Woosim System WSP MC350 User Manual

MODEL WSP-MC350

(3inch Mobile Printer)

Rev. 1.0

http://www.woosim.com

 Copyright

WSP-MC350 3inch mobile printer operator’s manual.

The information contained in this manual is the property of Woosim Systems Inc.

And may not be reproduced in whole or in part without the prior written permission of

Woosim Systems Inc.

 Trademark

a registered trademark of Woosim Systems Inc.

All other trademark are the properties of their respective companies.

 Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the printer

“OFF”, before you connect or removed the cable on the rear side, in order to guard the printer

against the static electricity.

If the printer is damaged by the static electricity, you should turn the printer “OFF”.

 Notice

The contents of this manual are subject to change without notice.

WSP-MC350 Rev. 1.0

http://www.woosim.com

 Introduction

The WSP-MC350 is the ideal solution for Mobile banking system , Retail,

point of sales, Credit card Transaction, other traveling and mobile computing etc.

The general features of WSP-MC350 printer are as follows:

 Compact size (114.1 X 143.0 X 55.4mm)

 Light weight (347g) for true mobility.

 Very silent printing thru direct thermal printing method.

 High speed(80mm/sec, MAX)

 High resolution(203dpi : 8dots/mm)

 USB, Bluetooth Ver3.0 Interface

 Intuitive LED’s indicate Power(on/off),Error, Bluetooth status, Battery status

 Support Magnetic Stripe Reader

 Support Smart Card Reader [option]

 Support text and graphic printing.

 Easier paper loading by CLAMSHELL design.

 One touch paper cover

 Printer door open & Paper-out sensor

 Easier maintenance with self-diagnostics.

 In field programming – Update Firmware, Download Fonts and Logos

 Microsoft Windows/Windows CE, Linux, Android, iOS compatible

 Flow control : Software (XON/XOFF)

※ Hardware flow control not supported in printer.

WSP-MC350 Rev. 1.0

http://www.woosim.com

 Operating Precautions

Please follow the precautions below to enjoy and maintain the full performance of the printer.

 Using the Printer

● Be careful not to drop or bump the printer on a hard surface.

● Do not install the printer in direct sunlight or such areas.

Suitable environment for the use of the printer is as follows:

◆ Operating temperature :-10°C to 50°C

◆ Relative humidity : 30% to 80%

● Do not install the printer near devices that generate strong electromagnetic fields such as a

copy machine.

● Do not open the platen cover during printing .

● Do not remove or reinstall the communication cable during printing or transmission.

● Do not touch the connectors of the communication during printing.

● Switch the POWER OFF when not in use.

● Do not use other solvent.

● The AC adapter, the battery charger and the battery pack may

become warm when in use. This is normal and is not a malfunction.

● When the battery pack is used at low temperature, the length of time the printer can be used

may be shortened.

 Thermal Paper Handling

● Store the thermal paper in a cool, dry and dark place.

● Do not rub the paper with hard object.

● Do not leave the paper with hard object.

● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.

● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies.

● Do not use chemical glue.

● Always use the clean thermal paper.

CE WARNING

ㆍChanges and modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

ㆍIt is desirable that it be installed and operated with at least 20cm or more between the radiator

and person’s body(excluding extremities hand, wrists, feet, and ankles)

WSP-MC350 Rev. 1.0

http://www.woosim.com

WSP-MC350 Rev. 1.0

CONTENTS

1. Outline.......................................................................................................................................................................... 7

1.1. Model classifications ......................................................................................................................................... 7

1.2 Symbol .................................................................................................................................................................. 7

1.3. Product Part Number System .......................................................................................................................... 8

1.4. Specifications. ..................................................................................................................................................... 9

2. Setting up the printer ............................................................................................................................................ 11

2.1. Printer & Accessories ...................................................................................................................................... 11

2.2. Printer Features ................................................................................................................................................ 12

2.3. Dimensions ....................................................................................................................................................... 13

2.4. Replacing the paper roll ................................................................................................................................. 14

2.5. Power supply .................................................................................................................................................... 15

2.5.1. Internal power supply............................................................................................................................ 15

2.5.2. Installing the Battery ............................................................................................................................. 15

2.5.3. Recharging the battery ......................................................................................................................... 16

2.6. Set operation mode ................................................................................................................................ ........ 17

2.6.1. GAP/HOLE SENSOR SETTING............................................................................................................... 19

2.7. Memory switch table ...................................................................................................................................... 20

2.7.1. USB Version ............................................................................................................................................. 20

3. Interface ..................................................................................................................................................................... 21

3.1. USB ..................................................................................................................................................................... 21

3.2. Bluetooth ........................................................................................................................................................... 21

3.3. Read a magnetic stripe card ......................................................................................................................... 22

3.4. Insert a IC Card ................................................................................................................................................ 22

4. Smart Card Module ................................................................................................................................................ 23

4.1. General Spec. .................................................................................................................................................... 23

4.2. Inserting the SAM card .................................................................................................................................. 23

4.3. Communication Protocol Sequence ............................................................................................................. 24

4.3.1. Regular Operation .................................................................................................................................. 24

4.3.2. Irregular Operation (Communication Error) ...................................................................................... 24

5. Using the printer ..................................................................................................................................................... 25

5.1. Control panel .................................................................................................................................................... 25

5.2. The self test ...................................................................................................................................................... 26

5.3. Using the Accessory ........................................................................................................................................ 27

5.3.1. Using the Shoulder strap ................................................................ ................................ ...................... 27

5.3.2. Using the Belt clip .................................................................................................................................. 27

6. Consumable Parts ................................................................................................................................................... 28

http://www.woosim.com

WSP-MC350 Rev. 1.0

6.1. Recommended paper...................................................................................................................................... 28

6.2. Printing position .............................................................................................................................................. 28

7. Revision History ...................................................................................................................................................... 29

http://www.woosim.com

WSP-MC350 Rev. 1.0

11.. OOuuttlliinnee

11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss

11..22 SSyymmbbooll

WSP-MC350 ( ) ( )

Model

Interface

C1 : USB/Bluetooth

Power

None : DC 8.4V

Standby symbol

IEC 5009, the standby symbol(line partially within a broken circle),

Indicates a sleep mode or low power state.

Direct current symbol

This symbol is found on many electronic devices that either require or produce

direct current.

http://www.woosim.com

WSP-MC350 Rev. 1.0

11..33.. PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteemm

Model name / Interface Spec.

Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒ S40/A1

2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1

Note) The above table is the interface format which is supported.

But some of the interfaces are not supported according to the product and please contact us, if you have any questions regarding the interface.

S40

SC30

W25

. .

Wired

Wireless

RS-232C

Bluetooth

TTL 2 IrDA

USB

None

RS-485

Parallel

None

http://www.woosim.com

WSP-MC350 Rev. 1.0

11..44.. SSppeecciiffiiccaattiioonnss..

Item

Specification

Printing method

Direct thermal line printing

Character size

- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16

- KOR : 24X24(16X24) / CHN, JPN : 24X24

Characters per line

- Font A : 48cpl / Font B : 64cpl / Font C : 72cpl

- KOR, CHN, JPN : 24cpl

Optional Characters

Alphanumeric:95, Extended Graphics:128X50 pages, International:10,

Simplified/Traditional Chinese, Japanese, Korean(optional)

Resolution

203dpi, 8dots/mm

Print width

3-inch (72mm, 576dots)

Printing speed

80mm / sec (MAX)

Dimensions

114.1 X 143.0 X 55.4mm

Weight (w/o paper)

347g

Interface

USB, Bluetooth Ver3.0 interface

Paper supplied

Thermal roll paper, Label roll (80mm wide, 50ø)

Barcode supplied

1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,

CODE-128, ITF, CODABAR

2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,

DATA Matrix, Maxicode

Etc :GS1 databar

Driver

Microsoft Windows, Linux

H/W spec.

MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit

Receive buffer size

1M bytes

Sensor

Support Cover open, Paper, Label, Gap

MSR

Triple tracks (1&2&3 Tracks Reading)

*Supports 3DES & AES encryption

Smart Card Module

[option]

ISO 7816 Compliant [EMV Level 1/2 Certified] /

T=0, T=1 support 1 SAM [Security Application module]

Paper cutting method

Guillotine

Type of paper cutting

Full cut and Partial cut

(Continue…)

http://www.woosim.com

+ 20 hidden pages

Woosim System WSP MC350 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual