XT60 - Electric hedge cutter |
Page 1 sur 1 |
XT60 - Electric hedge cutter
Clic on
Caracteristics
Power : 500 W Blade length : 60 cm
Spacing of blades : 22 mm Architecture
Weight : 4,7 kg Performances Transmission : 1 stage
Number of cuts : 3200 min-1
Blade stopping time : instant (<=0.03 second) Equipment
Protective storage sheath. Rail with aluminium finish. Anti-impact end stop.
2 starter controls Patented armrest. Handle that turns 180°
3 integrated oilers (principle patented by Outils Wolf). 250ml lubricant spray included.
Transparent protective shield. Product advantages
Careful ergonomics and very well balanced device.
Thanks to the depositing of oil on the blades, friction on them is limited and the power of the hedge cutter increased.
Maximum safety (two-hand control, mechanical blade stoppage). Positioning
A particularly easy to handle hedge cutter, very effective for big jobs. Use : General public
New : yes Accessories
Special overmoulded cable (25m) VV25 Special overmoulded cable (50m) VV50 Guarantee
2 years private use, 1 year professional use.
http://www.outils-wolf.net/?tagSuffix=detail_outillage_taillehaie&module=product&... 07/10/2009