Woodstock W1680 User Manual

MODEL W1680

1 HP 17" FLOOR MODEL DRILL PRESS

Product Dimensions

Weight.......................................................................................................... 270 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................ 14 x 24 x 64 in.

Footprint (Length x Width)......................................................................... 22-1/2 x 11 in.

Shipping Dimensions

Type.................................................................................................... Cardboard Box

Content........................................................................................................ Machine

Weight.......................................................................................................... 185 lbs.

Length x Width x Height........................................................................... 21 x 56 x 11 in.

Electrical

Power Requirement.................................................................... 110V, Single-Phase, 60 Hz

Prewired Voltage................................................................................................. 110V

Full-Load Current Rating......................................................................................... 10A

Minimum Circuit Size............................................................................................. 15A

Connection Type......................................................................................... Cord & Plug

Power Cord Included.............................................................................................. Yes

Power Cord Length.......................................................................................... 8-1/2 ft.

Power Cord Gauge............................................................................................ 16 AWG

Plug Included....................................................................................................... Yes

Included Plug Type............................................................................................... 5-15

Switch Type............................................................. Toggle Safety Switch w/Removable Key

Motors

Main

Type......................................................................... TEFC Capacitor-Start Induction

Horsepower................................................................................................. 1 HP

Phase.............................................................................................. Single-Phase

Amps.......................................................................................................... 10A

Speed.................................................................................................. 1725 RPM

Power Transfer ................................................................................... V-Belt Drive

Bearings............................................................... Shielded & Permanently Lubricated

Main Specifications

Construction

Table............................................................................. Precision-Ground Cast Iron

Spindle Housing....................................................................................... Cast Iron

Column..................................................................................................... Steel

Head.................................................................................................... Cast Iron

Base.................................................................................................... Cast Iron

Paint..................................................................................................... Enamel

Model W1680 Machine Specifications, Page 1 of 3

Head Information

Head Swivel........................................................................................... 360 deg.

Other Related Information

Base Length............................................................................................... 18 in.

Base Width................................................................................................ 11 in.

Quill Diameter........................................................................................ 2.040 in.

Depth Stop Type......................................................... Threaded Rod with Positive Stop

Column Diameter..................................................................................... 3.150 in.

Mobile Base............................................................................................. D2057A

Has Work Light.............................................................................................. Yes

Light Socket Type............................................................................. 110V, Std Bulb

Maximum Bulb Wattage.................................................................................. 60 W

Spindle Information

Spindle Taper.............................................................................................. MT#3

Spindle Travel........................................................................................ 3-1/4 in.

Distance From Spindle To Column................................................................. 8-1/2 in.

Distance From Spindle To Table.................................................................. 31-1/2 in.

Distance From Spindle To Base................................................................... 31-1/2 in.

Table Information

Table Diameter........................................................................................... 14 in.

Table Thickness....................................................................................... 1-1/2 in.

Floor To Table Height........................................................................ 24 – 45-1/2 in.

Vertical Table Movement......................................................... Crank Handle Operation

Table Swing............................................................................................ 360 deg.

Max Table Tilt (Left/Right)........................................................................... 90 deg.

Table Swivel Around Center........................................................................ 360 deg.

Table Swivel Around Column....................................................................... 360 deg.

Maximum Movement Of Work Table............................................................. 21-1/2 in.

Number of T Slots............................................................................................. 6

T Slot Width............................................................................................. 1/2 in.

T Slot Length............................................................................................... 6 in.

Operation Information

Type......................................................................................................... Floor

Swing....................................................................................................... 17 in.

Drilling Capacity (Mild Steel).................................................................. 1 in. in Steel

Number of Spindle Speeds.................................................................................. 12

Range of Spindle Speeds..................................................................... 150 – 3050 RPM

Drill Chuck Type............................................................................... JT3 Key Chuck

Drill Chuck Size................................................................................. 1/16 – 5/8 in.

Other

Country Of Origin ............................................................................................... China

Warranty ....................................................................................................... 2 Years

Approximate Assembly & Setup Time ................................................................. 45 Minutes

Serial Number Location .......................................................................... ID Label on Head

ISO 9001 Factory ................................................................................................... No

CSA Certified ....................................................................................................... No

Model W1680 Machine Specifications, Page 2 of 3