Woodhaven 3260, 3290 User Manual
Parts List:
Please identify and verify that you have all of the
hardware shown below prior to assembly.
Parts listed below are not shown in the hardware
drawings. Refer to photos in the instructions:
Part Description Quantity
4024 24” Double Track, 3260 . . . . . . . . . . . . 1
4048 48” Double Track, 3270 . . . . . . . . . . . . 1
4072 72” Double Track, 3280 . . . . . . . . . . . . 1
4096 96” Double Track, 3290 . . . . . . . . . . . . 1
3724L 24” Tape Measure, 3260 . . . . . . . . . . . . 1
3748L 48” Tape Measure, 3270 . . . . . . . . . . . . 1
3796L 96” Tape Measure, 3280 & 3290 . . . . . 1
3260A Pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3260B Pivot Spacer . . . . . . . . . . . . . . . . . . . . . . . 1
3260C Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3260D Cursor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3200D Pencil Holder . . . . . . . . . . . . . . . . . . . . . 1
3200P Router Plate . . . . . . . . . . . . . . . . . . . . . . . 1
3200S Plate Spacer . . . . . . . . . . . . . . . . . . . . . . . 1
4973 Router Plate Hardware . . . . . . . . . . . . . 1
3260, 3270, 3280
& 3290 Circle Jig
Owners Manual
Please Read Carefully!
Part# Description Qty.
5770B 1/2” Screw 1
Part# Description Qty.
MF010 3/4” Screw 4
Part# Description Qty.
WN001 Nylon Washer 1
Part# Description Qty.
NUT015 Nut 2
Part# Description Qty.
MF020 1-1/4” Screw 4
Part# Description Qty.
MF025 1-1/2” Screw 2
Part# Description Qty.
5760B Oval Nut 3
Part# Description Qty.
5863 Ratchet Handle 1
Part# Description Qty.
WB002 Washer 2
Part# Description Qty.
3200B Spacer 1
BEFORE BEGINNING
Identify and verify that you have all the parts
listed. Read the instructions at least once, familiarizing
yourself with the parts before beginning. You'll
need a #3 Phillips screwdriver for assembly.
MOUNT ROUTER & ROUTER PLATE
Follow the directions in the 4973 Plate Hardware.
Install the hardware on the Router Plate (3200P) and adjust
it for your router (a plunge router works best), but don’t
attach the router to the Router Plate yet. We offer an optional
drill-style plate (3200PD) that can be drilled for a semipermanent router mounting. We also offer a plate to use with
our Angle-Ease (Purchase Angle-Ease separately, plate
only is PN 3200AP) for more creative circle making.
If you have the 3260 or 3270 Circle Jig, cut two blocks
of wood 2-3/4" long and lay the 24" or 48" Double Track (4024
or 4048 depending on model) on the two blocks as shown.
Insert two 3/4" screws (MF010) thru the two countersunk holes
nearest the U-shaped cutout in the Router Plate (3200P) and
start nuts (NUT015) on the ends of the screws. See fig. 1
If you have the 3280 or 3290 Circle Jig, cut two
blocks of wood 2" long and lay the 72" or 96" Double Track
(4072 or 4096) on the two blocks of wood as shown. It’s
important with tracks over 48" long that they be mounted
in this fashion to reduce flexing, but you can also use this
method for the shorter tracks on the 3260 & 3270 if desired.
Insert two 1-1/2" screws (MF025) thru the two countersunk
holes farthest from the U-shaped cutout in the Router Plate
(3200P). Install the spacer (3200B) on the screws and start
nuts (NUT015) on the ends of the screws. See fig. 2.
Slide the nuts in the router plate onto the end of the Double
Track until the end of the track is even with the opening in
the plate, then tighten the two screws firmly. See fig. 3 & 4.
1
2
3
ASSEMBLY FOR CIRCLES UNDER 10" IN DIAMETER
If you’re cutting circles under 10" in diameter, install
the Plate Spacer (3200S) on the bottom of the Router
Plate using two 3/4" screws (MF010). See fig. 5.
Insert two 1-1/4" screws (MF020) thru the countersunk
holes in the Pivot (3260A). Set the Pivot Spacer (3260B) on
the screws and start oval nuts (5760B) on the ends of the
screws. Slide the Bracket (3260C) on the oval nuts, positioning
it even with the end of the Pivot/Pivot Spacer and flush with
the edges of both, then tighten the screws. See fig. 6.
6
4
5
1
Loading...