Woodstock W1730 User Manual
MODEL W1730
SHOP FOX® OSC. EDGE SANDER
Product Dimensions
Weight.......................................................................................................... 396 lbs.
Width (side-to-side) x Depth (front-to-back) x Height................................... 50-1/2 x 23 x 49 in.
Footprint (Length x Width).................................................................... 22-1/2 x 19-1/2 in.
Shipping Dimensions
Type....................................................................................................... Wood Crate
Content........................................................................................................ Machine
Weight.......................................................................................................... 443 lbs.
Length x Width x Height........................................................................... 30 x 48 x 42 in.
Electrical
Power Requirement.................................................................... 240V, Single-Phase, 60 Hz
Prewired Voltage................................................................................................. 240V
Full-Load Current Rating........................................................................................... 9A
Minimum Circuit Size............................................................................................. 15A
Connection Type......................................................................................... Cord & Plug
Power Cord Included.............................................................................................. Yes
Power Cord Length.............................................................................................. 10 ft.
Power Cord Gauge............................................................................................ 14 AWG
Plug Included....................................................................................................... Yes
Included Plug Type............................................................................................... 6-15
Switch Type............................................................ Magnetic Switch w/Overload Protection
Motors
Main
Type......................................................................... TEFC Capacitor-Start Induction
Horsepower................................................................................................. 2 HP
Phase.............................................................................................. Single-Phase
Amps........................................................................................................... 9A
Speed.................................................................................................. 1792 RPM
Power Transfer ................................................................................... Direct Drive
Bearings............................................................... Shielded & Permanently Lubricated
Main Specifications
Operation Information
Sanding Belt Speed.................................................................................. 3150 FPM
Sanding Belt Oscillations.............................................................................. 3/4 in.
Sanding Belt Length...................................................................................... 89 in.
Sanding Belt Width........................................................................................ 6 in.
Sanding Belt Tilt................................................................................... 0 – 90 deg.
Model W1730 Machine Specifications, Page 1 of 2
Table Information
Table Length......................................................................................... 26-7/8 in.
Table Width............................................................................................... 12 in.
Table Thickness....................................................................................... 1-1/4 in.
Table Travel........................................................................................... 3-3/4 in.
Floor To Table Height................................................................... 35-3/4 – 39-1/2 in.
End Table Length................................................................................... 11-1/2 in.
End Table Width.......................................................................................... 10 in.
End Table Thickness.................................................................................... 3/4 in.
End Table Travel......................................................................................... 10 in.
Platen Information
Platen Type.................................................................................. Graphite Coated
Platen Length........................................................................................ 30-1/4 in.
Platen Width.......................................................................................... 6-3/4 in.
Construction
Table............................................................................. Precision-Ground Cast Iron
Frame....................................................................................................... Steel
Base......................................................................................................... Steel
Drive Roller.......................................................................................... Aluminum
Idler Roller.............................................................................................. Rubber
Paint............................................................................................ Powder Coated
Other Related Information
No Of Dust Ports............................................................................................... 2
Dust Port Size.............................................................................................. 4 in.
Belt Release..................................................................................... Quick Release
Drive Roller Size........................................................................................... 7 in.
Idler Roller Size....................................................................................... 3-7/8 in.
Other
Country Of Origin ............................................................................................. Taiwan
Warranty ....................................................................................................... 2 Years
Approximate Assembly & Setup Time ................................................................. 15 Minutes
Serial Number Location .................................................................... ID Label Above Motor
Sound Rating .................................................................................................... 90 dB
ISO 9001 Factory ................................................................................................... No
CSA Certified ...................................................................................................... Yes
Features
Sanding Surface Tilts Vertical to Horizontal
T-Slot Table and Miter Gauge
Quick Release Belt Tension Lever
Graphite Coated Platen
Oscillating Sanding Surfaces
Sanding Belt Oscillates at 52 Cycles per Minute
Includes 3 Spindles Drums: 1 1/2", 2", 3" x 4 1/2"
Platen Tilts 0 to 90 degrees (5 deg. Scale)
Model W1730 Machine Specifications, Page 2 of 2
Loading...