How it Works
Woosim System
Loading...
WSP R341
User Manual
27 pgs1.33 Mb0

Woosim System WSP R341 User Manual

MODEL WSP-R341
(3inch Mobile Printer)
Rev. 1.0
All specifications are subjected to change without notice
http://www.woosim.com
2
 Copyright
WSP-R341 3inch mobile printer operator’s manual.
Copyright ⓒ2015 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer OFF, before you connect or removed the cable on the rear side, in
order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer OFF.
 Notice
The contents of this manual are subject to change without notice.
WSP-R341 Rev. 1.0
http://www.woosim.com
3
 Introduction
The WSP-R341 is suitable designed for use with a growing variety of mobile
devices. Bluetooth/USB interfaces make the WSP-R341 the perfect comrade for
applications such as point of transaction warehousing, distribution, point of sales,
hospitality, gaming and healthcare.
The general features of WSP-R341 printer are as follows:
Pocket size (104.5 x 126.8 x 45.1mm)
Light weight (297.5g) for true mobility.
Very silent printing thru direct thermal printing method.
High speed(100mm/sec, MAX)
High resolution(203dpi : 8dots/mm)
USB, Bluetooth Ver3.0 interface
Intuitive LED’s indicate Power(on/off),Error, Bluetooth status, Battery status
Support Magnetic Stripe Reader [option].
Support text and graphic printing.
Easier paper loading by CLAMSHELL design.
One touch paper cover
Printer door open & Paper-out sensor
Easier maintenance with self-diagnostics.
In field programming – Update Firmware, Download Fonts and Logos
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible.
Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
Agency Approvals
WSP-R341 Rev. 1.0
http://www.woosim.com
4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance
of the printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
●
Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
●
Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
●
Do not open the platen cover during printing .
●
Do not remove or reinstall the communication cable during printing
or transmission.
●
Do not touch the connectors of the communication during printing.
●
Switch the POWER OFF when not in use.
● Do not use other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.
WSP-R341 Rev. 1.0
http://www.woosim.com
5
Federal Communications Commission
Radio Frequency Interference Statement
FCC ID : QDDWSP-R341
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
ㆍConsult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules.
This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition.
CE WARNING
ㆍChanges and modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
ㆍIt is desirable that it be installed and operated with at least 20cm or more between the radiator and
person’s body(excluding extremities hand, wrists, feet, and ankles)
WSP-R341 Rev. 1.0
http://www.woosim.com
6
WSP-R341 Rev. 1.0
CONTENTS
1. Outline ................................................................................................................................... 7
1.1. Model classifications .................................................................................................... 7
1.2 Symbol ............................................................................................................................ 7
1.3. Product Part Number System ...................................................................................... 8
1.4. Specifications. ................................................................................................................ 9
2. Setting up the printer ....................................................................................................... 11
2.1. Printer & Accessories .................................................................................................. 11
2.2. Printer Features ........................................................................................................... 12
2.3. Dimensions .................................................................................................................. 13
2.4. Replacing the paper roll ............................................................................................ 14
2.5. Power supply ............................................................................................................... 15
2.5.1. Internal power supply ....................................................................................... 15
2.5.2. Installing the Battery ......................................................................................... 15
2.5.3. Recharging the battery ..................................................................................... 16
2.6. Set operation mode ................................................................................................... 17
2.6.1. GAP/HOLE SENSOR SETTING ........................................................................... 19
2.7. Memory switch table .................................................................................................. 20
3. Interface ............................................................................................................................... 21
3.1. USB ............................................................................................................................... 21
3.2. Bluetooth ..................................................................................................................... 22
3.3. Read a magnetic stripe card ..................................................................................... 22
4. Using the printer ................................................................................................................ 23
4.1. Control panel............................................................................................................... 23
4.2. The self test ................................................................................................................. 24
4.3. Using the Belt clip ...................................................................................................... 25
5. Consumable Parts .............................................................................................................. 26
5.1. Recommended paper ................................................................................................. 26
5.2. Printing position ......................................................................................................... 26
6. Revision History ................................................................................................................. 27
http://www.woosim.com
7
WSP-R341 ( ) ( )
Model
Interface
C1 : USB/Bluetooth
Power
None : DC 8.4V
Standby symbol
IEC 5009, the standby symbol(line partially within a broken circle),
Indicates a sleep mode or low power state.
Direct current symbol
This symbol is found on many electronic devices that either require or produce direct
current.
WSP-R341 Rev. 1.0
11.. OOuuttlliinnee
11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss
11..22 SSyymmbbooll
http://www.woosim.com
8
Model name / Interface Spec.
Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None
WSP-R341 Rev. 1.0
11..33.. PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteemm
http://www.woosim.com
9
Item
Specification
Printing method
Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- Font A : 48cpl / Font B : 64cpl / Font C : 72cpl
- KOR, CHN, JPN : 24cpl
Character set
Alphanumeric:95, Extended Graphics:128X50 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
3-inch (72mm, 576dots)
Printing speed
100mm / sec (MAX)
Dimensions
104.5 x 126.8 x 45.1mm
104.5 x 130.5 x 45.1mm (MSR model)
Weight (w/o paper)
297.5g / 302.5g (MSR model)
Interface
USB, Bluetooth Ver3.0
Paper supplied
Thermal roll paper, Label roll (80mm wide, 40ø)
Barcode supplied
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible
H/W spec.
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Sensor
Support Cover open, Paper, Label
MSR (option)
Triple tracks (1&2&3 Tracks Reading)
*Supports 3DES & AES encryption
(Continue…)
WSP-R341 Rev. 1.0
11..44.. SSppeecciiffiiccaattiioonnss..
http://www.woosim.com
Loading...
+ 18 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use