INSTALLATION INSTRUCTIONS FOR
BEYOND MODEL 3800M
LED WARNING LIGHT MAGNET MOUNT
Your choice of a Wolo warning light is the perfect choice to complement your vehicle. Wolo’s warning lights are
manufactured with the finest materials. Each light is tested to meet our high standards before it is packaged,
to assure a perfect working light. Our quality workmanship and components are Wolo’s assurance of a product
that will give years of dependable service. If you need help using your new Wolo warning light, our technicians
are available to answer your questions, Monday thru Friday, from 9 AM to 4 PM EST at 1-888-550-4676.
MAGNET MOUNTING:
MPORTANT: Vehicle roof construction varies for most vehicles as well as driving conditions. The vehicle should
never be driven with this warning light magnetically mounted. It is possible that the light could dislodge off the
mounting surface and cause damage, injury or death. Ignoring this warning shall be the sole responsibility of
the user and or vehicle owner.
IMPORTANT: The magnets’ holding power to the mounting surface is dependent upon the following:
flatness, thickness, condition and finish of the mounting surface. For maximum magnet strength, follow these
recommendations:
1. The vehicle’s mounting surface should be kept clean and free of wax, dirt, dust and foreign particles.
2. The bottom of the magnets’ rubber cover should be kept clean and free of wax, dirt, dust and foreign
particles.
3. Always make sure that the mounting surface is flat and that all four (4) magnets are fully secured.
4. Never attempt to secure the magnets to a vehicle that has a fabric or vinyl covering the mounting surface.
5. Once you have located the desired mounting location, you should make sure the lens is unobstructed so
that the light can be seen 360 degrees.
POWERING WARNING LIGHT: Fig. 1
6. To turn on the light bar, simply insert the light’s cigarette lighter plug into the vehicle’s power outlet. Press
the on/off button on the back on the cigarette lighter plug. When the light is operating the LED on the plug’s
rocker switch will illuminate
7. To turn off the warning light, remove the cigarette lighter plug from the vehicle’s power socket or position
the on/off switch to off.
IMPORTANT: The warning light’s cigarette lighter plug has a built-in fuse to protect the light and the vehicle. If
the warning light does not turn on when the plug is inserted into the vehicle power outlet, check the fuse by
the following method: The tip of the power plug has a chrome push-in contact which is secured by the plastic
nut. Unscrew the nut, and you will have access to the fuse. If the fuse needs to be replaced use a 5-amp fuse.
Follow the reverse procedure to re-assemble fuse back into power plug. See Fig. 1.
CHANGING LIGHT PATTERN:
There are twelve (12) different light patterns to choose from. Press the pattern selector switch button on the
back of the cigarette lighter plug and the light pattern will change. Each time the pattern switch is pressed the
light pattern will change.
CLEANING:
A scratched, dull or dirty lens can cause a reduction in brightness of warning light. Never use a caustic or
petroleum base cleaner on any surface of the warning light. For best cleaning results, always use household
glass cleaner or mild soap with a soft lint free rag.
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the
date of purchase, that this product is free from defects in workmanship and materials. If there is such a
proven defect, Wolo, at its option, will either repair or replace the item free of charge, if it is returned to
Wolo within three months from the date of purchase together with proof of purchase as described below.
Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair or replacement.
This warranty is limited as above provided and Wolo will not be responsible for fire or other casualty
or accident, due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or
natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
LIMITED TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO
PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER
ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of
purchase. Provide with the return a brief description of the problem with a daytime telephone number. Also,
include with the return a check or money order in the amount of $20.00 to cover return shipping.
Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street, Deer Park, NY 11729
E-mail: tech@wolo-mfg.com
© 2013 Wolo Mfg. Corp All Rights Reserved.