Wooden Camera WC-161700, WC-161600, WC-161800 User manual

CRUISER

Included:

(2) 1/4-20x3/8 socket cap

(2) 1/4-20x1 socket cap

3/16 allen wrench

HANDLE BAR

1. Select DOVETAIL, locate SAFETY LATCH and ﬁnd noted 1/4 HOLES as shown below

2. Select and locate SIDE A of SHOULDER PAD to ﬁnd

noted 1/4-20 HOLES as shown below

CLAMP

3. With SIDE A facing SAFETY LATCH, align DOVETAIL over SHOULDER PAD as shown below, select 1/4-20x3/8 SOCKET CAPS, tighten with allen wrench

SIDE A

4. Select HANDLE BAR and 1/4-20x1 SOCKET CAPS, locate 1/4-20 HOLES on CLAMP, align HANDLE BAR to DOVETAIL, tighten with allen wrench.

SIDE B

If 1/4-20 screws are tight when inserting, loosen THUMB SCREW.

SIDE A

5. Loosen THUMB SCREW to adjust HANDLE BAR to desired position

NOTE: THUMB SCREWS can

PULL UP

be adjusted by pulling upward

and turning to desired position

Specifications and Main Features