Woodstock SB1039F User Manual

MODEL SB1039F
REF PART # DESCRIPTION REF PART # DESCRIPTION
1518 PSB1039F1518 DRO ASSEMBLY FAGOR 2-AXIS 1518-3 PSB1039F1518-3 DRO Y-AXIS SCALE FAGOR MKT-22
1518-1 PSB1014F2318-1 DRO DISPLAY FAGOR 20-iT 1601 PSB1039F1601 MACHINE ID LABEL
1518-2 PSB1037F2318-2 DRO X-AXIS SCALE FAGOR MKT-102 1618 PSB1039F1618 MODEL NUMBER LABEL
1618
1518
1518-1
1518-3
1518-2
1601
Motor: 5/2.5HP, 220V, 3-Ph, 60Hz Full-Load Current Rating: 14.3A Swing Over Bed: 14.17" Distance Between Centers: 40" Swing Over Cross Slide: 8.66" Swing Over Gap: 20.94" Spindle Nose to Gap: 6.46" Cross Slide Travel: 7" Compound Travel: 4" Spindle Nose: D1-5 Camlock Spindle Bore: 1.57" Taper Inside Spindle: MT#5 Taper Inside Tailstock: MT#3 Weight: 2420 lbs.
Made in Taiwan to South Bend Specifications
TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHILE USING THIS MACHINE:
WARNING!
!
MODEL SB1039F
14" x 40" 16 SPEED LATHE 220V w/DRO
MFG Date
Serial No.
1. Read and understand manual before starting.
2. Always wear approved eye protection.
3. Make sure the machine is connected to a grounded power source.
4. Keep all guards in place.
5. DO NOT wear loose clothing, gloves, or jewelry; secure long hair and roll up long sleeves.
6. Disconnect power before service, maintenance, or adjustments.
7. DO NOT operate when tired or under the influence of drugs or alcohol.
8. Make sure the machine is properly adjusted/set up before starting.
9. Change cutting fluid regularly and avoid contact with skin.
10. Make sure workpiece is properly and securely held in the chuck and has safe clearance through full rotation before starting the lathe.
11. Never leave the chuck key in the chuck.
12. Never touch the chuck or workpiece when it is in motion.
13. Never leave the lathe running unattended.
14. Make sure long workpieces are properly supported.
15. Always use the proper speed rate for the material you are turning.
16. Do not allow children to have unsupervised access to the machine.
14" X 40" LATHE 220V w/DRO
Manual Insert
PHONE: (360) 734-1540 • www.southbendlathe.com
The Model SB1039F Lathe is the same machine as the Model SB1039 except for the following:
Exceptforthedifferencesnotedinthisinsert,allothercontentintheModelSB1039Owner’sManual appliestothismachine.Beforeoperatingyournewlathe,youMUSTreadandunderstandthisinsert, theentireModelSB1039Owner’sManual,andtheFagorDROOwner’sManualtoreducetheriskof injurywhenusingthismachine.Keepthisinsertforlaterreference.
IfyouhaveanyfurtherquestionsaboutthismanualinsertorthedifferencesbetweentheModel SB1039FandtheModelSB1039,contactourTechnicalSupportat(360)734-1639oremail sales@southbendlathe.com.
New & Changed Parts
Copyright © June, 2011 by South Bend Lathe Co.
WARNING: No portion of this manual may be reproduced without written approval.
#BL14239 Printed in USA
Model SB1039F
South Bend 14" x 40" 16 Speed Lathe 220V
with DRO
Product Dimensions
Weight........................................................................................................................................................... 2444 lbs.
Width (side-to-side) x Depth (front-to-back) x Height................................................... 80-3/4 x 32-1/8 x 54-3/8 in.
Footprint (Length x Width)...........................................................................................................
80-3/4 x 19-1/2 in.
Shipping Dimensions
Type..................................................................................................................................................
Wood Slat Crate
Content.......................................................................................................................................................... Machine
Weight........................................................................................................................................................... 2713 lbs.
Length x Width x Height................................................................................................................... 90 x 40 x 69 in.
Electrical
Power Requirement.................................................................................................................
220V, 3-Phase, 60 Hz
Full-Load Current Rating.................................................................................................................................
14.3A
Minimum Circuit Size.......................................................................................................................................... 20A
Switch................................................................................................................. Magnetic with Thermal Protection
Switch Voltage.................................................................................................................................................... 220V
Plug Included..........................................................................................................................................................
No
Recommended Plug/Outlet Type..........................................................................................................
NEMA 15-20
Motors
Main
Type........................................................................................................................................ TEFC Induction
Horsepower..................................................................................... 5HP at 3450 RPM, 2.5 HP at 1725 RPM
Voltage...................................................................................................................................................... 220V
Phase....................................................................................................................................................
3-Phase
Amps....................................................................................................................................................
14A/10A
Speed....................................................................................................................................... 3450/1720 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................... Variable
Power Transfer .........................................................................................................................
V-Belt & Gear
Bearings....................................................................................................
Shielded and Permanently Sealed
Coolant
Type........................................................................................................................................ TEFC Induction
Horsepower............................................................................................................................................ 1/8 HP
Voltage...................................................................................................................................................... 220V
Phase....................................................................................................................................................
3-Phase
Amps..........................................................................................................................................................
0.3A
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds........................................................................................................................................... 1
Power Transfer ............................................................................................................................ Direct Drive
Bearings....................................................................................................
Shielded and Permanently Sealed
Model SB1039F
MANUAL INSERT
Mfg.Since4/11
-2-
Loading...
+ 2 hidden pages