoke from the computer or
adaptor, unplug the power cord
immediately, and call the service
center. There is the risk of elec­tric shock or fire.

Do not bend the power cord
excessively or place heavy objects
on it. Keep children and pets away
from the power cord as they may
damage the power cord. There is
the risk of electric shock and fire.

Do not overload an electrical
outlet with too many devices.

There is the risk of fire.

Do not use a damaged power
cord or plug. Make sure the
plug fits snugly into the outlet.

There is the risk of electric
shock or fire.

Do not allow any object or liq­uid to enter inside the monitor.

There is the risk of electric
shock, fire, or damage to the
monitor.

Caution :

Use a proper voltage/current
level indicated

The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor.

Do not attempt to disassemble,
fix, or modify the monitor.

There is the risk of electric
shock or fire.

Do not clean the LCD with
abrasive chemicals.

There is the risk of damage to
the LCD.

Do not scratch and damage
the LCD with sharp objects.

Do not expose the monitor to
the direct sun light.

1

Keep the monitor away from high
temperature, humidity, and dust.

■Operating environment
=0~25degrees Celsius

■Operating environment
=30~80relative humidity.

Do not block the fan louvers.
There is the risk of fire or dam-

age to the monitor.

Keep the monitor away from
objects and electrical appli­ances that may generate elec­tromagnetic fields.

Place the monitor on a flat, sta­ble surface. The monitor may
fall and there is the risk of
damage or injury

Unplug the power cord when
the monitor is not in use for a
prolonged period of time.

2