Wolo 225-2T User Manual

LOUD & CHROME HORN

Models 225-2T

INSTALLATION INSTRUCTIONS

Your purchase of a Wolo horn is a perfect choice to compliment your vehicle. Wolo’s products are
manufactured with the finest materials. Each horn is tested to ensure it meets all manufacturing
specifications, before it is packaged. If you need help installing this product, our technicians are available to
answer your questions, Monday through Friday from 9 AM to 4 PM EST by calling 1-888-550-HORN (4676).

MOUNTING FIG. #1

1. Remove the factory horn, and install your new Wolo horn in the
same position with the opening of the horn facing downward to
prevent dirt and water from entering into the horn. Secure the horn
to the vehicle using the bracket and hardware provide.
IMPORTANT: For one (1) terminal factory horn system, the
grounding jumper wire needs to be secured under the mounting
bolt before securing horn to a metal body grounding surface.
Fig. #2-3

TWO (2) TERMINAL WIRING FIG. #2

2.

For vehicles where the factory

horn wires connect to two (2) horn terminals.Transfer the factory horn
wires to each new Wolo horn. It doesn’t make a difference which horn terminals are used on your new
Wolo horn when transferring the wires from your factory horn. IMPORTANT: Always make sure that there
is a 15 -amp fuse used in the horn circuit to protect the vehicle. If the wire terminals that were connected to
your vehicle’s factory horn doesn’t connect to your new Wolo horn, 1/4” push- on insulated terminals are
provided in the kit. The installation is complete and the horn is ready to be used.

ONE (1) TERMINAL WIRING FIG. #3

3. For vehicles where the
factory horn wire
connects to only one (1)
horn terminal. Transfer
the factory horn wires to
your new Wolo horn. It
doesn’t make a
difference which horn
terminal is use when
transferring the wire
from your factory horn.

4. Using the grounding

wires supplied, place
the loop end under
each of the mounting
bolts of the horn and firmly tighten. Make sure the horn’s mounting bracket is secured to a metal body

surface that is clean of paint and rust.

5. Attach each of the grounding wires female terminals, to the unused terminal of each horn. IMPORTANT:

always make sure that there is a 15-amp fuse used in the horn circuit to protect the vehicle. Installation is
complete. If the wire terminal that was connected to your vehicle’s factory horn doesn’t connect to your
new Wolo horn, 1/4” push-on insulated terminals are provided in the kit.

WARRANTY

Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the
date of purchase, that this product is free from defects in workmanship and materials. If there is such a
proven defect, Wolo, at its option, will either repair or replace the item free of charge, if it is returned to
Wolo within three months from the date of purchase together with proof of purchase as described below.
Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair or
replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other
casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation of this
product, or natural causes.

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE
IMPLIED WARRANTIES OF MERCHANTABILITYAND OF FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY LIMITED TO ATERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL
WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.

To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of
purchase. Provide with the return a brief description of the problem. Also, include with the return a check or
money order in the amount of $10.00 to cover return shipping. Mail to:

Wolo Manufacturing Corp.

One Saxwood Street, Deer Park, NY 11729 Attn: Warranty Service

E-mail: [e-mail]

© 2008 Wolo Mfg. Corp. All Rights Reserved