Wolf Appliance Company PWC542418R User Manual

Dimensions in parentheses are in
millimeters unless otherwise specified.

6/07

1

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

Wolf Pro wall chimney hoods provide the ultimate

in ventilation. With standard elements like heat sentry
and dual setting halogen lighting, Wolf elevates the
need for ventilation to an enjoyable perk.

The Pro wall chimney hood installed with an optional
6" (152), 12" (305), 18" (457) or 24" (610) classic
stainless steel duct cover completes the chimney
design. With the Pro wall chimney hood you also have
the option of a decorative rail. While a classic stainless
steel rail is standard on the (R) model, platinum or
brass rails are also available to match the bezels of our
dual fuel ranges.

Pro wall chimney ventilation hoods are recommended
for use with all Wolf cooking appliances.

Wolf Pro wall chimney hoods are
available in the classic stainless steel
finish. Rail option hoods (R) come with a
classic stainless steel decorative rail and
stand-offs. Optional platinum or brass
rails match dual fuel range bezels. Pro
wall chimney hoods are sold as a shell
only, internal, in-line and remote blower
options are available.

Classic stainless
steel finish

Backdraft damper

Stainless steel
baffle filters

Infinite-speed
blower control

Location of
rating plate

Halogen lighting

Model PWC542418

Model PWC542418R
Rail Option

Model PWC542418R shown with decorative rail

Hand finished
craftsmanship

Recessed easy­access controls

Welded seams and
hemmed edges

Decorative rail
(optional)

2

FEATURES

Classic stainless steel finish

Optional 6" (152), 12" (305), 18" (457) and

24" (610) duct covers available to complete

the chimney design

Rail option wall hoods (R) come with a

classic stainless steel decorative rail and

stand-offs—optional platinum or brass rail

available to match dual fuel range bezels

Internal, in-line and remote blower options

Heavy-duty 16-gauge brushed stainless steel

construction

Stainless steel enclosed liner

Continually welded seams, hemmed edges

and sides and hand finished craftsmanship

Recessed easy access controls

Infinite speed blower control

Heat sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed

Halogen lighting with two settings

Removable, dishwasher-safe, restaurant­grade stainless steel baffle filters and grease
cups

Transition with backdraft damper included

UL listed to US and Canadian safety
standards

UL approved for covered outdoor applica­tions

Two and five year residential warranty –
exclusions apply; warranty information can
be found on our website, wolfappliance.com

OVERALL DIMENSIONS

Model PWC542418

Model PWC542418R
with Rail

Dimensions in parentheses are in
millimeters unless otherwise specified.

Unit dimensions may vary by ±

1

/8" (3).

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

36" (914)

TOP WIDTH

54" (1372)

OVERALL WIDTH

36" (914)

TOP WIDTH

54" (1372)

OVERALL WIDTH

18" (457)

OVERALL

HEIGHT

4" (102)

18" (457)

OVERALL

HEIGHT

131/2"

(343)

24" (610)

OVERALL DEPTH

131/2"

(343)

24" (610)

OVERALL DEPTH

4" (102)

3

/4" (19)

DIAMETER

OF RAIL

2"

(51)

3

Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

SPECIFICATIONS

Overall Width of Hood 54" (1372)

Overall Height of Hood 18" (457)

Overall Depth of Hood – PWC542418 24" (610)
PWC542418R (including rail) 26" (660)

Internal Blower Option 1200 CFM

In-Line Blower Option 1100 CFM

Remote Blower Options 900, 1200 or 1500 CFM

Discharge Vertical

Duct Size 10" (254) Round

Electrical Supply Requirements 110 / 120 V AC, 60 Hz

15 amp dedicated circuit

Shipping Weight (shell only) 106 lbs (48 kg)

Specifications are subject to change without notice.

BLOWER OPTIONS

1200 CFM Internal Blower 804703

as of Fall 2007 801317

1100 CFM In-Line Blower 808332

900 CFM Remote Blower 801641

1200 CFM Remote Blower 801642

1500 CFM Remote Blower 804701

Refer to Pro Ventilation Recommendations
at the end of this section.

ACCESSORIES

Platinum or brass decorative rail

and stand-offs

38" (965) high stainless steel

backsplash with warming racks

38" (965) high stainless steel

backsplash

6" (152), 12" (305), 18" (457) and

24" (610) duct covers

Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Locator section of
our website, wolfappliance.com.

4

DIMENSIONS

Overall Width of Hood 54" (1372)

Overall Height of Hood 18" (457)

Overall Depth of Hood (excluding rail) 24" (610)

Countertop to Bottom of Hood 30" (762) to 36" (914)

Location of Electrical Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

INSTALLATION SPECIFICATIONS

Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

30" TO 36"

(762–914)

TO COUNTERTOP

LOCATION OF

ELECTRICAL

54" (1372)

WIDTH OF HOOD

6"

(152)

E

5"

(127)

18" (457)

HEIGHT

OF HOOD

30" TO 36"

(762–914)

TO COUNTERTOP

24" (610)

DEPTH OF HOOD

NOTE: Pro wall chimney hoods have a vertical discharge.

5

Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

INSTALLATION NOTES

Refer to the illustrations and specifications
for overall dimensions and installation specifics.

Wolf Pro wall chimney ventilation hoods are
recommended for use with any Wolf cooking
appliance, and should be as least as wide as
the cooking surface. It is recommended that the
hood overlap the cooking surface by 3" (76) on
either side.

Optional 6" (152), 12" (305), 18" (457) and
24" (610) duct covers are available as a sales
accessory to complete the chimney design.

Installation of all Pro wall chimney hoods
should be 30" (762) to 36" (914) from the
bottom of the hood to the countertop. Follow
the dimensions shown in the Installation
illustration.

Wolf Pro wall chimney hoods are shipped
without a blower assembly. Internal, in-line or
remote blower assemblies are available. Blower
options also vary with the volume of air that
needs to be moved and the length of the duct
run. Refer to page 8 for Pro Ventilation CFM
Recommendations and Blower Options.

IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.

Pro wall chimney hoods require a separate,
grounded 110/ 120 V AC, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker. Placement of the electrical supply is
not critical, as long as you provide enough 120
V AC, 60 Hz power cable to make the electrical
connection. Locate electrical within the shaded
area shown in the Installation illustration.

You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.

Refer to the installation instructions shipped
with each Wolf product for detailed specifica­tions. This information can also be found on
our website, wolfappliance.com.

6

Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

Ducting for Pro wall
chimney hoods.

DUCTWORK INSTALLATION

THROUGH ROOF

24" (610)

DEPTH OF HOOD

ROOF CAP OR REMOTE BLOWER

10" (254) ROUND DUCT

SOFFIT OR CABINET

OR DUCT COVER

NOTE: VERTICAL DISCHARGE ONLY FOR PRO WALL CHIMNEY HOODS.

VERTICAL DISCHARGE

TRANSITION

14"W x 9

3

/4"D TO 10" ROUND

7"H (INCLUDING FLANGES)

30" TO 36"

(762–914)

COUNTERTOP

TO BOTTOM OF

VENTILATION HOOD

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

18" (457)

HEIGHT

OF HOOD

163/4" (425)

TOP OF WOOD

MOUNTING STRIP

WALL HOOD

DUCTING CONSIDERATIONS

Wolf Pro wall chimney ventilation hoods are
shipped without the blower assembly. Internal,
in-line and remote blower assemblies are
available.

IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.

Wolf Pro wall chimney hoods have a vertical
discharge location with 10" (254) round duct.
A transition with backdraft damper is included.
The hood will operate most efficiently when
ductwork does not exceed 50' (15 m) in length.

Local building codes may require the use of
make-up air. Consult your local HVAC profes­sional for specific requirements in your area.

IMPORTANT NOTE: Wolf Pro wall chimney
hoods must be vented to the outside. Use only
metal ductwork.

Refer to the illustration below for ducting
considerations for Pro wall chimney hoods.

7

Dimensions in parentheses are in
millimeters unless otherwise specified.

Unit dimensions may vary by ±

1

/8" (3).

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

WOLF BLOWER ASSEMBLIES

A ventilation system must include a blower
assembly. Wolf ventilation hoods are shipped
without the blower assembly. An internal, in-line
or remote blower assembly must be selected to
accommodate the cooking appliance, CFM
requirements and homeowner preferences.
Internal, in-line and remote blower assemblies
are available as sales accessories through your
Wolf dealer.

IMPORTANT NOTE: Use only a Wolf blower
with all Wolf ventilation products.

Internal blowers are mounted inside the hood
canopy. In-line blowers are mounted in between
the hood and the exterior of the home. Remote
blowers can be mounted on the roof or in some
cases, on an exterior wall. Refer to the illustra­tions below for dimensions of Wolf in-line and
remote blowers.

Pro ventilation recommendation charts on the
following page provide minimum CFM recom­mendations according to the cooking appliance
and ventilation hood used and blower options
for each specific Pro wall chimney hood.

In-line BLOWER-110IL

Remote BLOWER-90REM Remote BLOWER-120REM Remote BLOWER-150REM

7

24

"

/8

(632)

18"

12"

(457)

(305)

8"

(203)

22"

(559)

18"

(457)

21" (533)

10"

(254)

29

"

25"

(635)

7

(184)

28

(718)

3

20

"

/4

10" (254)

Diameter

3

24

/4

(629)

(527)

1

24

"

/2

(622)

3

4

"

/4

"

(121)

29

(749)

1

"

/2

10" (254)

Diameter

3

14

"

/4

(375)

1

10

/8

(257)

1

"

/4

1

15

"

/2

(394)

14"

(356)

18" (457)

10"

(254)

1

/2

29

"

(749)

"

22"

(559)

7

(184)

1

"

/4

29

(749)

1

"

/2

10" (254)

Diameter

3

14

"

/4

(375)

3

10

/8

(264)

(749)

1

1

"

/2

"

/4

8

Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information

Pro 54" (1372) Wall Chimney Hood

MODEL PWC542418(R)

Pro Wall Chimney Hoods

Model PWC362418 PWC422418 PWC482418 PWC542418

DF304 / R304 / SRT304 600 600

DF366 / R366 / SRT366 / RT366 900 900

DF364 / R364 / SRT364 / RT364 900 900

RT362 900 900

R488 / RT488 1100 1100

DF486 / R486 / SRT486 / RT486 1100 1100

DF484 / R484 / SRT484 / RT484 1100 1100

Minimum CFM requirements for Wolf ranges and rangetops. Additional CFM may be required for charbroilers, griddles
and long duct runs.

PRO VENTILATION CFM RECOMMENDATIONS

PRO VENTILATION BLOWER OPTIONS

Pro Wall Chimney Hoods

Blower Description Blower Number Wall Chimney Hood Models

600 CFM Internal CTBLOWER-60INT (801644 – 810314 as of Fall 2007) PWC362418 / PWC422418

900 CFM Internal CTBLOWER-90INT (801645 – 810315 as of Fall 2007) PWC362418 / PWC422418

1200 CFM Internal IBLOWER-120INT (804703 – 810317 as of Fall 2007) PWC482418 / PWC542418

1100 CFM In-Line BLOWER-110IL (808332) All Pro Wall Chimney Hoods

900 CFM Remote BLOWER-90REM (801641) All Pro Wall Chimney Hoods

1200 CFM Remote BLOWER-120REM (801642) All Pro Wall Chimney Hoods

1500 CFM Remote BLOWER-150REM (804701) All Pro Wall Chimney Hoods