Woodstock W1800 User Manual

Model W1800

Spray Gun Holder

Instruction Sheet

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

Introduction

Your new Model W1800 Spray Gun Holder (Figure 1) is designed to hold a spray gun and a paint filter

Inventory (Figure 1) Qty

A. Spray Gun Holder Base ...................................1

B. Filter Holder ................................................1

FIRE HAZARD! Mount the spray gun holder in a location away from potential ignition sources. Many paints and liquids are flammable. Ignoring this warning may lead to serious personal injury.

Workbench Mounting

Attach the spray gun holder base to a workbench using two #12 tap screws (not included).

Note: Consider mounting the base to the front of a work bench with the rings facing out for convenience. This also ensures that a spray gun equipped with a pressure gauge or adapter will not hit the bench when mounted on the holder, as shown in Figure

Wall Mounting

Mount the spray gun holder base to a wall with drywall anchors or fasten it to a board attached to studs using #12 tap screws.

Figure 1. Model W1800 inventory.

Holder

Filter

Base

Mounting

Holes

Figure 2. Model W1800 setup to filter

paint.

Holder Assembly & Operation

1. Assemble the base and holder, then position the spray

gun and filter (not included), as shown in

2. Pour paint into the filter; it should flow into the feed

cup.

WARN ING : NO POR TION OF TH IS M ANU AL M AY BE R EPR ODU CED IN ANY SHA PE O R FO RM WITHOUT

THE W RIT TEN APP ROVAL OF W OOD STO CK I NTERNATIONA L, I NC.

Figure 2.

Prin ted in C hin a#957 3BL