Wolo V-111 User Manual

INSTALLATION INSTRUCTIONS

MODELS 250-2T, 260-2T, 270-2T, 275-2T, 300-2T, 305-2T & V-111

Your purchase of a Wolo horn is a perfect choice to compliment your vehicle. Wolo’s products are manufactured with the
finest materials. Each horn is tested to ensure it meets all manufacturing specifications, before it is packaged. If you
need help installing this product, our technicians are available to answer your questions, Monday through Friday from 9
AM to 4 PM EST by calling 1-888-550-HORN (4676).

MOUNTING FIG. #1

1. Remove the factory horn, and install your new Wolo horn
in the same position with the horn facing downward to pre­vent dirt and water from entering into the horn. Secure the
horn to the vehicle using the bracket and hardware pro­vide.
IMPORTANT: For one (1) terminal factory horn system,
the grounding jumper wire needs to be secured under the
mounting bolt before securing horn to a metal body
grounding surface. Fig. #2

TWO (2) TERMINAL WIRING FIG. #1

2. For vehicles where the factory horn wires connect to two
(2) horn terminals, simply transfer the factory horn wires to
new Wolo horn. It doesn’t make a difference which horn
terminals are used on your new Wolo horn when transfer­ring the wires from your factory horn. IMPORTANT: Always
make sure that there is a 10-amp fuse used in the horn circuit to protect the vehicle. If the wire terminals that were
connected to your vehicle’s factory horn doesn’t not connect to your new Wolo horn, provided in the kit is two (2) 1/4”
push-on insulated terminals. The installation is complete and the horn is ready to be used.

ONE (1) TERMINAL WIRING FIG. #2

3. For vehicles where the factory horn wire connects
to only one (1) horn terminal. Transfer the factory
horn wires to your Wolo horn. It doesn’t make a dif­ference which horn terminal is use when transfer­ring the wire from your factory horn.

4. Using the grounding wire supplied, place the loop
end under the mounting bolt of the horn and firmly
tighten. Make sure the horn’s mounting bracket is
secured to a metal body surface that is clean of
paint and rust

5. Attach the grounding wire’s female terminal to the
horns unused terminal. IMPORTANT: Always make
sure that there is a 10-amp fuse used in the horn
circuit to protect the vehicle. Installation is com­plete. . If the wire terminal that was connected to
your vehicle’s factory horn doesn’t not connect to
your new Wolo horn, provided in the kit is two (2) 1/4” push-on insulated terminals.

WARRANTY

Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of
purchase, that this product is free from defects in workmanship and materials. If there is such a proven defect,
Wolo, at its option, will either repair or replace the item free of charge, if it is returned to Wolo within three months
from the date of purchase together with proof of purchase as described below. Wolo reserves the right to inspect
any defect prior to settling any warranty claim by repair or replacement. This warranty is limited as above provided
and Wolo will not be responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifi­cations, faulty installation of this product, or natural causes.

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WAR­RANTIES OF MERCHANTABILITYAND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO
A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR
ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF
BREACH OF WARRANTY OR OTHERWISE.

To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase.
Provide with the return a brief description of the problem. Also, include with the return a check or money order in the
amount of $10.00 to cover return shipping. Mail to:

Wolo Manufacturing Corp.

One Saxwood Street, Deer Park, NY 11729 Attn: Warranty Service

E-mail: [e-mail]

© 2006 Wolo Mfg. Corp. All Rights Reserved