6" Unframed Induction Cooktop
3
Induction cooking has been used in
Europe for decades by professionals and
homeowners demanding the best in
performance. Induction cooking is so efficient that it out-performs gas and electric
cooktops. There is no wasted heat
because energy is supplied directly to the
cooking vessel. With Wolf’s unframed
induction cooktops there’s no stainless
steel trim, just the sophisticated, minimalist exterior subtly patterned design to
hide any unsightly scratches.
Model CT36IU shown in flush mounted installation.
FEATURES
• Can be mounted flush with top of counter-
top or as a frameless installation sitting on
top of the countertop surface.
• Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat.
• Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface.
• Five high-efficiency induction elements
deliver power and control.
• Maximum element power: 3000 W with
4000 W boost, (2) 1800 W with 3000 W
boost and (2) 1200 W.
• True simmer setting on three elements.
• Melt setting on two elements.
• Cookware sensing—elements will not be
energized without an induction-compatible
pan on the cooktop surface.
• Hi-Power mode boosts power on 1800 W
elements by diverting power from adjacent
element —4000 W element does not divert
power from adjacent element for boost.
• Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded.
• Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume.
• Hot-surface indicator light in control panel.
• Lock mode—cooktop will be locked so
that no elements can be turned on.
• Universal OFF turns all elements off.
• Countdown timer with 1 to 99 minute
range.
HOW DOES INDUCTION
COOKING WORK?
The electricity flows through a coil to
produce a magnetic field under the ceramic
cooktop. When a cast iron or magnetic
stainless steel pan is placed on the ceramic
glass surface, currents are induced in the
cooking utensil and instant heat is generated due to the resistance of the pan.
Induction only works with cooking vessels
made of magnetic materials, such as cast
iron and magnetic stainless steel (it will not
work with aluminum or copper pots).
Hi-Power boost control.
Model CT36IU
36" Unframed Induction Cooktop
36" (
914)
4" (
104)
11/4" (
32)
7
/8" (22)
ALL SIDES
TERMINAL BOX
21" (533)
18" (457) min
36" (914)
FLOOR TO
COUNTERTOP
30" (762) min
COUNTERTOP
TO COMBUSTIBLE
M
ATERIALS
36-INCH OVEN OPENING
41/2"
(
114
)
10" (254)
31/2" (89)
E
SEE COUNTERTOP
CUT-OUT BELOW
343/8" (873)
CUT-OUT WIDTH
COUNTERTOP CUT-OUTRECESS FOR FLUSH INSTALLATION
FRONT
193/8" (492)
CUT-OUT
DEPTH
27/16" (62) min
211/8" (537)
RECESS
FOR FLUSH
INSTALLATION
19/16"
(40)
4"
(
102)min
2" (
51)
TO
COMBUSTIBLE*
2" (
51)
TO
COMBUSTIBLE*2" (51)*
SIDE
C
ABINET
13" (330)
max
*Minimum clearance from cooktop cut-out to combustible materia ls up to 18" (457) above countertop.
NOTE: Electrical location applies only to installation with bui lt-in oven.
5
/16"
(8)
7
/8"
(22) max
COUNTERTOP
PROFILE
15/16" (33)
RADIUS
7
/16" (11) RADIUS
361/8" (918)
RECESS FOR FLUSHINSTALLATION
OVERALL DIMENSIONS
Unit dimensions may vary by ±1/8" (3).
SPECIFICATIONS
Overall Width 36"
Overall Height 4"
Overall Depth 21"
Induction Elements Five
Countertop Cut-Out Width 343/8"
Countertop Cut-Out Depth 193/8"
Maximum Element Power (2) 1200 W
(2) 1800 W with 3000 W boost
(1) 3000 W with 4000 W boost
Element Diameters
51/2", 63/4", (2) 83/4" and 11"
Electrical Requirements 240/208 V AC
Conduit 4' flexible 3-wire
Electrical Rating 10.2 kW at 240 V
Shipping Weight 70 lbs
50/ 60 Hz, 50 amp circuit
8.9 kW at 208 V
INSTALLATION SPECIFICATIONS
INSTALLATION NOTES
Unframed induction cooktops can be
mounted flush with the top of the countertop
or as a frameless installation sitting on top
of the countertop surface.
Complete installation specifications can be
found on our website, wolfappliance.com.
Dimensions in parentheses are in
millimeters unless otherwise specified.
©Wolf Appliance, In c. all rights reser ved. Features and specifications are subjec t to ch ange at any time without notice. 1/ 10