Wooyoung Telecom HL710S User Manual
H L 7 1 0 S
High Resolution
TFT LCD Monitor
User’s
Manual
WOO YOUNG Telecom CO.,LTD.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, with can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment.
Contents
1. Before Setting up
Brief Specification of LCD Monitor
Precautions
·····································
Instruction for Cleaning the Monitor
2. Items
········································
3. Setting up the LCD monitor
Where is a good place to position the monitor?
································
·························
························
·························
·················
How to connect the power cord and the several cables to the LCD monitor.··11
Plug & Play
Warm-up Time
4. Adjusting The Monitor
The Function Control Buttons
How to use the Hot Key.
Main OSD Menu
BRIGHTNESS/CONTRAST
COLOR
POSITION &CLOCK/PHASE
OSD FUNCTION ADJUSTMENT
·····································
···································
·····························
···························
······························
··································
····························
·······································
···························
·························
3
3
4
7
8
10
10
12
12
13
13
13
14
14
15
15
17
SETUP MENU····························· 17
1
5. Appendix
Display Modes
·····································
···································
15-pin D-Sub Connector
DPMS Power Saving Mode
18
18
······························
····························
19
20
6. Troubleshooting
································
21
2
1
This is 17.0 inch TFT-LCD monitor. Before setting up the LCD Monitor, please read
this manual to help your understanding of the LCD Monitor.
Before setting up
Brief Specification of LCD Monitor
● Resolution : 17.0 inch SXGA (1280 X 1024@75Hz)
● Color display : 16,777,216 colors
● DPMS (Display Power Management Signaling)
● OSD (On Screen Display)
● Auto Configuration : Hot key
● DDC 1/2B : Plug & Play
According to PC system, DDC 1/2B may not be supported. If you meet Error
message,check your video card which compatibility with DDC. If you eant to know
Notice
more information, please contact our service center.
3
Precautions
Warning :
AC outlet
Plug the power cord into a properly
grounded outlet.
There is the risk of electric shock.
Do not overload an electrical outlet with
too many devices.
There is the risk of fire.
The following information will help you avoid the risk of electric shock, serious injury, and death.
Power cord
If you hear a noise or smell smoke from the
computer or adaptor, unplug the power cord
immediately, and call the service center.
There is the risk of electric shock or fire.
Do not unplug from the outlet by pulling
the power cord or when your hands are
wet.
There is the risk of electric shock and fire.
Do not bend the power cord excessively or place
heavy objects on it. Keep children and pets away
from the power cord as they may damage the power
cord. There is the risk of electric shock and fire.
4
Do not use a damaged power cord or
plug. Make sure the plug fits snugly into
the outlet.
There is the risk of electric shock or fire.
Do not expose the monitor to the direct
sun light.
Keep the monitor away from high temperature, humidity, and dust.
■Operating environment= 0 ~ 4 0degrees Celsius
■Operating environment=30~80relative humidity.
Do not block the fan louvers.
There is the risk of fire or damage to the
monitor.
Do not attempt to disassemble, fix, or modify
the monitor.
There is the risk of electric shock or fire.
Do not allow any object or liquid to enter
inside the monitor.
There is the risk of electric shock, fire,
or damage to the monitor.
5
Caution :
The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor.
Use a proper voltage/current level indicated
Do not scratch and damage the LCD
with sharp objects.
Do not clean the LCD with abrasive
chemicals.
There is the risk of damage to the LCD.
Keep the monitor away from objects
and electrical appliances that may generate electromagnetic fields.
Place the monitor on a flat, stable surface. The monitor may fall and there is
the risk of damage or injury
6
Unplug the power cord when the monitor is not in use for a prolonged period
of time.
Loading...