WOODBRIDGE SDD4876, SDD6076, SDD6062 Installation Manual

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

INSTALLATION MANUAL

R

WOODBRIDGE

SHOWER DOOR

SHOWER DOORS:

SDD4876 SDD6076

IMPORTANT!

WOODBRIDGE reserves the right to alter, modify or redesign products at any time without prior notice for the purpose of product improvement and customer experience. Please refer to WWW.WOODBRIDGEBATH.COM for the latest product details.

Questions?

Please Call Customer Support: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time)

Or Email: help.woodbridge@gmail.com

www.woodbridgebath.com

TUB DOORS: SDD6062

20200323 REV. 2

1

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

IMPORTANT

•WoodBridge reserves the right to alter, modify, or redesign products at any time without prior notice for product improvement or functionality.

•Professional installation required. This product should be installed by someone experienced with the construction requirements for this type of project, the care necessary to responsibly and safely install, and familiarity with glass installation.

•The safety of all installations is the responsibility of the installer who should be

licensed and bonded.

•To prevent breakage and injury, do not attempt to lift, move, or install the glass alone. Use an assist and suction cups intended for heavy glass when applicable.

•To prevent breakage and injury, do not lean or push against glass panels.

•The installation of this model requires drilling into the dam/curb/threshold to properly affix the clip, guide, and threshold. Contact the manufacturer of your base, or tub with any questions regarding drilling into their product, or consult your

installation professional.

•This model requires minimum 3" dam/curb/threshold width to complete installation.

•Drawings included in this manual are illustrative only and do not reflect actual

scale.

•No out of plumb adjustment.

•Glass cannot be installed if the overall width of the shower opening is greater than

the width as described for the product.

WARNING FOR TEMPERED GLASS: TO AVOID RISK OF DAMAGE OR INJURY

•Tempered safety glass is designed that when broken, will shatter into thousands of tiny pieces, greatly reducing the chance of great bodily harm.

•Follow all requirements and recommendations in the instruction manual.

•Perform a thorough inspection of the glass and hardware for any damage prior to

installation.

•Do not install damaged glass.

•Do not install or operate if glass panels have chipped corners, slivered edges, or any other visual defect. If damage is found contact WoodBridge immediately. If installed in this state WoodBridge is not responsible for any breakage.

•Do not install glass panels that have been dropped on, or bumped into any

surface harder than itself.

•Improper handling may cause breakage. While incredibly resistant to direct impact, corners and edges are the most

susceptible to damage, causing breakage. These edges should be protected and handled with care, never allowed to come into contact with any material harder than itself, such as tile, stone, metal, or even other glass. A concentrated point of

impact or contact with such material can cause the glass to shatter. Tempered

glass may release all at once, or partially, releasing hours or even days later with vibration and normal use.

•Incorrect installation of the hardware, rollers, stoppers, or glass may cause breakage.

Improper installation would include loose hardware, or lack of gaskets between hardware and glass. Installing out of level or plumb causing extra stress could

www.woodbridgebath.com

2

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

•Improper use of the product. Do not place towels or anything else over guide rail. Aggressively opening or

closing the slider may cause trauma to the glass which could lead to breakage.

•Do not attempt to cut tempered glass.

•Always wear safety equipment such as goggles, work gloves, proper footwear

etc... during installation.

•Instruct homeowner on how to conduct periodic inspections and how to

properly maintain the glass and all hardware.

•Consideration should be given when installing tempered glass products in

households with young children or elderly.

PREPARATION

•Thoroughly read the instructions before installing or using the product.

•After boxes and packages are open, before installation, check that all items from the parts list are there by marking each one off the list.

•Examine the glass and parts for defects or damage.

•Please note that Woodbridge will not replace any missing or damaged items

free of charge after 5 business days or if the product has been installed.

•Building codes vary by location and you should refer to your local building

codes when installing. WoodBridge is not responsible for code compliance and will not accept returns on that basis.

•Prior to installation ensure that all surfaces are smooth and even. Ensure the dam/curb/threshold is level side to side and that it has slope/fall in the direction

of the shower pan. Ensure the walls are plumb and the opening measures the same top and bottom. Ensure that the installation surface is solid and able to support the weight of the doors.

•Please note that irregular installation surface, round lower corners, or out of

plumb walls will result in serious problems for your installation.

•Some adjustments and drilling/screwing will be necessary throughout

installation.

•Woodbridge shower doors are not designed to be installed on fiber glass surrounds that have round lower corners or lack of solid mounting surface.

•Glass must never be set down directly on any hard surface. Always use pieces of wood or thick cardboard to protect lower edge at all times. Leave corner protectors in place until it is time to remove them

www.woodbridgebath.com

3

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

Important Note

Attention:

These Woodbridge shower doors

include SHATTER-SAFE protective

film on the side of the glass without the certification information printed

on it, see the fig 1 & 2.

INTERSIDE

Fig 1

OUTERSIDE

Fig 2

www.woodbridgebath.com

SHATTER-SAFE protective film

helps to hold glass in place in the

event of breakage. Allowing the panel to be carefully removed by

a professional at a later date.

4

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

In the event of breakage please follow the steps below.

1. If someone is inside the shower, move the panel slowly out of the way and exit the

bathroom as soon as possible. Do not allow anyone to re-enter bathroom until prepared

to remove and dispose of broken panel.

2. Utilize safety precautions such as a hard-hat, safety glasses, leather gloves, proper footwear and moving blankets to minimize risk of injury.

3. It is recommended that two people assist in the removal of the panel. One person to hold panel steady, and the other to un-install the hardware. Then carefully remove glass from shower and lay flat on cardboard or plywood until it can be removed. Once laying flat a razor knife or box cutter can be utilized to cut the film and remove in smaller pieces.

www.woodbridgebath.com

5

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

B

A

C

D

E

!

IMPORTANT INFORMATION REGARDING THE INSTALLATION OF THIS SHOWER DOOR

A. Installation into a stud is strongly recommended.

B. Roller Wheel Assembly safety set screws: must be accessible and must

be retightened with Thread Lock during installation. Stopper must be installed at the proper position to prevent the door from contacting the wall.

C. The Guide Block must be screwed to the threshold. Installing the guide block crooked may damage the bottom edge of the Door Glass and lead to breakage.

www.woodbridgebath.com

6

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

Tools

Level

Drill Bit Ø1/8" (3mm)

Safety Glasses

Drill Bit Ø3/16" (4mm)

Tape

Measure

Drill Bit Ø1/4" (6mm)

Work Gloves

Pencil

Drill Bit Ø5/16" (8mm)

Hacksaw

Phillips

Screwdriver

Drill Bit Ø3/8" (10mm)

Soft Head Hammer

#3 Phillips Driver Bit

Silicone

Miter saw

Professional-grade Glass suction cup

Power Drill

Painter's Tape

INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN SERIOUS INJURY OR DEATH

LICENSED AND INSURED PROFESSIONAL CONTRACTOR IS REQUIRED TO INSTALL

THIS PRODUCT INCLUDING ASSISTANCE OF A SECOND PERSON DURING INSTALLATION

No modifications to the product are allowed. Modifications of any types to the product will result in serious injuries or may cause death.

IMPORTANT: Do not install the handle on to the glass door unl the

instrucon tells you to do so. Never li the glass using the handle. Failure to do so will result in serious personal injury and could cause damages to the glass. Professional graded glass sucon cups are highly recommended while handling extremely heavy glass. This product must be installed on a ﬁnished threshold and against ﬁnished walls only. This product is intended for residenal use only.

Razor Knife

CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT.

THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION!

Extender Driver Bit

Soft Cloth or Blanket

Soft Wood Shim

www.woodbridgebath.com

7

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

1

2

3

R

13

4

5

6

7

8

9a

9b

14

2mm

5mm

www.woodbridgebath.com

10

11

12

8

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

R

WOODBRIDGE

Parts List

R

1

Header Bar

4

Safety Pin

7

x1

x4

2

Wall Profile

5

Cover

8

x2

3

Glass Door Stopper

6

Handle

9a

x8

x2

Glass Door

9b

Guide Block

12

Screw M4X60

x2

x1

x6

Anti-splash Threshold

10

Wall Anchor

13

Roller

x1

x10

x4

Guide Block

11

Screw M4X30

14

Allen Key

2mm

x1

x2

5mm

x2

www.woodbridgebath.com

9

WOODBRIDGE SDD4876, SDD6076, SDD6062 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual