WOOSIM PORTI-P Operator's Manual

http://www.woosim.com

MODEL PORTI-P

WOOSIM SYSTEMS Inc.

#501, Daerung Technotown 3th, 448,

Gasan-Dong, GeumChun-Ku, Seoul,

Korea

Tel : [phone]

Fax : [phone]

URL: http://www.woosim.com

(2Inch Panel Printer)
Rev. 5.0

All specifications are subjected to change without notice

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

2

All specifications are subjected to change without notice

¦ Copyright

PORTI-P 2Inch Panel Printer Operator’s Manual.

Copyright ⓒ2012 by Woosim Systems Inc.

All rights reserved.

The information contained in this manual is the property of Woosim Systems Inc.

And may not be reproduced in whole or in part without the prior written permission of

Woosim System Inc.

¦ Trademark

a registered trademark of Woosim Systems Inc.

All other trademark are the properties of their respective companies.

¦ Caution

Some semiconductor devices are easily damaged by static electricity. You should

turn the printer “OFF”, before you connect or removed the cable on the rear side, in

order to guard the printer against the static electricity.

If the printer is damaged by the static electricity, you should turn the printer “OFF”

¦ Notice

The contents of this manual are subject to change without notice.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

3

¦ Introduction

The PORTI-P is an extremely simple and functional panel printer.

It is the ideal solution for applications which require the immediate printing of data on

a paper, whether they be of an industrial, professional or laboratory nature.

Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground

analyzer, Chemical analyzer, Metallic analyzer, etc.

The general features of PORTI-P printer are as follows:

u Ultra small size rack mount printer.

u Very silent printing thru direct thermal printing method.

u High speed(50mm/sec, MAX)

u High resolution(203dpi : 8dots/mm).

u UART(RS-232C or TTL), Parallel(Porti-PP40, PP60 Only) interface

u Support text and graphic printing.

u Easier paper loading by CLAMSHELL design.

u Easier maintenance with self-diagnostics.

u In field programming – Update Firmware, Download Fonts and Logos

u Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.

u Flow control : Software (XON/XOFF)

※ Hardware flow control not supported in printer.

u Agency Approvals

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

4

¦ Operating Precautions

Please follow the precautions below to enjoy and maintain the full

performance of the printer.

u Using the Printer

● Be careful not to drop or bump the printer on a hard surface.

● Do not install the printer in direct sunlight or such areas.

Suitable environment for the use of the printer is as follows:

◆ Operating temperature :-10°C to 50°C

◆ Relative humidity : 10% to 90% (No condensation)

● Do not install the printer near devices that generate strong

electromagnetic fields such as a copy machine.

● Do not open the platen cover during printing .

● Do not remove or reinstall the communication cable during printing

or transmission.

● Do not touch the connectors of the communication during printing.

● Switch the POWER OFF when not in use.

● Do not use alcohol or other solvent.

u Thermal Paper Handling

● Store the thermal paper in a cool, dry and dark place.

● Do not rub the paper with hard object.

● Do not leave the paper with hard object.

● Do not allow plastic film, erasers, or adhesive tape to touch the paper

for long periods.

● Do not stack the thermal paper with diazo copies immediately

after copying or wet-type copies.

● Do not use chemical glue.

● Always use the clean thermal paper.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

5

¦ Note

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

These equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception , which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

6

CONTENTS

1. Outline ............................................................................................................................................7

1.1. Model classifications .................................................................................................................7

1.2. Product Part Number System.....................................................................................................8

1.3. Specifications ............................................................................................................................9

2. Setting up the printer ..................................................................................................................11

2.1. Printer & Accessories ..............................................................................................................11

2.2. Printer Features ........................................................................................................................12

2.2.1. Porti-P30............................................................................................................................12

2.2.2. Porti-P40 (include P240, PP40) .........................................................................................13

2.2.3. Porti-P60............................................................................................................................15

2.3. Installation ...............................................................................................................................16

2.3.1. Porti-P30............................................................................................................................16

2.3.2. Porti-P40 (include PP40) ...................................................................................................17

2.3.3. Porti-P240..........................................................................................................................18

2.3.4. Porti-P60............................................................................................................................19

2.4. Replacing the paper roll ...........................................................................................................20

2.5. Setting operation mode ............................................................................................................21

2.6. Power supply ...........................................................................................................................27

3. Interface ........................................................................................................................................28

3.1. Serial Interface (Porti-P30) ......................................................................................................28

3.2. Serial Interface (Porti-P40 /60, P240)......................................................................................29

3.3. Serial and Parallel Interface (Porti-PP40/60) ...........................................................................30

4. Using the printer ..........................................................................................................................33

4.1. Control panel ...........................................................................................................................33

4.2. The self test..............................................................................................................................33

5. Consumable Parts ........................................................................................................................34

5.1. Recommended paper ...............................................................................................................34

5.2 Printing position .......................................................................................................................34

6. Revision History ...........................................................................................................................35

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

7

11.. OOuuttlliinnee

1.1. Model classifications

PORTI–P ( ) ( ) ( )

Model name

Interface

None : UART

P : Parallel

Size of roll paper

30 : 57mm wide, 30 Ø

40 : 57mm wide, 40 Ø

60 : 57mm wide, 60 Ø

Power

None : DC 9V

5V : DC 5V

12V : DC 12~24V

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

8

1.2. Product Part Number System

Model name / Interface Spec.

Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1

2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1

Note) The above table is the interface format which is supported.

But some of the interfaces are not supported according to the product

and please contact us, if you have any questions regarding the interface.

S40

SC30

W25

.

.

.

Wired

Wireless

A

RS-232C

1

Bluetooth

B

TTL

2

IrDA

C

USB

0

None

D

RS-485

E

Parallel

Z

None

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

9

1.3. Specifications

Item

Specification

Printing method

Direct thermal line printing

Characters per line

42cpl (MAX)

Character size

Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]

Optional Characters

Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.

Resolution

203dpi, 8dots/mm

Print width

2-inch (48mm, 384dots)

Printing speed

50mm/sec (MAX)

Dimensions

(including PCB)

-P30 : 75 * 55 * 30.3 mm

-P40,P240 : 80 * 75 * 40 mm

-P60 : 76 * 93 * 62 mm

-PP40 : 80 * 75 * 55 mm

-PP60 : 76 * 93 * 62 mm

Weight

(including roll paper)

-P30 : 102.5g

-P40,P240 : 153g

-P60 : 274g

-PP40 : 164.5g

-PP60 : 285.5g

Interface

UART(RS-232C or TTL) (P30,P40,P240,P60,PP40, PP60)

Parallel (PP40, PP60 only)

Paper supplied

Thermal roll paper (57mm wide, 30ø 40ø, 60ø)

Barcode supplied

1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN,

KAN, JAN, CODABAR

2-dimension : PDF417, QR-Code, DATA Matrix

Driver

Microsoft Widows XP / VISTA / 7

Windows CE, Linux, Android OS driver compatible

Receive buffer size

10K bytes

Input Power

5VDC, Standby 60mA and Max 2.5A (P30, P40,P240)

9VDC, Standby 60mA and Max 3A (P30,P40,P240, P60)

12V~24VDC, Standby 60mA and Max 3A (PP40, PP60)

(Continue…)

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

10

Item

Specification

Environment

conditions

Temperature

-10°C ~50°C (operating)

-10°C ~ 70°C (storage)

Humidity

30% - 80% (operating)

10% - 90% (storage)

MCBF (Mean Cycle

Between failure)

Mechanical

37,000,000 lines

Head

Approximately 50 Km

< Table 1 >

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

11

22.. SSeettttiinngg uupp tthhee pprriinntteerr

2.1. Printer & Accessories

When unpacking your printer box make sure it contains the printer and all accessories.

If any accessories are missing or damage, please contact your dealer for assistance.

Porti-P40,

PP40

Porti-P60,

PP60

Porti-P30

Porti-P240

Thermal roll paper

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

12

2.2. Printer Features

22..22..11.. PPoorrttii--PP3300

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

13

22..22..22.. PPoorrttii--PP4400 ((iinncclluuddee PP224400,, PPPP4400))

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

14

** P240 Dimensions [unit : mm]

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

15

22..22..33.. PPoorrttii--PP6600

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

16

2.3. Installation

22..33..11.. PPoorrttii--PP3300

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

17

22..33..22.. PPoorrttii--PP4400 ((iinncclluuddee PPPP4400))

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

18

22..33..33.. PPoorrttii--PP224400

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

19

22..33..44.. PPoorrttii--PP6600

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

20

2.4. Replacing the paper roll

1. Make sure that the printer is not receiving data; otherwise, data may be lost.

2. Open the paper cover using finger on both side of printer, and remove the remaining

paper.

3. Insert the paper roll as shown.

4. Tear the excess paper off using the edge of paper door as a tear bar.

Note : Be sure to use paper rolls that meet the specifications.

Do not use paper rolls that have the paper glued to the core because the

printer can not detect the paper end correctly.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

21

2.5. Setting operation mode

< M37702 (OLD) Version >

Change the mode and option using the MODE Code.

l MODE button : use for changing OPTION status. (Error Lamp)

l FEED button : use for changing MODE status. (Power Lamp)

[Example] The defaults of the printer are :

RS-232C / 9600 bps / 8 data bit / No parity / Density low / Mark use / Sensor low

If a user wants to modify the defaults with

PARALLEL / 57600 bps / 7 data bit / Odd parity / Density high / Mark no use

/ Sensor Medium1

u Press MODE Button during the Error Lamp flicking 5 times.

® You will see the Power Lamp and the Error Lamp flickers once.

® Press the MODE Button twice and the Error Lamp flickers 3 times.

And then, interface mode has set to PARALLEL mode.

u When you press FEED button once again, Power Lamp flickers twice and

the Error Lamp flickers 4 times.

® Press MODE Button 3 times, Error Lamp flickers 7 times.

And then, baudrate has set to 57,600 bps.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

22

u When you press FEED Button once again, Power Lamp flickers 3 times

and the Error Lamp flickers twice.

® Press MODE Button once, Error Lamp flickers once.

And then Data Bit has set to 7 data bit.

u When you press FEED Button once again, Power Lamp flickers 4 times

and the Error Lamp flickers once.

® Press MODE Button twice, Error Lamp flickers 3 times.

And then the Parity bit has set to Odd parity bit.

u When you press FEED Button once again, Power Lamp flickers 5 times

and Error Lamp flickers once.

® Press MODE Button twice, Error Lamp flickers 3 times.

And then the density has set to Density high.

u When you press FEED Button twice, Power Lamp flickers 7 times

and Error Lamp flickers twice.

® Press MODE Button once, Error Lamp flickers twice.

And then the mark has set to Marm no use.

u When you press FEED Button once again, Power Lamp flickers 8 times

and Error Lamp flickers once.

® Press MODE Button once, Error Lamp flickers twice.

And then the sensor has set to Sensor medium1.

If all the mode have set, press the MODE Button and the FEED Button at the same time

after then release the buttons at the same time.

The printer will print out the mode status which has modified.

( PARALLEL / 57,600 baud / 7 data bit / Odd parity / Density high / Mark no use

/ Sensor medium1 )

If the status is not correct, please try it again according to the procedure.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

23

* M37702 ( OLD ) Version

MODE

POWER Lamp

(Green)

ERROR Lamp

(Red)

Option

Communication

Port

1

1

RS-232C

2

PARALLEL

3

PARALLEL

Baud Rate

2

1

1200 bps

2

2400 bps

3

4800 bps

4

9600 bps

5

19200 bps

6

38400 bps

7

57600 bps

8

115200 bps

Data Bit

3

1

7 Data bit

2

8 Data bit

Parity Bit

4

1

No Parity

2

Even Parity

3

Odd Parity

Density

5

1

Density Low

2

Density Medium

3

Density High

Protocol

6

1

Default Protocol

2

Lotte Protocol

Mark

7

1

No use

2

Use

Sensor

8

1

Low

2

Medium1

3

Medium2

4

High

< Table 2 >

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

24

< M16C, ARM ( NEW ) Version >

Change the mode and option using the MODE Code.

l MODE button : use for changing OPTION status. (Error Lamp)

l FEED button : use for changing MODE status. (Power Lamp)

[Example] The defaults of the printer are :

UART / 9600 bps / 8 data bit / No parity / 1 stop bit / Density low

/ Mark use / Sensor low

If a user wants to modify the defaults with

Protocol UART / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high

/ Mark no use / Sensor medium1

u Press MODE Button during the Error Lamp flicking 5 times.

® You will see the Power Lamp and the Error Lamp flickers once.

® Press the MODE Button once and the Error Lamp flickers twice.

And then, interface mode has set to Protocol UART mode.

u When you press FEED button once again, Power Lamp flickers twice and

the Error Lamp flickers once.

® Press MODE Button 3 times, Error Lamp flickers 4 times.

And then, baudrate has set to 57,600 bps.

u When you press FEED Button once again, Power Lamp flickers 3 times

and the Error Lamp flickers twice.

® Press MODE Button once, Error Lamp flickers once.

And then Data Bit has set to 7 data bit.

u When you press FEED Button once again, Power Lamp flickers 4 times

and the Error Lamp flickers once.

® Press MODE Button once, Error Lamp flickers twice.

And then the Parity bit has set to Odd parity bit.

u When you press FEED Button once again, Power Lamp flickers 5 times

and Error Lamp flickers once.

® Press MODE Button once, Error Lamp flickers twice.

And then the density has set to 2 stop bit.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

25

u When you press FEED Button once again, Power Lamp flickers 6 times

and Error Lamp flickers once.

® Press MODE Button twice, Error Lamp flickers 3 times.

And then the density has set to Density high.

u When you press FEED Button once again, Power Lamp flickers 7 times

and Error Lamp flickers twice.

® Press MODE Button once, Error Lamp flickers once

And then the mark has set to Mark no use.

u When you press FEED Button once again, Power Lamp flickers 8 times

and Error Lamp flickers once.

® Press MODE Button once, Error Lamp flickers twice

And then the sensor has set to Sensor medium1.

If all the mode have set, press the MODE Button and the FEED Button at the same time

after then release the buttons at the same time.

The printer will print out the mode status which has modified.

(Protocol UART / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high /

Mark no use / Sensor medium1 / Power down no use)

If the status is not correct, please try it again according to the procedure.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

26

* M16C , ARM ( NEW ) Version

MODE

POWER Lamp

(Green)

ERROR Lamp

(Red)

Option

Communication

Port

1
1

UART(RS-232C)

2

Protocol UART(RS-232C)

Baud Rate

2

1

9600 bps

2

19200 bps

3

38400 bps

4

57600 bps

5

115200 bps

Data Bit

3
1

7 Data bit

2

8 Data bit

Parity

4

1

No Parity

2

Odd Parity

3

Even Parity

Stop bit

5
1

1 stop bit

2

2 stop bit

Density

6

1

Density Low

2

Density Medium

3

Density High

Mark

7
1

No use

2

Use

Sensor

8

1

Low

2

Medium1

3

Medium2

4

High

< Table 3 >

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

27

2.6. Power supply

The following specifications are requested for Power supply.

INPUT POWER:

1. Porti-P30,P40, P240 : DC 5V / Max 2.5A

2. Porti-P30, P40,P240, P60 : DC 9V / Max 3A

3. Porti-PP40,PP60 : DC 12~24V / Max 3A

Avoid using power supply which its power capacity of power current is extremely high.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

28

33.. IInntteerrffaaccee

3.1. Serial Interface (Porti-P30)

The Porti-P30 printer has a UART(RS-232C or TTL) interface and power

connector is connected by 6 pin female connector.

In the following table, the signals present on the connector are listed:

Pin no.

Signal name

Direction

Function

6

INPUT

-

5V/2.5A or 9V/3A

5

TxD

Output

Transmit Data

4

RxD

Input

Receive Data

3

N.C - -

2

N.C - -

1

GND - Ground

<J4 : MOLEX (5267-06P)>

Applicable connector : MOLEX 5264-06P or equivalent.

WARNING

A wrong connection of power supply connector could be damage the printer.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

29

3.2. Serial Interface (Porti-P40 /60, P240)

The Porti-P40/P60(P240) printer has a UART (RS-232C or TTL) serial

interface and power connector is connected by 6 pin female connector.

In the following table, the signals present on the connector are listed:

Applicable connector : MOLEX 5264-06P or equivalent.

Pin no.

Signal name

Direction

Function

6

INPUT

-

5V/2.5A or 9V/3A

5

TxD

Output

Transmit Data

4

RxD

Input

Receive Data

3

N.C

-

-

2

N.C

-

-

1

GND - Ground

<J1 : MOLEX (5267-06P)>

WARNING

A wrong connection of power supply connector could be damage the printer.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

30

3.3. Serial and Parallel Interface (Porti-PP40/60)

The Porti-PP40/60 printer has Parallel and UART (RS-232C or TTL) interface.

They are connected by 5 pin female and 15 pin female connector.

In the following table, the signals present on the connector are listed:

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

31

n Parallel

PIN No.

Signal

etc

1

STB

2

DATA BIT 0

3

DATA BIT 1

4

DATA BIT 2

5

DATA BIT 3

6

DATA BIT 4

7

DATA BIT 5

8

DATA BIT 6

9

DATA BIT 7

10

ACK

11

BUSY

12

P/E

13

ERR

14

INIT

15

GROUND

<J5 : MOLEX (53014-15P)>

Applicable connector : MOLEX 51004-15P or equivalent.

n Serial

Pin No.

Signal

etc

5

GND

4

N.C

3

N.C

2

RXD

1

TXD

<J2 : MOLEX (53014-05P)>

Applicable connector : MOLEX 51004-05P or equivalent.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

32

n Power

Pin #.

Signal

etc

1

GND

2

Vpp (12V~24V/3A)

<J6 : MOLEX (5267-02P)>

Applicable connector : MOLEX 5264-02P or equivalent.

WARNING

A wrong connection of power supply connector could be damage the printer.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

33

44.. UUssiinngg tthhee pprriinntteerr

4.1. Control panel

4.2. The self test

u Button

- FEED : When the printer is on, paper can be feed manually by pressing and

holding the FEED button for more than one second.

u Panel Lamp

- POWER(Green) : Printer is ON and ready to receive data.

- ERROR (Red) : Indicates a fault condition or a printer error.

(i.e : no paper, paper cover opened. etc.)

The self test procedure will check most of the printer functions. For self test, turn on

the power while holding down the FEED Button. The Self-Test checks the

following :

1) Make sure paper roll has been installed properly.

2) The Self-Test prints the current printer status, which provides the control

ROM version and the communication method setting.

3) After printing the current printer status, Self-Test will print a pattern using

the built-in character set.

4) The Self-Test automatically ends.

The printer is ready to receive data as soon as it completed the self test.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

34

55.. CCoonnssuummaabbllee PPaarrttss

5.1. Recommended paper

5.2 Printing position

Type : Thermal Paper

Paper width : 57mm

Paper thickness : 60±5㎛

Outer diameter : Ø30mm(P40) or Ø40mm(P40,P240,PP40) or Ø60mm(P60,PP60)

Recording side : Outside of roll

Cautions

1. Do not paste the paper to the core. And the roll paper which has

near end mark printing on its near end is recommended.

2. Chemicals or oil may change the color of paper, or printed characters may fade.

3. Change of paper color starts from approx . 70℃.

Pay attention to heat, humidity and sun light.

4. Color of paper may be changed by being scratched by nail or hard metal, etc.

Porti-P Rev. 5.0

http://www.woosim.com

2012-05-21

35

66.. RReevviissiioonn HHiissttoorryy

Date

Version

Comments

May. 21. 2012

5.0

p30 : Parallel pin spec. modify