Woosim System WSP DT380 User Manual

Page 1

MODEL WSP-DT380

WOOSIM SYSTEMS Inc.

#501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com

(3inch POS Printer)

Rev. 4.0

All specifications are subjected to change without notice.

http://www.woosim.com

Page 2

 Copyright

WSP-DT380 3inch POS printer operator’s manual. Copyright ⓒ2012 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc.



Trademark

a registered trademark of Woosim Systems Inc.

All other trademark are the properties of their respective companies.

 Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF”

 Notice

The contents of this manual are subject to change without notice.

WSP-DT380 Rev. 4.0

http://www.woosim.com

Page 3

 Introduction

The WSP-DT380 is the ideal solution for POS system, kitchen printer, Electronic scale, Measuring equipment, Lottery etc.

The general features of WSP-DT380 printer are as follows:

 Very silent printing thru direct thermal printing method  High speed(170mm/sec, MAX)  USB, Bluetooth(Ver 2.1 + EDR) interface  Auto cutting  Support text and graphic printing  Support Magnetic Stripe Reader  Intuitive LED’s indicate Power(on/off), Error  Easier maintenance with self-diagnostics  Easier paper loading by CLAMSHELL design.  One touch paper cover  In field programming – Update Firmware, Download Fonts and Logos  Microsoft Windows XP / VISTA / 7 / 8 / CE / Linux / Android compatible.  Flow control : Software (XON/XOFF)

※ Hardware flow control not supported in printer

WSP-DT380 Rev. 4.0

http://www.woosim.com

Page 4

 Using the Printer

● Be careful not to drop or bump the printer on a hard surface.

● Do not install the printer in direct sunlight or such areas.

Suitable environment for the use of the printer is as follows:

◆ Operating temperature :-10°C to 50°C

◆ Relative humidity : 30% to 85%

● Do not install the printer near devices that generate strong

electromagnetic fields such as a copy machine.

● Do not open the platen cover during printing .

● Do not remove or reinstall the communication cable during printing

or transmission.

● Do not touch the connectors of the communication during printing.

● Switch the POWER OFF when not in use.

● Do not use alcohol or other solvent.

● When the battery pack is used at low temperature, the length of time

the printer can be used may be shortened.

 Thermal Paper Handling

● Store the thermal paper in a cool, dry and dark place.

● Do not rub the paper with hard object.

● Do not leave the paper with hard object.

● Do not allow plastic film, erasers, or adhesive tape to touch the paper

for long periods.

● Do not stack the thermal paper with diazo copies immediately

after copying or wet-type copies.

● Do not use chemical glue.

● Always use the clean thermal paper.

WSP-DT380 Rev. 4.0

http://www.woosim.com

Page 5

WSP-DT380 Rev. 4.0

FCC ID : QDDWSP-DT380

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected. ㆍConsult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules.

This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition.

http://www.woosim.com

Page 6

WSP-DT380 Rev. 4.0

CONTENTS

1. Outline. .........................................................................................................................................7

1.1. Model classifications. ...........................................................................................................7

1.2. Product Part Number System .............................................................................................7

1.3. Specifications. ........................................................................................................................8

2. Setting up the printer. ............................................................................................................ 10

2.1. Printer & Accessories ......................................................................................................... 10

2.2. Printer Features ................................................................................................................... 11

2.3. Replacing paper roll. ........................................................................................................... 13

2.4. Power supply ........................................................................................................................ 14

2.4.1. Specified power supply. .............................................................................................. 14

2.5. Setting the DIP switches .................................................................................................... 14

3. Interface ................................ ................................ ................................ ................................ ...... 16

3.1. USB ........................................................................................................................................ 17

3.2. Bluetooth .............................................................................................................................. 18

3.3. Card Reading ....................................................................................................................... 19

4. Using the printer. ..................................................................................................................... 20

4.1. Control panel. ...................................................................................................................... 20

4.2. The self test. ......................................................................................................................... 21

5. Consumable Parts .................................................................................................................... 22

5.1. Recommended paper ......................................................................................................... 22

5.2. Printing position. ................................................................................................................. 22

http://www.woosim.com

Page 7

WSP-DT380 Rev. 4.0

11.. OOuuttlliinnee..

11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss..

11..22.. PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteemm

WSP–DT380 ( ) ( )

Model

Interface

A0 : UART

Power

None : DC 24V/2.7A

Model name / Interface Spec.

Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1

2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1

S40

SC30

W25

. . .

Wired

Wireless

RS-232C

Bluetooth

TTL 2 IrDA

USB

None

RS-485

Parallel Z None

http://www.woosim.com

Page 8

WSP-DT380 Rev. 4.0

11..33.. SSppeecciiffiiccaattiioonnss..

Item

Specifications

Printing method

Thermal dot line printing

Characters per line

64cpl (MAX)

Character size

Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]

Optional Characters

Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Turkish, Greek, Japanese, Persian, Latin9 and Others upon request.

Resolution

W 8dots/mm X H 8 dots/mm

Paper feed pitch

0.0625mm

Print width

3-inch (72mm, 576dots)

Printing speed

170mm / sec (MAX)

Dimensions

126 * 165.5 * 108.2 mm

Weight

801g

Interface

USB, Bluetooth Ver2.1 + EDR

Paper supplied

Thermal roll paper (80mm wide, 80ø)

Barcode supplied

1-dimension : Code128, EAN 128, Code39, I2/5, Code93

UPC, EAN, KAN,JAN, CODABAR

2-dimension : PDF417, QR Code, DATA Matrix

Driver

Microsoft Widows XP / VISTA / 7 / 8 / Windows CE, Linux, Android OS driver compatible

H/W Spec.

MCU : 32bit RISC, FLASH : 4 Mbytes, RAM : 8 Mbytes

Receive buffer size

1M bytes

MSR

ISO 7810 / 7811 / 7812 Triple tracks(1&2&3) Reading

Paper cutting method

Slide cutting

Type of paper cutting

Full cut and Partial cut (1.5±0.5mm tab left at the center)

AC adapter

Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A

http://www.woosim.com

Page 9

WSP-DT380 Rev. 4.0

Item

Specifications

Environment

conditions

Temperature

-10°C ~ 50°C (operating)

-20°C ~ 60°C (storage)

Humidity

30% - 85% (operating)

Life span

(at 25℃ and rated

energy)

Activation pulse resistance

100 million pulses or more

Abrasion resistance

100km or more (excluding damage caused by dust and foreign materials)

Paper cutting resistance

700,000 cuts or more

http://www.woosim.com

Page 10

WSP-DT380 Rev. 4.0

22.. SSeettttiinngg uupp tthhee pprriinntteerr..

22..11.. PPrriinntteerr && AAcccceessssoorriieess

Your printer box should include these items. If any items are damaged or

missing, please contact your dealer for assistance.

WSP-DT380

Thermal roll paper

AC Adapter

http://www.woosim.com

Page 11

WSP-DT380 Rev. 4.0

22..22.. PPrriinntteerr FFeeaattuurreess

▶ Part Name

http://www.woosim.com

Page 12

▶ Dimensions

WSP-DT380 Rev. 4.0

http://www.woosim.com

Page 13

WSP-DT380 Rev. 4.0

22..33.. RReeppllaacciinngg ppaappeerr rroollll..

1. Make sure that the printer is not receiving data; otherwise, data may be lost.

2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow

direction like the picture.

3. Insert a new paper roll as shown.

4. Tear the excess paper off using the edge of paper door as a tear bar.

Note : Be sure to use paper rolls that meet the specifications.

Do not use paper rolls that have the paper glued to the core because the

printer can not detect the paper end correctly.

http://www.woosim.com

Page 14

WSP-DT380 Rev. 4.0

22..44.. PPoowweerr ssuuppppllyy

22..44..11.. SSppeecciiffiieedd ppoowweerr ssuuppppllyy..

22..55.. SSeettttiinngg tthhee DDIIPP sswwiittcchheess

The following specification is requested for Power supply.

Input : Rated Voltage : AC 100-240V, 50-60Hz

Capable of Supplying : +24VDC at 2.7A

Avoid using power supply which its power capacity of power current is extremely high.

The DIP switches are located on the bottom of the printer. The DIP switches

are used to set the printer to perform various functions. Follow these steps

when changing DIP switches setting :

1. Turn the printer power switch off.

2. Turn the printer over and remove the DIP switch cover.

3. Move the DIP switches using tweezers or another narrow-ended tool.

4. The new setting takes effect when you turn on the printer.

http://www.woosim.com

Page 15

WSP-DT380 Rev. 4.0

DIP SWITCH No.

1 2 Off

Off

Density High

Off

Density Medium

Off

Density High

Density Low

3 4 5 Off

Off

1000000 Baud Rate

Off

500000 Baud Rate

Off

230400 Baud Rate

Off

115200 Baud Rate

Off

57600 Baud Rate

Off

38400 Baud Rate

Off

19200 Baud Rate

9600 Baud Rate

6 Off

8 Data Bit

7 Data Bit

7 8 Off

Off

Odd Parity, 1 Stop Bit

Off

Even Parity, 1Stop Bit

Off

Odd Parity, 1 Stop Bit

No Parity, 1 Stop Bit

NOTE : Always change DIP switch settings when the printer is turned off.

Changes made with the power on have no effect until you turn the printer

off and then on again.

http://www.woosim.com

Page 16

WSP-DT380 Rev. 4.0

33.. IInntteerrffaaccee

WARNING

A wrong connection of power supply connector could be damage the printer.

In the printer power off state Please connect the power supply.

http://www.woosim.com

Page 17

WSP-DT380 Rev. 4.0

33..11.. UUSSBB

USB

Pin No.

Signal Name

Function

USB_VCC

+5V

DATA ‘-’

DATA ‘+’

GND

Ground

< USB (B TYPE)>

Drawer Kick-out

Pin No.

Signal Name

Direction

Frame GND

Drawer Kick-out driver signal 1

Output

Drawer open/close signal

Input 4 +12V

Drawer kick-out drive signal 2

Output

Signal GND

< MODULAR JACK - DK623PCB6P>

http://www.woosim.com

Page 18

WSP-DT380 Rev. 4.0

33..22.. BBlluueettooootthh