Page 1
Planning Information
Warming Drawer
MODEL WWD30
1
Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07
The Wolf Model WWD30, 30" (762)
warming drawer is sold as a base unit
only, a drawer front accessory is required.
30" (762) stainless steel drawer front
panels are available to match L Series and
E Series built-in ovens. The integrated
drawer front allows for a custom wood
panel and handle hardware.
Warming drawers have a clear mission in life—to take
good care of good food until it’s time for you to eat. Our
superior air control helps keep moist foods moist and
crisp foods crisp. In addition, The Wolf warming drawer
is one of the most spacious on the market, so you will
have little problem storing items.
There is a rack for stacking food plus an optional set of
six stainless steel containers with lids that divide the
drawer into sections, keeping different dishes warm at
the same time.
From a design perspective, you have several choices for
the drawer front. Electronic controls are hidden regardless of your panel selection. Stainless steel drawer fronts
are available to match the look of the Wolf L Series and
E Series built-in ovens. For the L Series drawer front,
choose from the classic stainless steel look or the
premium finishes of platinum or carbon stainless steel.
E Series drawer fronts come in the classic stainless steel
finish and framed and unframed door styles.
Also available is the integrated drawer front, which
allows for a custom wood panel. Wolf offers optional
decorative handles for the integrated drawer front.
Model WWD30 with E Series stainless steel drawer front shown.
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model WWD30
L Series Drawer Front
Rack for
stacking food
Galvanized exterior
E Series drawer front
(sold as an accessory)
Ball bearing
drawer glides
Stainless steel
interior
Removable stainless
steel drawer pan
Hidden electronic
touch control panel
Location of
rating plate
Model WWD30
E Series Drawer Front
(unframed shown)
Model WWD30
Integrated Drawer Front
Page 2
Planning Information
Warming Drawer
MODEL WWD30
2
OVERALL DIMENSIONS
FEATURES
L Series stainless steel drawer front with
handle available in classic, platinum and
carbon finishes
E Series stainless steel drawer front with
handle available in classic finish
Integrated drawer front allows for custom
wood panel application
850-watt heating element
Hidden electronic touch control panel
Preset and variable temperature control
Preset automatic shut-off or extended opera-
tion in Sabbath Mode
Stainless steel interior
Rack for stacking food
Removable stainless steel drawer pan
Full-extension, ball bearing drawer glides
CSA certified for US and Canada
CSA approved for outdoor installations
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may vary by ±
1
/8" (3).
Model WWD30 with integrated drawer front.
Model WWD30 with L Series stainless steel drawer front.
Model WWD30 with E Series stainless steel drawer front.
271/8" (689)
OVERALL DEPTH
101/4"
(260)
297/8" (759)
OVERALL WIDTH
101/4"
(260)
297/8" (759)
OVERALL WIDTH
231/2" (597)
BEHIND FRAME
26" (660)
OVERALL DEPTH
231/2" (597)
BEHIND FRAME
9"
(229)
9"
(229)
101/8"
(257)
293/8" (746)
OVERALL WIDTH
231/2" (597)
BEHIND FRAME
9"
(229)
Page 3
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
SPECIFICATIONS
Model WWD30 with L Series Drawer Front
Overall Width 29
7
/8" (759)
Overall Height 10
1
/4" (260)
Overall Depth (including handle) 271/8" (689)
Model WWD30 with E Series Drawer Front
Overall Width 29
7
/8" (759)
Overall Height 10
1
/4" (260)
Overall Depth (including handle) 26" (660)
Model WWD30 with Integrated Drawer Front
Overall Width 29
3
/8" (746)
Overall Height 101/8" (257)
Overall Depth (behind frame) 231/2" (597)
Integrated Panel Dimensions (minimum)
Overlay 30" (762) W x 10
3
/8" (264) H
Inset 293/8" (746) W x 101/8" (257) H
Integrated Panel Thickness (minimum)
5
/8" (16)
Integrated Panel Weight (maximum) 25 lbs (11 kg)
Heating Element 850 W
Electrical Supply Requirements 120 V AC, 60 Hz
15 or 20 amp circuit
Power Cord 3 ft (.9 m) power cord
with grounded plug
Minimum Base Support 200 lbs (91 kg)
Shipping Weight 100 lbs (45 kg)
Special Note Specifications vary for stainless steel
and integrated drawer front applications
Specifications are subject to change without notice.
FRONT PANEL OPTIONS
30" (762) L Series Drawer Front —
Classic Stainless
WWDFRONT/S
Platinum Stainless
WWDFRONT/P
Carbon Stainless
WWDFRONT/B
30" (762) E Series Drawer Front —
Framed / Classic
WWDFRONT-2F/S
Unframed / Classic
WWDFRONT-2U/S
Integrated Drawer Front —
Accepts Wood Panel WWDFRONT/I
Model WWD30 is sold as a base unit only.
A drawer front panel is required. Panels
are available as sales accessories through
your Wolf dealer. Stainless steel drawer
front panels include a handle to match L
Series or E Series built-in ovens.
ACCESSORIES
Tubular handle for integrated
drawer front in classic, platinum
or carbon stainless steel
Classic stainless steel handle for
integrated drawer front to match
E Series ovens
Six-piece container set— includes
six stainless steel pans with lids:
one 6.7-quart pan, one 4.1-quart
pan, two 3-quart pans, two
1.8-quart pans and pan rack
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.
Unit dimensions may vary by ±1/8" (3).
Page 4
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
281/2" (724)
33" (838)
RECOMMENDED CABINET WIDTH
30"min (762)
285/8" (727)
WARMING DRAWER
OPENING WIDTH
E
5"
(127)
4"
(102)
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
NOTE: Refer to the 30" (762) L Series built-in oven specifications for electrical location.
30-INCH OVEN
ROUGH OPENING
24"min (610)
CABINET DEPTH
23/8"
(60)
ANTI-TIP BLOCK APPLICATION
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
273/16"
(691)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
PLATFORM APPLICATION
24"min (610)
CABINET DEPTH
7
/8"
(22)
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
273/16"
(691)
24"min
(610)
7
/8" (22)
PLATFORM
INSTALLATION WITH L SERIES DRAWER FRONT
DIMENSIONS
Recommended Cabinet Width 33" (838)
Minimum Cabinet Width 30" (762)
Rough Opening Width 285/8" (727)
Rough Opening Height 91/8" (232)
Rough Opening Depth (minimum) 237/8" (606)
See Installation Instructions shipped with drawer front for detailed specifications.
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
OPENING
HEIGHT
237/8" min (606)
OPENING DEPTH
24" min (610)
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
DIMENSION
WILL VARY*
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
RECOMMENDED CABINET WIDTH
33" (838)
30" min (762)
4"
(102)
285/8" (727)
OPENING WIDTH
5"
(127)
E
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
Page 5
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
DIMENSIONS
Recommended Cabinet Width 33" (838)
Minimum Cabinet Width 30" (762)
Rough Opening Width 285/8" (727)
Rough Opening Height 91/8" (232)
Rough Opening Depth (minimum) 237/8" (606)
See Installation Instructions shipped with drawer front for detailed specifications.
n
INSTALLATION WITH E SERIES DRAWER FRONT
24"min (610)
CABINET DEPTH
24"min
(610)
7
/8" (22)
PLATFORM
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
PLATFORM APPLICATION
2"(51) x 2"(51)
ANTI-TIP BLOCK
273/16"
(691)
7
/8"
(22)
24"min (610)
CABINET DEPTH
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
ANTI-TIP BLOCK APPLICATION
DIMENSION
WILL VARY*
273/16"
(691)
23/8"
(60)
RECOMMENDED CABINET WIDTH
33" (838)
30"min (762)
281/2" (724)
30-INCH OVEN
ROUGH OPENING
5"
E
(127)
4"
(102)
285/8" (727)
WARMING DRAWER
OPENING WIDTH
NOTE: Refer to the 30" (762) E Series built-in oven specifications for electrical locatio
RECOMMENDED CABINET WIDTH
33" (838)
30" min (762)
91/8" (232)
OPENING
HEIGHT
237/8" min (606)
OPENING DEPTH
24" min (610)
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
4"
(102)
285/8" (727)
OPENING WIDTH
5"
(127)
E
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
Page 6
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
291/2" (749)
WARMING DRAWER
OPENING WIDTH
281/2" (724)
30-INCH OVEN
OPENING WIDTH
33" (838)
CABINET WIDTH
E
5"
(127)
4"
(102)
OVERLAY APPLICATION
273/16"
(691)
24"min
(610)
24" min (610)
OPENING DEPTH
24" min (610)
CABINET DEPTH
11/2"min*
(38)
101/4"
(260)
OPENING
HEIGHT
97/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
FLUSH INSET APPLICATION
273/16"
(691)
24"min
(610)
24" (610) + THICKNESS
OF DRAWER FACE
FOR OPENING DEPTH
25" min (635)
CABINET DEPTH
11/2"min*
(38)
101/4"
(260)
OPENING
HEIGHT
97/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
*Dimension may increase depending on the size of the drawer front panel.
INSTALLATION WITH INTEGRATED DRAWER FRONT
Model WWD30 with integrated drawer front installed with 30" (762) L Series or E Series single built-in oven.
DIMENSIONS
Minimum Cabinet Width 33" (838)
Minimum Cabinet Depth — Overlay 24" (610)
Minimum Cabinet Depth — Flush Inset 25" (635)
Rough Opening Width 291/2" (749)
Rough Opening Height 101/4" (260)
Rough Opening Depth (for flush inset, add thickness of drawer face) 24" (610)
See Installation Instructions shipped with drawer front for detailed specifications.
Page 7
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
INSTALLATION WITH INTEGRATED DRAWER FRONT
Flush Inset Application
Overlay Application
DIMENSIONS
Minimum Cabinet Width 33" (838)
Minimum Cabinet Depth — Overlay 24" (610)
Minimum Cabinet Depth — Flush Inset 25" (635)
Rough Opening Width 291/2" (749)
Rough Opening Height 101/4" (260)
Rough Opening Depth (for flush inset, add thickness of drawer face) 24" (610)
See Installation Instructions shipped with drawer front for detailed specifications.
2"(51) x 2"(51)
ANTI-TIP BLOCK
101/4"
97/8"(251)
24" min (610)
OPENING DEPTH
24" min (610)
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
**Overlap of decorative drawer face will vary depending on the size of the custom panel.
(260)
OPENING
HEIGHT
DIMENSION
WILL VARY*
STANDARD
36" (914)
FLOOR TO
COUNTER
HEIGHT
ALLOW FOR
OVERLAP OF
DECORATIVE
DRAWER FACE
ON ALL SIDES**
RECOMMENDED CABINET WIDTH
2"(51) x 2"(51)
ANTI-TIP BLOCK
101/4"
97/8"(251)
24" (610) + THICKNESS
OF DRAWER FACE
FOR OPENING DEPTH
25" min (635)
CABINET DEPTH
(260)
OPENING
HEIGHT
DIMENSION
WILL VARY*
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
MINIMUM CABINET WIDTH
33" (838)
30" min (762)
4"
(102)
291/2" (749)
OPENING WIDTH
33" (838)
4"
(102)
291/2" (749)
OPENING WIDTH
5"
(127)
5"
(127)
E
E
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
*Allow enough room for placement of anti-tip block.
Page 8
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
INSTALLATION NOTES
Refer to the illustrations and specifications for
overall dimensions, finished rough opening
dimensions and installation specifics.
Model WWD30 is shipped without any decorative drawer front. It must be installed with one
of the accessory drawer fronts.Refer to the
installation instructions provided with the
warming drawer front for detailed specifications.
These instructions can also be found on the
Wolf website at wolfappliance.com.
Wolf recommends using a 33" (838) wide
cabinet for the warming drawer with stainless
steel drawer front. A minimum 30" (762) wide by
24" (610) deep cabinet is required. A minimum
33" (838) wide cabinet is required for the
warming drawer with integrated drawer front.
The warming drawer with integrated drawer
front can be used in an overlay application, or an
inset panel application where it will be
completely recessed into the cabinet. Keep in
mind that the size of the custom panel for the
warming drawer with integrated drawer front
will vary according to the specific installation.
IMPORTANT NOTE: The inset panel application
for the integrated drawer front requires the
warming drawer to be recessed into the cabinet.
A minimum 25" (635) deep cabinet is needed if
you want the front panel to be flush with
surrounding cabinetry.
The warming drawer platform must be able to
support 200 lbs (91 kg). It must be a minimum
of 1" (25) above the toe kick to allow for the
overlap of the warming drawer trim.
IMPORTANT NOTE: A platform or anti-tip block
must be installed to prevent the unit from tipping
forward when the drawer is opened.
For undercounter installations, 23
1
/2" (597)
from the bottom of the warming drawer opening
to the floor is recommended.
Model WWD30 requires a separate, grounded
120 V AC, 60 Hz power supply. The service
should have its own 15 or 20 amp circuit breaker
and a grounded 3-prong receptacle should be
located within the reach of the 3' (.9 m) power
cord. Locate electrical within the shaded area
shown in the illustrations on pages 4–7.
The Wolf warming drawer may be installed
below an induction, electric or gas cooktop,
provided the warming drawer is fully enclosed,
top and bottom. Refer to the cooktop sections of
our website, wolfappliance.com.
The Wolf warming drawer may be installed
above or below a built-in single oven or below a
double oven, provided the warming drawer is
fully enclosed, top and bottom. Model WWD30
is designed and agency approved for installation
with Wolf built-in ovens. Refer to the built-in
oven sections of our website, wolfappliance.com.
When the warming drawer is installed below
a built-in oven, a minimum of 2
3
/8" (60) between
warming drawer and oven openings— 1
1
/2" (38)
for integrated drawer front—is required for placement of the anti-tip block. To allow the warming
drawer trim and the built-in oven trim to meet, a
7
/8" (22) platform may be used to separate the
two openings. This will act as the support
platform for the oven and the anti-tip device for
the warming drawer.
IMPORTANT NOTE: Additional clearance
between warming drawer and oven openings
may be required. Check that oven supports do
not obstruct the interior dimensions required for
the warming drawer.
IMPORTANT NOTE: When the warming drawer
is installed above a built-in oven, a
7
/8" (22)
platform is required to allow for clearance of
overlaps.
IMPORTANT NOTE: In an overlay application for
the integrated drawer front, the amount of space
between warming drawer and oven openings
may need to be increased depending on the size
of the overlay panel and the amount of overlap.
The warming drawer with stainless steel
drawer front may be installed next to or above
another Wolf warming drawer.
The Wolf warming drawer is designed and
safe for use in outdoor applications. When
installed outdoors, a ground fault circuit interrupter (GFCI) is required to reduce the risk of
electrical shock. All other aspects of the installation are identical for indoor and outdoor use.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
The Wolf warming drawer may be installed in
combination with a built-in single oven and
microwave oven with trim. Be sure that the
drawer front matches the series of oven and
microwave trim you are using in your design.
Refer to pages 9–11 for specifications.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.
Page 9
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
9
Specifications for a warming drawer with L Series stainless steel drawer front installed with a 30" (762) L Series
single oven and convection microwave with 30" (762) L Series trim.
COMBINATION INSTALLATION
The Wolf warming drawer with L Series stainless
steel drawer front may be installed in combination with a 30" (762) L Series single oven and
convection microwave oven with 30" (762)
L Series trim. Refer to the illustration below for
specifications.
Wolf recommends using a 33" (838) wide
cabinet for this installation. Also, you need a
minimum 24" (610) of usable cabinet depth for
the oven.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply for the built-in
oven be placed in an adjacent cabinet within
reach of the conduit.
The base platform for the warming drawer must
be able to support 200 lbs (91 kg), the platform
for the oven must be able to support 250 lbs
(113 kg) and the microwave platform must be
able to support 125 lbs (57 kg).
An anti-tip block or platform must be installed
to prevent the warming drawer from tipping
forward when the drawer is opened. The
warming drawer must be fully enclosed, top
and bottom.
For electrical requirements and additional specifications, refer to the built-in ovens and microwave
sections of our website, wolfappliance.com.
Also refer to the installation instructions
provided with the warming drawer front and
microwave trim kit for detailed specifications.
285/8" (727)
WARMING DRAWER
OPENING WIDTH
281/2" (724)
30-INCH OVEN
OPENING WIDTH
5"
(127)
4"
(102)
E
23/8"
(60)
273/16"
(691)
24"min
(610)
273/16"
(691)
NOTE: Refer to the 30" (762) built-in single oven specifications for electrical location.
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
24"min
(610)
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
ANTI-TIP BLOCK APPLICATIONPLATFORM APPLICATION
7
/8" (22)
PLATFORM
7
/8"
(22)
1"min
(25)
201/8"min
(511)
1811/16"
(475)
1"min
(25)
201/8"min
(511)
1811/16"
(475)
271/2" (699)
CONVECTION MICROWAVE
OPENING WIDTH
5"
(127)
4"
(102)
E
33" (838) REC CABINET WIDTH
30"min (762)
Page 10
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
10
Specifications for a warming drawer with E Series stainless steel drawer front installed with a 30" (762) E Series
single oven and convection microwave with 30" (762) E Series trim.
COMBINATION INSTALLATION
The Wolf warming drawer with E Series stainless
steel drawer front may be installed in combination with a 30" (762) E Series single oven and
convection microwave oven with 30" (762)
E Series trim. Refer to the illustration below for
specifications.
Wolf recommends using a 33" (838) wide
cabinet for this installation. Also, you need a
minimum 24" (610) of usable cabinet depth for
the oven.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply for the built-in
oven be placed in an adjacent cabinet within
reach of the conduit.
The base platform for the warming drawer must
be able to support 200 lbs (91 kg), the platform
for the oven must be able to support 250 lbs
(113 kg) and the microwave platform must be
able to support 125 lbs (57 kg).
An anti-tip block or platform must be installed
to prevent the warming drawer from tipping
forward when the drawer is opened. The
warming drawer must be fully enclosed, top
and bottom.
For electrical requirements and additional specifications, refer to the built-in ovens and microwave
sections of our website, wolfappliance.com.
Also refer to the installation instructions
provided with the warming drawer front and
microwave trim kit for detailed specifications.
RECOMMENDED CABINET WIDTH
33" (838)
30"min (762)
271/2" (699)
201/8"min
(511)
24"min
(610)
7
/8" (22)
PLATFORM
91/8" (232)
237/8"min (606)
1811/16"
(475)
273/16"
(691)
7
/8"
(22)
17/16"
min (37)
ANTI-TIP BLOCK APPLICATIONPLATFORM APPLICATION
201/8"min
(511)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
237/8"min (606)
1811/16"
(475)
min (37)
273/16"
(691)
23/8"
(60)
17/16"
NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the
electrical supply for the oven be placed in an adjacent cabinet within reach of the conduit.
MICROWAVE
OPENING WIDTH
281/2" (724)
OVEN OPENING WIDTH
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 24" (610)
4"
(102)
285/8" (727)
WARMING DRAWER
OPENING WIDTH
5"
(127)
5"
(127)
5"
(127)
E
4"
(102)
E E
E
4"
(102)
Page 11
Planning Information
Warming Drawer
MODEL WWD30
Dimensions in parentheses are in
millimeters unless otherwise specified.
11
Specifications for a warming drawer with integrated drawer front installed with a 36" (914) L Series single oven and
convection microwave with 36" (914) L Series trim.
COMBINATION INSTALLATION
The Wolf warming drawer with integrated drawer
front may be installed in combination with a
36" (914) L Series single oven and convection
microwave oven with 36" (914) L Series trim.
Refer to the illustration below for specifications.
IMPORTANT NOTE: Keep in mind that the width
of the custom panel for the warming drawer
with integrated drawer front will vary according
to the specific installation.
Wolf recommends using a 39" (991) wide
cabinet for this installation. Also, you need a
minimum 24" (610) of usable cabinet depth for
the oven.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply for the built-in
oven be placed in an adjacent cabinet within
reach of the conduit.
The base platform for the warming drawer must
be able to support 200 lbs (91 kg), the platform
for the oven must be able to support 250 lbs
(113 kg) and the microwave platform must be
able to support 125 lbs (57 kg).
An anti-tip block or platform must be installed
to prevent the warming drawer from tipping
forward when the drawer is opened. The
warming drawer must be fully enclosed, top
and bottom.
For electrical requirements and additional specifications, refer to the built-in ovens and microwave
sections of our website, wolfappliance.com.
Also refer to the installation instructions
provided with the warming drawer front and
microwave trim kit for detailed specifications.
24" min (610)
CABINET DEPTH
25" min (635)
CABINET DEPTH
RECOMMENDED CABINET WIDTH
39" (991)
36"min (914)
201/8"min
(511)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
101/4"
97/8"(251)
24" min (610)
OPENING DEPTH
OVERLAY APPLICATION
*Dimension may increase depending on the size of the drawer front panel.
The width of the custom panel for the warming drawer with integrated drawer front will vary according to the specific installation, but the rough opening width will remain 291/2" (749).
(260)
OPENING
HEIGHT
1811/16"
(475)
241/16"
(611)
11/2"min*
(38)
1"min
(25)
97/8"(251)
FLUSH INSET APPLICATION
201/8"min
(511)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
101/4"
(260)
OPENING
HEIGHT
24" (610) + THICKNESS
OF DRAWER FACE
FOR OPENING DEPTH
1811/16"
(475)
241/16"
(611)
11/2"min*
(38)
1"min
(25)
NOTE: Refer to the 36" (914) built-in single oven specifications for electrical location.
333/8" (854)
MICROWAVE
OPENING WIDTH
341/2" (876 )
36-INCH OVEN
OPENING WIDTH
5"
(127)
4"
(102)
291/2" (749)
WARMING DRAWER
OPENING WIDTH
5"
(127)
4"
(102)
E
E
Loading...