Woosim System WSP I450X User Manual
MODEL WSP-i450
(4inch Rugged Mobile Printer)
Rev. 6.2
WOOSIM SYSTEMS Inc.
(#501, Daerung Technotown 3th)
115, Gasan digital 2-ro, Geumcheon-gu,
Seoul, 153-772 Rep. of KOREA
Tel : +82-2-2107-3700
Fax : +82-2-2107-3707
URL:
http://www.woosim.com
All specifications are subjected to change without notice
http://www.woosim.com
WSP-i450 Rev. 6.2
2
Copyright
WSP-i450 4inch Rugged mobile printer operator’s manual.
Copyright ⓒ2016 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer OFF, before you connect or removed the cable on the rear side,
in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer OFF
Notice
The contents of this manual are subject to change without notice.
http://www.woosim.com
3
Introduction
The WSP-i450 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile
computing etc.
The general features of WSP-i450 printer are as follows:
Compact size (150.9×136.4×63.3mm)
Light weight(596g) for true mobility
Very silent printing thru direct thermal printing method
High speed (110mm/sec, MAX)
High resolution(203dpi : 8dots/mm).
UART, Bluetooth Ver3.0,
Wireless LAN(IEEE802.11b/g/n) [option] interface
Support Graphic LCD(128×32dots) with Blue LED Backlight
Support Magnetic Stripe Reader [option]
Support Smart Card Module [option]
Support text and graphic printing
Intutive LED’s indicate Power(on/off), Error
Easier paper roll loading by CLAMSHELL design
One touch paper cover
Printer door open & Paper-out sensor
Easier maintenance with self-diagnostic.
In field programming – Update Firmware, Download Fonts and Logos
Water-resistant construction.( IP54 – Certified )
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible.
Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
Free fall: 1.8 meter
Agency Approvals
WSP-i450 Rev. 6.2
http://www.woosim.com
WSP-i450 Rev. 6.2
4
Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
●
Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
●
Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
●
Do not open the platen cover during printing .
●
Do not remove or reinstall the communication cable during printing
or transmission.
●
Do not touch the connectors of the communication during printing.
●
Switch the POWER OFF when not in use.
● Do not use other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.
http://www.woosim.com
WSP-i450 Rev. 6.2
5
Federal Communications Commission
Radio Frequency Interference Statement
FCC ID : QDDWSP-I450X
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
ㆍReorient or relocate the receiving antenna.
ㆍIncrease the separation between the equipment and receiver.
ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
ㆍConsult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to
operated the equipment under FCC rules.
This Device has been evaluated to comply with RF exposure requirement for general use limit in
portable condition. It is safe to be used in sold condition.
CE WARNING
ㆍChanges and modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
ㆍIt is desirable that it be installed and operated with at least 20cm or more between the radiator
and person’s body(excluding extremities hand, wrists, feet, and ankles)
This equipment contains specified radio equipment that has been certified to the Technical
Regulation Conformity Certification under the Radio Law.
当該機器には電波法に基く技術基準適合証 明等を受けた特定無線設備を装着しいる
http://www.woosim.com
WSP-i450 Rev. 6.2
6
CONTENTS
1. Outline. .................................................................................................................................. 8
1.1. Model classifications. .................................................................................................. 8
1.2 Symbol........................................................................................................................... 8
1.3 Product Part Number System ..................................................................................... 9
1.4. Specifications. ............................................................................................................ 10
2. Setting up the printer. ...................................................................................................... 12
2.1. Printer & Accessories ................................................................................................ 12
2.2. Printer Features ......................................................................................................... 13
2.3. Dimensions................................................................................................................. 14
2.4. Replacing paper roll. ................................................................................................. 16
2.5. Power supply ............................................................................................................. 17
2.5.1. Specified power supply .................................................................................. 17
2.5.2. Installing the SAM Card and the battery ..................................................... 17
2.5.3. Recharging the battery pack ......................................................................... 18
2.6. Set operation mode .................................................................................................. 19
2.6.1. GAP/HOLE SENSOR SETTING ........................................................................ 21
2.7. Confirmation of the Wireless-LAN information ..................................................... 24
2.7.1. MAC Address printing .................................................................................... 24
2.7.2. Confirmation of the Wireless-LAN setting information ............................. 24
3. Interface ............................................................................................................................... 25
3.1. UART ........................................................................................................................... 25
3.2. Bluetooth .................................................................................................................... 26
3.3. Wireless LAN .............................................................................................................. 26
3.4. Card Reading & Smart Card insert ......................................................................... 26
4. Smart Card Module ........................................................................................................... 27
4.1. General Spec. ............................................................................................................. 27
4.2. Communication Protocol Sequence ........................................................................ 28
4.2.1. Regular Operation .......................................................................................... 28
4.2.2. Irregular Operation (Communication Error) ................................................. 28
http://www.woosim.com
WSP-i450 Rev. 6.2
7
5. Using the printer ................................................................................................................ 29
5.1. Control panel. ............................................................................................................ 29
5.2. The self test ............................................................................................................... 30
5.3. Using the Accessory ................................................................................................. 30
5.3.1. Using the Shoulder strap ............................................................................... 30
5.3.2. Using the Belt clip .......................................................................................... 31
6. Consumable Parts. ............................................................................................................. 32
6.1. Recommended paper. ............................................................................................... 32
6.2. Printing position. ....................................................................................................... 32
http://www.woosim.com
WSP-i450 Rev. 6.2
8
WSP-i450 ( ) ( )
Model
Interface
A1 : UART/Bluetooth
(Standard)
Power
None : DC 8.4V
Standby symbol
IEC 5009, the standby symbol(line partially within a broken circle),
Indicates a sleep mode or low power state.
Direct current symbol
This symbol is found on many electronic devices that either require
or produce direct current.
11.. OOuuttlliinnee..
11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss..
11..22 SSyymmbbooll
http://www.woosim.com
9
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL 2 IrDA
C
USB
3
Wireless LAN
D
RS-485
0
None
E
Parallel
Z
None
11..33 PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteem
m
WSP-i450 Rev. 6.2
http://www.woosim.com
WSP-i450 Rev. 6.2
10
Item
Specifications
Print method
Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- Font A : 69cpl / Font B : 92cpl / Font C : 104cpl
- KOR, CHN, JPN : 34cpl
Optional Characters
Alphanumeric:95, Extended Graphics:128X50 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean(optional)
Resolution
203dpi, 8dots/mm
Print width
4-inch (104mm, 832dots)
Print speed
110mm / sec (MAX)
Dimension
150.9×136.4×63.3mm
150.9×143.2×63.3mm [MSR Model]
Weight
(w/o paper)
596g / 609g [MSR Model]
Interface
UART(RS-232C or TTL), Bluetooth Ver3.0,
USB[option], Wireless LAN(IEEE802.11b/g/n) [option]
Paper roll
Thermal roll paper (113mm wide, 50ø)
Barcodes
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible.
H/W Spec
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Sensor
Support Cover open, Paper, Label
( Continue… )
11..44.. SSppeecciiffiiccaattiioonnss..
http://www.woosim.com
Loading...