Woodstock d3012, d3016 User Manual

Model D3012–D3016

Wood Clamp Hardware Kit

Instruction Sheet

Phone #: [phone] • Online Tech Support: [e-mail] • Web: www.shopfox.biz

Introduction

The Shop Fox Wood Clamp Hardware Kit provides
all the necessary hardware to make your own
wood clamp. Wood clamps are very handy during
many woodworking applications. Wood jaws are
non-marring and eliminate the need for pads, and
two wood clamps can work together for a quick
and easy bench vise. The jaws of the clamp should
be made from a hardwood such as maple.

Be sure to read the entire instruction sheet
before beginning the construction of the wood
clamps. Follow every step and use the rec­ommended tools and supplies. Also, read the
instruction manuals and follow all safety pre­cautions for any tools you are using to com­plete this project. Be certain that the tools
used for this installation are intended for the
task that will be performed. Failure to do this
could result in serious personal injury.

Wear safety glasses during
the entire assembly process.
Failure to comply may result
in serious personal injury.

We stand behind our products! In the event that
questions arise about this product, please contact
Woodstock International Technical Support at (360)
734-3482 or send e-mail to:

[e-mail].

Figure 1. Wood Clamp Hardware Kit.

Inventory

Item Qty.

Wooden Handles ....................................... 2

Threaded Clamp Rods ................................. 2

Handle Pins ............................................. 2

Dowel Nuts (Right-Hand Threads) ................... 2

Dowel Nuts (Left-Hand Threads) .................... 2

Tools Required

• Saw (Hand Saw, Bandsaw, Table Saw or Jig
Saw)

• Drill Press/Drill Bit Set

• Ball Peen Hammer

• Sandpaper

Materials Required

• Hardwood Stock (see Sizing Information for
approximate dimensions).

COPYRIGHT © 2001 BY WOODSTOCK INTERNATIONAL, INC. REVISED JUNE, 2011 (JB)

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China

D3012–D3016 Wood Clamp Hardware Kit Instructions

G

F

I

B

A

(Drawing not to scale)

Top View

Side View

Bottom View

D

J

C

32°

E

H

I

C

K

K

18

°

18

°

18

°

18

°

KK

Sizing Information

The dimensions below are based on standard wood hand-screw clamps for each size kit. The jaws can be
created according to these dimensions or customized to your own needs. Due to the custom nature of
the kit, the overall size and shape of the clamp can vary significantly. Keep in mind, however, that the
clamping capability is determined by the hardware included, so you should adhere to the basic overall
dimensions to avoid creating oversized clamps with undersized hardware!

Model A B C D E F G H I J K

D3012 4" 1

D3013 6" 1

D3014 8" 1

D3015 10" 1

D3016 12" 2

1

⁄8" 1" 3 1⁄2" 2 1⁄16"

3

⁄8" 1 1⁄4" 5 1⁄8" 3 1⁄8"

3

⁄4" 1 1⁄2" 7" 4 1⁄4"

3

⁄4" 1 5⁄8" 8 3⁄4" 5"

1

⁄4" 1 7⁄8" 10 3⁄4" 6 1⁄4"

3

⁄8"

1

⁄2"

9

⁄16" 1 1⁄4"

1

⁄2" 1 1⁄4"

5

⁄8" 1 1⁄2"

15

3

⁄4"
⁄16"

3

1

9

⁄16"

9

⁄16"

3

⁄8"
⁄2"

⁄4"

13

15

1

⁄2"

5

⁄8"

3

⁄4"
⁄16"
⁄16"

7

1

5

5

11

⁄16"

⁄2"
⁄8"
⁄8"
⁄16"

5

⁄16"

3

1

1

9

⁄16"

⁄8"
⁄2"
⁄2"

Figure 2. Sizing information.

-2-