Wolf Cinema DCD-500FD Product Sheet
DCD-500FD Features
• Single 0.95 DLP
[1920 x 1080] by Texas
Instruments
• 12,000 ANSI peak white,
5,000 native CR performance
• Six lens options available,
including two xed and four
motorized VariScope optical
assemblies
• Ample H+V offset capabilities
[+/- 133% vertical, +/- 50%
horizontal]
• Dual 465W lamps [sequential
or concurrent operation],
1500-2000 hour life each
• Factory hand-calibrated for
imaging excellence
• ProScaler MK III Video inputs –
2 HDMI (SD/HD 1.4a), one HDMI
1.4a video output
• ProScaler features 10-bit video
processing, multiple calibration
memories per input
• E- VariScope™ for 2.35:1 lm
widescreen viewing on constant
height screens (no anamorphic
lens required)
• Three optional cinema-grade
VariScope™ anamorphic lens
assemblies [two xed, one
motorized]
• IR remote control included
plus RS-232, HDbaseT system
control capabilities
• Elegant black cabinet with
optimized thermal design for
extended projector and lamp life
• Optional WC-PM-L ceiling
mount assembly
®
HD engine
D CD-500FD
DLP® Cinema Projector
DCD-500FD High Output DLP® Projection System
12,000 ANSI dual lamp home theater projector with ProScaler MK III
Enjoy ultra-bright, bold and colorful imagery from today’s best sources with Wolf Cinema’s
latest high-performance projection system, the DCD-500FD. Boasting 12,000 ANSI of peak
white performance and excellent contrast levels, this system can cast razor-sharp images on
screens as large as 20-ft [6.1 meters] in width!
The powerful dual-lamp technology deployed in the DCD-500FD will facilitate output levels
rivaling smaller Hollywood cinema installations – but packaged in a quiet, diminutive chassis
design with the home theater enthusiast in mind. Twin 465W UHP lamps can be run concurrently
to achieve maximum peak white output, or can be dialed back in “eco” modes for extended
life. The lamps can also be fired independently and run in “sequential” operating modes,
achieving even longer lamp and run times between lamp changes.
®
Wolf Cinema’s DCD-500FD ensemble boasts Texas Instrument’s latest 0.95 DLP
chip set for ultra-fast, lag-free images from all your favorite SD and HD sources. The six-segment
color wheel [RGBCYW] timing has been further optimized for excellent color tracking, while the
projector’s dynamic aperture helps increase deep black contrast level performances to well
over 5000:1.
The included rack-mountable ProScaler MK III video processor delivers some of our most
advanced Wolf Cinema video processing to date, with multi-axis CMS calibration capabilities
for precise color tracking, superior motion and noise reduction algorithms, multiple calibration
memories per input/per frequency, and more. But the best part may be our latest technology
wizardry known as E-VariScope™: enjoy that immersive 2:35:1 CinemaScope
experience without those unwanted top & bottom “black bars” as experienced on 16/9 screens…
and all without an external anamorphic lens!
The DCD-500FD will deliver year after year of that “uncompromised Wolf Cinema image” in all
viewing modes, from all your favorite sources.
imaging
®
widescreen
DCD-500FD
Specifications
DCD-500FD High Output DLP® Projection System
®
Display Technology Single 0.95 DLP
Resolution 1920 x 1080 (HD 1080p)
Illumination Dual 465W UHP lamps (concurrent or sequential operation)
Performance 12,000 ANSI lumens, ~5,000:1 contrast ratio (via dynamic aperture)
Noise Levels 37dB SPL (eco mode), 40 dB SPL (normal)
Inputs Multiple projector inputs include HDMI, DVD-D, Display Port, DB-15 PC, Component, Composite, S-Video
Signals 480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz, 1080p/24 Hz, 1080p/50 Hz,
1080p/60 Hz
Lens Options Six Lens Options (four with VariScope zoom/memory capabilities):
0.85-1.0:1 Manual Zoom 1.0-1.35:1 Manual Zoom 1.2-1.5:1 VariScope Lens
1.5-2.0:1 VariScope Lens 2.0-4.0:1 VariScope Lens 4.0-7.0:1 VariScope Lens
Lens Offsets +/- 133% vertical, +/- 50% horizontal
Control RS-232C terminal, D-sub 9-pin (male), RJ-45 LAN terminal, HDBaseT
Power Requirements AC 110V-240V 50/60Hz
Power Consumption Normal Mode: 1100W max (220V) 1180W max (110V); Eco Mode: 880W max (220V), 950W (110V)
Dimensions (LxWxH) 23.78 (L) x 20.47 (W) x 7.16 (H) in., 604 (L) x 520 (W) x 182 (H) mm (without lens and feet)
Weight 52.5 lbs (23.8kg) (without lens)
Technology by Texas Instruments
ProScaler MK III Video Processor
Inputs/Outputs 2 HDMI 1.4a, 1 HDMI video outputs
Video Processing 10 bit scaling, 125 point (5x5x5) gamut correction
Advanced ltering, MPEG mosquito noise, block artifact reduction,
Temporal noise reduction for SD/HD sources; multiple conguration memories per input
E-VariScope™ Enables 2.35:1 viewing on constant height screens [no anamorphic lens required]
Rack Mountable Rack mounting ears included
Control IR; RS-232 (serial input – D sub-9), Wired IR format command input
Power Requirements Universal 110V-240V, 50/60Hz power supply included, output 5.0 VDC, 4.0A
Power consumption 13 Watts
Dimensions (WxHxD) 17” x 2” x 9.5” (1.75”H without feet) (431.8 x 50.8 x 241.3 mm)
Weight 7 lb (3.6kg)
All features and specifications subject to change without notice.
VariScope and E-VariScope are trademarks of Wolf Cinema.
DLP is a registered trademark of Texas Instruments. All rights reserved.
© 2015 Wolf Cinema
800 Addison Street. Berkeley CA 94710
Wolf Cinema
Tel: 510.990.6000 . Fax: 510.894.8411
www.wolfcinema.com
Loading...