Woosim systems Porti-p User Manual

MODEL PORTI-P

WOOSIM SYSTEMS Inc.

#501, Daerung Technotown 3th, 448,

Gasan-Dong, GeumChun-Ku, Seoul,

Korea

Tel : +82-2-2107-3700

Fax : +82-2-2107-3707

URL: http://www.woosim.com

(2Inch Panel Printer) Rev. 5.0

All specifications are subjected to change without notice

http://www.woosim.com

Porti-P Rev. 5.0

All specifications are subjected to change without notice

¦ Copyright

PORTI-P 2Inch Panel Printer Operator’s Manual.

The information contained in this manual is the property of Woosim Systems Inc.

And may not be reproduced in whole or in part without the prior written permission of

Woosim System Inc.

¦ Trademark

a registered trademark of Woosim Systems Inc.

All other trademark are the properties of their respective companies.

¦ Caution

Some semiconductor devices are easily damaged by static electricity. You should

turn the printer “OFF”, before you connect or removed the cable on the rear side, in

order to guard the printer against the static electricity.

If the printer is damaged by the static electricity, you should turn the printer “OFF”

¦ Notice

The contents of this manual are subject to change without notice.

http://www.woosim.com

2012-05-21

Porti-P Rev. 5.0

¦ Introduction

The PORTI-P is an extremely simple and functional panel printer.

It is the ideal solution for applications which require the immediate printing of data on

a paper, whether they be of an industrial, professional or laboratory nature.

Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground

analyzer, Chemical analyzer, Metallic analyzer, etc.

The general features of PORTI-P printer are as follows:

u Ultra small size rack mount printer.

u Very silent printing thru direct thermal printing method.

u High speed(50mm/sec, MAX)

u High resolution(203dpi : 8dots/mm).

u UART(RS-232C or TTL), Parallel(Porti-PP40, PP60 Only) interface

u Support text and graphic printing.

u Easier paper loading by CLAMSHELL design.

u Easier maintenance with self-diagnostics.

u In field programming – Update Firmware, Download Fonts and Logos

u Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.

u Flow control : Software (XON/XOFF)

※ Hardware flow control not supported in printer.

u Agency Approvals

http://www.woosim.com

2012-05-21

¦ Operating Precautions

Please follow the precautions below to enjoy and maintain the full

performance of the printer.

u Using the Printer

● Be careful not to drop or bump the printer on a hard surface.

● Do not install the printer in direct sunlight or such areas.

Suitable environment for the use of the printer is as follows:

◆ Operating temperature :-10°C to 50°C

◆ Relative humidity : 10% to 90% (No condensation)

● Do not install the printer near devices that generate strong

electromagnetic fields such as a copy machine.

● Do not open the platen cover during printing .

● Do not remove or reinstall the communication cable during printing

or transmission.

● Do not touch the connectors of the communication during printing.

● Switch the POWER OFF when not in use.

● Do not use alcohol or other solvent.

u Thermal Paper Handling

● Store the thermal paper in a cool, dry and dark place.

● Do not rub the paper with hard object.

● Do not leave the paper with hard object.

● Do not allow plastic film, erasers, or adhesive tape to touch the paper

for long periods.

● Do not stack the thermal paper with diazo copies immediately

after copying or wet-type copies.

● Do not use chemical glue.

● Always use the clean thermal paper.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

¦ Note

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

These equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception , which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

Porti-P Rev. 5.0

CONTENTS

1. Outline ............................................................................................................................................7

1.1. Model classifications .................................................................................................................7

1.2. Product Part Number System.....................................................................................................8

1.3. Specifications ............................................................................................................................9

2. Setting up the printer ..................................................................................................................11

2.1. Printer & Accessories ..............................................................................................................11

2.2. Printer Features ........................................................................................................................12

2.2.1. Porti-P30............................................................................................................................12

2.2.2. Porti-P40 (include P240, PP40) .........................................................................................13

2.2.3. Porti-P60............................................................................................................................15

2.3. Installation ...............................................................................................................................16

2.3.1. Porti-P30............................................................................................................................16

2.3.2. Porti-P40 (include PP40) ...................................................................................................17

2.3.3. Porti-P240..........................................................................................................................18

2.3.4. Porti-P60............................................................................................................................19

2.4. Replacing the paper roll ...........................................................................................................20

2.5. Setting operation mode ............................................................................................................21

2.6. Power supply ...........................................................................................................................27

3. Interface ........................................................................................................................................28

3.1. Serial Interface (Porti-P30) ......................................................................................................28

3.2. Serial Interface (Porti-P40 /60, P240)......................................................................................29

3.3. Serial and Parallel Interface (Porti-PP40/60) ...........................................................................30

4. Using the printer ..........................................................................................................................33

4.1. Control panel ...........................................................................................................................33

4.2. The self test..............................................................................................................................33

5. Consumable Parts ........................................................................................................................34

5.1. Recommended paper ...............................................................................................................34

5.2 Printing position .......................................................................................................................34

6. Revision History ...........................................................................................................................35

http://www.woosim.com

2012-05-21

Porti-P Rev. 5.0

PORTI–P ( ) ( ) ( )

Model name

Interface

None : UART

P : Parallel

Size of roll paper

30 : 57mm wide, 30 Ø

40 : 57mm wide, 40 Ø

60 : 57mm wide, 60 Ø

Power

None : DC 9V

5V : DC 5V

12V : DC 12~24V

11.. OOuuttlliinnee

1.1. Model classifications

http://www.woosim.com

2012-05-21

Model name / Interface Spec.

Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1

2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1

Note) The above table is the interface format which is supported.

But some of the interfaces are not supported according to the product

and please contact us, if you have any questions regarding the interface.

S40

SC30

W25

Wired

Wireless

RS-232C

Bluetooth

TTL

IrDA

USB

None

RS-485

Parallel

None

1.2. Product Part Number System

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

Item

Specification

Printing method

Direct thermal line printing

Characters per line

42cpl (MAX)

Character size

Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]

Optional Characters

Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish, Greek, Japanese, Persian, Latin9 and Others upon request.

Resolution

203dpi, 8dots/mm

Print width

2-inch (48mm, 384dots)

Printing speed

50mm/sec (MAX)

Dimensions

(including PCB)

-P30 : 75 * 55 * 30.3 mm

-P40,P240 : 80 * 75 * 40 mm

-P60 : 76 * 93 * 62 mm

-PP40 : 80 * 75 * 55 mm

-PP60 : 76 * 93 * 62 mm

Weight

(including roll paper)

-P30 : 102.5g

-P40,P240 : 153g

-P60 : 274g

-PP40 : 164.5g

-PP60 : 285.5g

Interface

UART(RS-232C or TTL) (P30,P40,P240,P60,PP40, PP60)

Parallel (PP40, PP60 only)

Paper supplied

Thermal roll paper (57mm wide, 30ø 40ø, 60ø)

Barcode supplied

1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN,

KAN, JAN, CODABAR

2-dimension : PDF417, QR-Code, DATA Matrix

Driver

Microsoft Widows XP / VISTA / 7

Windows CE, Linux, Android OS driver compatible

Receive buffer size

10K bytes

Input Power

5VDC, Standby 60mA and Max 2.5A (P30, P40,P240)

9VDC, Standby 60mA and Max 3A (P30,P40,P240, P60)

12V~24VDC, Standby 60mA and Max 3A (PP40, PP60)

(Continue…)

1.3. Specifications

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

Porti-P Rev. 5.0

Item

Specification

Environment

conditions

Temperature

-10°C ~50°C (operating)

-10°C ~ 70°C (storage)

Humidity

30% - 80% (operating)

10% - 90% (storage)

MCBF (Mean Cycle

Between failure)

Mechanical

37,000,000 lines

Head

Approximately 50 Km

< Table 1 >

http://www.woosim.com

2012-05-21

Porti-P Rev. 5.0

When unpacking your printer box make sure it contains the printer and all accessories.

If any accessories are missing or damage, please contact your dealer for assistance.

Porti-P40,

PP40

Porti-P60,

PP60

Porti-P30

Porti-P240

Thermal roll paper

22.. SSeettttiinngg uupp tthhee pprriinntteerr

2.1. Printer & Accessories

http://www.woosim.com

2012-05-21

+ 24 hidden pages

Woosim systems Porti-p User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual